Overview

---

After we found there might be revolutionary usage about the mating type switch (MTS) of yeasts in our heavy metal deposition system, In laboratory, the species of budding yeast we usually used are BY4741 and BY4742, whose HO gene are knocked out. Therefore, we intended to use two groups of MATa yeasts to realize the mating switcher.

One of these groups was required to achieve MTS. We decided to achieve MTS by introducing the HO gene into this group of yeasts— Saccharomyces cerevisiae (BY4741, in our lab, whose chromosome Ⅹhas been switched by synthetic chromosome Ⅹ. And it has been renamed as SynⅩsimilarly hereinafter.) . To make the MTS controllable, it is necessary for us to adopt inducible promoters to initiate the expression of HO gene or create a pathway functioning as single gene regulator. Eventually, we landed on the Gal1 promoter first, for its convenience and efficiency. As we read in R. Scott McIsaac’s work, their the rapid, tunable, single-gene specificity control system of single gene in yeasts has given us much impression. Therefore, we decided to use this system as one of our pathway designs for the expression of HO gene.

1. Getting the chassis.

---

Aiming to achieve MTS for environmental use, it is essential to make sure that when the MAT locus has DSB(double strands break) cleaved by HO, our type-a (MATa) yeast can only become type-α (MATα). Therefore, we used a Ura-tag to replace the HMR(a) domain in chromosome Ⅲ. In this way the HMR will no longer be the donor for the homologous recombination in the repairing process for MAT cleavage.

Since the change of mating type may appear successively, there is a great possibility that the same type haploid mate with each other. To avoid the existence of meaningless mating , we built an vector to express MATα genes to produce a1-α2 stable corepressor so that the haploid will regard itself as a diploid and prevent mating unless the MATa locus changes to the other one. After selection, by homologous recombination, we deleted the Ura-tag for further usage. We selected the target colonies(SynⅩdUra) via 5Foa plates. (P1)

2. Construction of systems

---

(1) Gal System

In this pathway, we chose Gal1 as our promoter for the expression of HO gene, CYC1 as the terminator, and PRS416(with Ura-tag) as our vector. As for segments ligation, we design the cutting sites for Bsa1 enzyme in each part, hoping to achieve seamless ligation of these three parts.

We adopted the PCR method to amplify the Gal1-part and CYC1-part from a Gal1-Vika plasmid we had used in our former lab work. We designed specific primers for this procedure. After PCR, the Gal1 has the cutting sites for SalⅠand BsaⅠon both ends, and CYC1 has that for BsaⅠand BamhⅠon both ends. Meanwhile, the HO gene was obtained by gene synthesis, flanked by specific hangtags for BsaⅠto be cohesive with Gal1 upstream and CYC1 downstream. Thus, we have built our composite part (GHC).

After the ligation, we transformed the E.coli for the augment of the PRS416 plasmid with GHC. (GHC-416) And eventually, we transformed our SynⅩ-dUra for the GHC-416 to get our target yeasts——SynⅩ-dUra-416.

(2) Modified. Gal1 system

In this pathway, we introduced one kind of artificial transcription factor (ATF)—Z4EV into the regulation of HO gene expression. With Z4EV working with our Modified. Gal1 promoter, we hoped to reach the on off-target dynamic control of HO gene expression. Our designing for getting the Modified. Gal1-HO-CYC1 parts (MGHC) is quite the same as that for GHC mentioned above, only that we acquired our Modified. Gal1 part from the gene synthesis. （P2）

As for the expression of Z4EV gene, we intended to induce it into the SynX chromosome in SynⅩ-dUra by homologous recombination. With overlap PCR strategy, we put an homologous domain CanA (originally from Can gene in chromosome X) in the upstream of the promoter of Z4EV. Thus, we got our CanA-TEF-Z4EV part. Then we planned to use Tdh2t as terminator attached with Leu-CanB (another part of Can gene).

Next, for double using the Leu-tag, we introduce Vika/vox system. We intended to attach the Vika operator (Tdh3p-Vikc-Tdh2t, TVT) following the Z4EV gene. We had two groups of yeasts, as mentioned above, one of them aimed to accomplish MTS and becoming MATα, the other with functional genes remained as MATa. According to our design, the former will express Vika recombinase, and the other contain functional genes whose expressions are controlled by vox-Terminator-vox structure. Thus, the function gene’s expression will be initiate during the cell fusion in yeast mating process. (P3)

3. Test of MTS

---

In this section, we only got to test the Gal System due to time limits. And we figured that the results for Gal System is adequately enough to represent the feasibility of our designed strategy for MTS.

The whole test process can be divided into three steps.

Step 1:

Activate the Gal1 promoter. After that, the expression of HO gene in the SynⅩ-dUra-416 can be initiated.

Step 2:

Cultivate two groups of yeasts together. (one is SynⅩ-dUra-416, the other is normal BY4741 MATa) If the MTS has been accomplished (SynⅩ-dUra-416 can become MATα), the two groups of haploids can mate with each other and become diploids.

Step 3:

Test the results of mating by PCR method. We designed the primers for both MATa locus and MATα locus. The amplification of both MATa locus and MATα locus indicates that the yeasts has turned into diploids, the MTS has been achieved in other words.

Background

---

Mating switch of yeasts

Saccharomyces cerevisiae is a single-celled organism with three types, called a, α, and a/α. In Saccharomyces cerevisiae, three cell types differ from each other in their DNA content at the MAT locus which specifies the cell types. In nature, the two haploid cell types (a and α) of budding yeast are able to interconvert in a reversible manner by DNA-rearrangement with a DSB at the MAT locus, and this process is called mating-type switch.

The DSB at MAT locus is caused by HO endonuclease (a kind of site-specific endonuclease expressed by HO gene). DSBs in chromosomes can be repaired either by homologous recombination (HR) or by nonhomologous end-joining (NHEJ). In S.C haploids, the DSB caused by HO endonuclease mostly repaired by HR with HML(α) and HMR(a) as donors. If the donor is HML(α), the mating-type will become α, and vice versa. In this way, a haploid budding yeast is able to achieve mating-type switch. (P4)

Artificial Transcription Factors——Z4EV

Thanks to R. Scott McIsaac and Benjamin L. Oakes’s former work, we learned that Z4EV is a kind of fusion protein with three domains – DNA binding domain (DBD), estrogen receptor (ER) and VP16 activation domain. In the absence of β-estradiol, the ER interacts with Hsp90 chaperone complex and keep the ATF out of the nucleus. This AFT will provide a strong transcriptional activator that is dependent on the presence of β-estradiol. By using a synthetic 4-time-repeated zinc-finger DBD array from the mouse TF Zif268, residual off-target effects have been totally avoided.

Z4EV (the Z4EV gene has been induced into the SynX chromosome of this group of haploids) to strictly control the expression of HO gene. Unlike common β-estradiol-induced or galactose-induced promoters, this modified promoter is designed to be activated only when it is specifically bound with activated Z4EV factor. (P5)

Overview

---

Vika-vox system is used in our project in order to switch the expression from RFP to β-carotene, as a characterization of our Mating Switcher. In this way, we can easily visualize the function of our switcher through its color, as well as measure its efficiency and error rate.

Vika-vox system mainly consists of vox sites and reporting parts. At first the expression of RFP will be activated and the expression of β-carotene will be inhibited so that we can detect red fluorescence when vika enzymes doesn’t exist in Saccharomyces cerevisiae. After the expression of vika enzymes, with the deletion of RFP and terminators flanked by vox locus, β-carotene expresses and the strains take on an orange color. This is the whole characterization process of Mating Switcher.

Theoretical Background

---

VIKAVOX

Experiment Design

---

1.Construction of vox-ura3-vox System

We use synthetic chromosomeⅤof Saccharomyces cerevisiae to load our device, which is a single-celled organism calleda. First of all, we use PCR to amplify basic parts including TEF promotor, ura3 gene, ura3-terminator and β-carotene gene. Among them, ura3 gene and ura3-terminator are flanked by vox locus. Then we use overlap PCR to combine these parts together. The next step is transform this composite part into Saccharomyces cerevisiae. We screen for the correctly transformed cell by using the Sc-Ura plate. For the purpose of verifying desired strain TVUVC, we use colony PCR to amplify theTEF promoter-vox-ura3 gene and ura3 terminator-vox-β-carotene gene. The length of the strip was observed by agarose gel electrophoresis

2.Construction of vox-RFP-vox System

This system has a great similarity to the vox-ura3-vox system above. Therefore, it is easy to construct because we only need to change the ura3 gene to the RFP gene. We use PCR to amplify five basic prats including TEF promotor,RFP gene, Adh1 terminator, ura3-terminator and β-carotene gene. Among them,RFP gene and ura3-terminator are flanked by vox locus. Then we use overlap PCR to combine these parts together. After that we use the lithium acetate conversion method to transfer this composite part into TVUVC. We screen for the correctly transformed cell by using the 5-FOA plate. This part will integrate into chromosomeⅤ by homologous recombination, and we will get another desired strain called TVRVC.

3.Verification of RFP in the TVRVC

The verification of RFP is carried out by using colony PCR to amplify the TEF promoter-vox-RFP gene and ura3 terminator-vox-β-carotene gene. We can observe the length of 1122bp band and 1391bp band by agarose gel electrophoresis, which determine the existence of vox sites and RFP gene. Then we can detect the red fluorescence.

4.Method of Red Fluorescence Assay

We used a variant of the mCherry red fluorescent protein (RFP). The variant sequence was codon-optimized for the expression in Saccharomyces cerevisiae as yeast-enhanced mRFP (yEmRFP) and can combine fluorescence and a purple visible phenotype. Unfortunately, the RFP can’t be directly observed by bare eyes, we decided to use the Fluorescence spectrophotometer and use OD600 to determination cell concentration. Meanwhile, we will observe using fluorescence microscopy for fluorescent proteins expression. The red color can be observed if yEmRFP is expressed.

5.Construction of vika System

We use a common expression vector plasmid, pRS416, to load vika part. First of all, we use corresponding restriction endonuclease Sal1 and Not1 to cut plasmid pRS416 and plasmid pRS415-vika, a gift from Y.J lab, and then use T4 DNA ligase to link them together, we can obtain the complete device we want. Finally, we transform this device into BY4742 by the lithium acetate conversion method, and we screen for the correctly transformed cell by using the Sc-Ura plate. BY4742 is a single-celled organism called α.

6.The characterization of Mating Switcher

The Saccharomyces cerevisiae called TVRVC is a single-celled organism called a. At first, we cultivate pRS416-vika in Sc-Ura medium without glucose for three hours. To induce the expression of vika, they will culture to saturation in Sc medium with raffinose and galactose for twelve hours. After that, vika recombinase are induced to express and we make α-pRS416-vika cell and a-TVRVC cell mate in YPD medium for eight hours. Two types cells are fused and form diploid yeasts, in which vika recombinase bind with vox locus, and then delete RFP gene and Adh1 terminator flanked by vox sites. After the Mating Switcher, β-carotene expresses and he color of cell will transform from white to orange. At last we smear bacteria solution on Sc-Ura-Leu plate to screen for the correctly mating cell. We can judge the existence of vika recombinase by the color of the colony, and obtain the efficiency of mating.

7.Culture and Expression Condition of Saccharomyces cerevisiae in this experiment

Traditional YPD culture medium (22g/L glucose, 20g/L peptone, 10g/L yeast extracts) is used by us. Sc-Ura solid culture medium (22g/L glucose, 6.7g/L yeast nitrogen base, 1.224g/L nutrient deficiency mixture without Ura, His, Leu and Trp, 20g/L agar powder, 5mg/L Trp, His and Leu) is used to screen for correctly transformed cell. 5-FOA solid culture medium (22g/L glucose, 6.7g/L yeast nitrogen base, 1.224g/L dropout, 20g/L agar powder, 1ml/L His, Trip, Leu and 2.5ml/L Ura) is used to screen for correctly transformed cell. Sc medium with raffinose and galactose culture medium (20g/L raffinose, 6.7g/L yeast nitrogen base, 1.224g/L nutrient deficiency mixture without Ura, His, Leu and Trp, 20g/L agar powder, 10x galactose, 5mg/L Trp, His and Leu) is used to induce to express vika recombinase. Sc-Ura-Leu solid culture medium(22g/L glucose, 6.7g/L yeast nitrogen base, 1.224g/L nutrient deficiency mixture without Ura, His, Leu and Trp, 20g/L agar powder, 5mg/L Trp and His) is used to screen for the correctly mating cell. All the cells are cultured in 5mL medium at 30℃ with shaking speed of 220rpm.

Expected Results

In our design, Mating Switcher is a means of gene regulation. We can transform from one functional system to another system through this switch conveniently. To show the function of Mating Switcher more intuitively, we construct this RFP system to be a characterization.

Overview

Synthetic chromosome rearrangement and modification by loxP-mediated evolution(SCRaMble) generates combinatorial geomic diversity through rearrangements at designed recombinase sites. We applied SCRaMble to Saccharomyces cerevisiae（synX）to attain strains with better tolerance to high concentration of cadmium ion and cupric ion solution and compared the growing condition with the original strains to demonstrate the validity of SCRaMble.

Theoretical Background

Sc2.0 Project

Synthetic Yeast Genome Project (Sc2.0) is the world’s first synthetic eukaryotic genome project that aims to create a novel, rationalized version of the genome of the yeast species Saccharomyces cerevisiae. On March 10th, 7 articles related to Sc 2.0 were published on Science. As a member of Sc 2.0, YJ lab has completed two synthetic yeast chromosomes, and two articles are published on Science discussing about challenging but exciting task of building synthetic chromosomes V, X .

Cre-loxpsym System

As a part of the Sc2.0 Project , yeast chromosomes are targets, named loxPsym sites. loxPsym sites are substrates for Cre-EBD , which is an inducible form of the appropriate site-specific recombinase. Unlike the native directional loxP site, which permits a single orientation for recombination, the synthetic loxPsym site’s symmetry ensures that any pair of sites can recom- bine in either orientation. Then, controlled expression of Cre-EBD lead to deletions and inversions with chromosome segments flanked by loxPsym sites. This characteristic allows more possibilities of recombination on yeast chromosome which lives up to our expectations.

Experiment Design

Construction of Cre-loxpsym System

First, We use two common expression vector plasmid, PRS416 and PRS413(with different nutrition label), in Saccharomyces cerevisiae to load our device, which consists of heterologous gene part (PCLB2 promoter, Cre-EBD gene, CYC1 terminator) . Second, we transform the pSCW11-CRE/EBD plasmid into synX strain , respectively and get three strains with Cre-EBD, 079 and 160 with ura tag ,085 with his tag.

Then, under the cell culture environment with traces of estradiol(1μL of 5mM estradiol / 5mL media), three strains are incubated at 30℃for 6 hours. After dilute 1000 times and wash 2 times with water to remove estradiol and spot on on SC plates with gradient concentrations of copper ion and cadmium ion.

Finally, incubate plates for 3 days at 30℃ and observe the growth of strains.

Screening of Strains with High Tolerance

Aiming at screening strains with tolerance to high concentration of cadmium ion and cupric ion solution, we prepare SC culture medium with 3mM, 4mM, 4.5mM, 5mM, 5.5mM, 6mM, 6.5mM, 7mM copper ion and SC culture medium with 0.01mM, 0.05mM, 0.1mM, 0.15mM, 0.2mM cadmium ion. Though detecting the number, size of colony of different strains on SC plates with gradient concentrations. We further narrow the range of concentrations and screen strains with optimal characteristics.

Verification of Cre-EBD Effect (Dilution Assay and Measurement of cell survival rate)

To demonstrate the verification of Cre-EBD effect, we diluted optimal strains to 10-1、10-2、10-3、10-4、10-5 and made dilution assay on SC culture medium with copper ion and cadmium ion. Obviously if optimal strains grow better than other blanks, the answer is YES.

What's more, we measure the survivial rate of optimal strains with original strains synX. After cultivating yeasts in YPD overnight, we take 200μL culture medium into ultrahigh concentration copper ion and cadmium ion solution. Then, coate plate after 10min, 30min, 1h and 2h. Through counting the number of colony, we can obtain and compare the curve describing the cell survival rate of optimal strain and synX.

Overview

---

Based on the vika-vox system, we have designed the mating switcher, which will solve the problem of absorbing heavy ions separately.

Between the two vox sites, we inserted the Cup1 gene and the Ura3 terminator. Then, CdM gene follows the vox site. At first the Copper metallothionein is expressed to enrich copper ions in Saccharomyces cerevisiae. Then, under the influence of vika enzyme, Cup1 is deleted and CdM gene is activated. Another metallothionein that has strong affinity for cadmium ions begin to combine cadmium ions. copper and cadmium were detached from our system separately

background

---

Cup1 and CdM are two kind of metallothionein which can combine copper ion and cadmium ion separately

---

Experiment Design

---

1. construction of Cu-Cd Saccharomyces cerevisiae

Similar to the construction of the vox-RFP-vox system, we construct this genetic circuit on vox-ura3-vox system. We use PCR to amplify TEF promoter, Cup1 gene and ura3 terminator. Through overlapping, all parts are linked together with Cup1 gene and ura3 terminator flanked by vox sites. 5-FOA plate help us to screen the correct cell after transferring. We insert the CdM gene and the ura3 nutrient label in the same way so that we get complete genetic circuit as figure(1) showing below.

2. adsorption of copper ions

In order to examine the absorption effect of Cu-Cd Saccharomyces cerevisiae , We cultured my yeast in YPD medium containing copper ions . It is observed that the growth of Cu-Cd Saccharomyces cerevisiae is not ideal in high concentrations of copper ion. To accumulate them, Cu-Cd Saccharomyces cerevisiae is cultured for 24 hours YPD medium without heavy metal ions.

Then we add the copper ion into the culture medium so that the concentration of copper ions in the environment is 6mmol / L. Next, yeast suspension is taken as a sample once every 4 hours during the 40-hours culturing process. We used the flame atomic absorption spectrometry to measure the concentration of copper ions in supernatant. According to the concentration change of copper ions at equal time intervals. We depict the adsorption curve of copper ions with time changing.

3 Separation of copper and cadmium ions

The enriched Cu-Cd Saccharomyces cerevisiae is cultured in heavy metal fluid medium which contain 6mmol/L copper and 8mg/L cadmium. We still take the sample every 4 hour and measure the concentration of heavy metal ions. But the mating switcher is activated at XX hour. Through portraying the changing curve of copper and cadmium, the effect of separation is emerged.