Difference between revisions of "Team:BNU-China/Design"

Line 91: Line 91:
 
             <h2 id="title1">Overview</h2>
 
             <h2 id="title1">Overview</h2>
 
             <h3>Materials</h3>
 
             <h3>Materials</h3>
             <p>To achieve our goal, the materials we use should be self-assembly protein subunits that can polymerize long fibrous protein. After searching and comparing many materials, we finally choose α-\β-tubulin and flagellin.
+
             <p>To achieve our goal, the materials we use should be self-assembling protein subunits that can polymerize into long fibrous proteins. After searching and comparing many materials, we finally chose α-\β-tubulin and flagellin.
 
                 <br>
 
                 <br>
 
             </p>
 
             </p>
Line 100: Line 100:
 
             <h3>Display module</h3>
 
             <h3>Display module</h3>
 
             <p><b>A-agglutinin System</b>
 
             <p><b>A-agglutinin System</b>
           <br>Among various GPI-anchored proteins, α/a-agglutinins are one of the most common proteins have been utilized for the display of proteins on a yeast cell surface. The native a and α agglutinin receptors are believed to act as adhesion molecules to stabilize cell-cell interactions during mating and to facilitate fusion between the a and α haploid yeast cells. A-agglutinin has a core subunit encoded by AGA1 and a binding subunit encoded by AGA2. Both a-agglutinin and the core subunit of a-agglutinin consist of a secretion-signal region, a functional region, a support region, and a putative GPI anchor-attachment signal. After genetic engineering, foreign protein can be fused to the C-terminal of the binding subunit of a-agglutinin. As AGA1 protein is secreted from the cell and becomes covalently attached to the β-glucan in the extracellular matrix of the yeast cell wall, aga2 protein fused with foreign protein on its C-terminus will then bind to aga1p through two disulfides bonds. As a result, the heterologous proteins are covalently linked with glucan-layer.
+
           <br>Among various GPI-anchored proteins, α/a-agglutinin is one of the most common proteins that have been utilized for the display of proteins on a yeast cell surface. The native a and α agglutinin receptors are believed to act as adhesion molecules to stabilize cell-cell interactions during mating and to facilitate fusion between the a and α haploid yeast cells. A-agglutinin has a core subunit encoded by AGA1 and a binding subunit encoded by AGA2. Both a-agglutinin and the core subunit of a-agglutinin consist of a secretion-signal region, a functional region, a support region, and a putative GPI anchor-attachment signal. After genetic engineering, foreign proteins can be fused to the C-terminal of the binding subunit of a-agglutinin. As AGA1 protein is secreted from the cell and becomes covalently attached to the β-glucan in the extracellular matrix of the yeast cell wall, aga2 protein fused with a foreign protein on its C-terminus will then bind to aga1p through two disulfides bonds. As a result, the heterologous proteins are covalently linked with the glucan-layer.
 
                 <br>
 
                 <br>
 
             </p>
 
             </p>
             <p>There has to be mentioned that AGA1 gene is controlled by GAL10 promotor in the genome of S. cerevisiae EBY100 strain, while AGA2 gene is controlled by the GAL1 promotor on the vector pYD1. (see figure 1)
+
             <p>It is worth mentioning that AGA1 gene is controlled by GAL10 promotor in the genome of S. cerevisiae EBY100 strain, while AGA2 gene is controlled by the GAL1 promotor on the vector pYD1. (see figure 1)
 
             </p>
 
             </p>
 
             <img src="https://static.igem.org/mediawiki/2017/4/4a/T--BNU-China--design1.jpg" alt="Sorry, the image is not supported by your browser.">
 
             <img src="https://static.igem.org/mediawiki/2017/4/4a/T--BNU-China--design1.jpg" alt="Sorry, the image is not supported by your browser.">
Line 112: Line 112:
 
             <p><b>Alpha-factor</b>
 
             <p><b>Alpha-factor</b>
 
                 <br> We use α-Factor to facilitate the secretion of our exogenous proteins. (see Figure 2)
 
                 <br> We use α-Factor to facilitate the secretion of our exogenous proteins. (see Figure 2)
                 <br> α-Factor is a 13-residue peptide, secreted by cells of α mating type, that acts on cells of the opposite a mating type to promote efficient conjugation between the two cell types leading to the formation of aα diploid cells. α-factor is synthesized as a precursor of 165 amino acids containing an 83-residue leader and four α-factor coding regions, each preceded by a short spacer peptide.
+
                 <br> α-Factor is a 13-residue peptide, secreted by cells of α mating type, that acts on cells of the opposite mating type to promote efficient conjugation between the two cell types, which leads to the formation of aα diploid cells. α-factor is synthesized as a precursor of 165 amino acids containing an 83-residue leader and four α-factor coding regions, each preceded by a short spacer peptide.
 
             </p>
 
             </p>
 
             <img src="https://static.igem.org/mediawiki/2017/0/0b/T--BNU-China--design2.jpg" alt="Sorry, the image is not supported by your browser.">
 
             <img src="https://static.igem.org/mediawiki/2017/0/0b/T--BNU-China--design2.jpg" alt="Sorry, the image is not supported by your browser.">
Line 119: Line 119:
 
       (Lin-Cereghino GP, Stark CM, Kim D, et al. 2013)<br><br>
 
       (Lin-Cereghino GP, Stark CM, Kim D, et al. 2013)<br><br>
 
       </h4>
 
       </h4>
             <p>As a natural signal peptide that is widely present in yeast, α-factor has strong and potent secretory properties. Studies have shown that its secretion is almost 100%, which can prevent the secretion of exogenous tubulin from interrupting the yeast's inherent Microtubule system.
+
             <p>As a natural signal peptide that is widely present in yeast, α-factor has strong and potent secretory properties. Studies have shown that its secretion is almost 100%, which can prevent the secretion of exogenous tubulin from interrupting the yeast's inherent microtubule system.
 
                 <br>
 
                 <br>
 
                 <br>
 
                 <br>
Line 131: Line 131:
 
             </p>
 
             </p>
 
             <img src="https://static.igem.org/mediawiki/2017/e/e5/T--BNU-China--design3.jpg" alt="Sorry, the image is not supported by your browser.">
 
             <img src="https://static.igem.org/mediawiki/2017/e/e5/T--BNU-China--design3.jpg" alt="Sorry, the image is not supported by your browser.">
             <h4>Figure 3 (A) tubulin heterodimers α/β, GTP molecules are shown in red. (B) schematics of one subunit and one protofilament. (C) stiff hollow microtubule consists of 13 protofilaments. (D) a short segment view of microtubule under electron microscope. (E) a view of ring structure constituted by 13 protofilaments under electron microscope.<br>
+
             <h4>Figure 3 (A) tubulin heterodimers α/β. GTP molecules are shown in red. (B) schematics of one subunit and one protofilament. (C) stiff hollow microtubule consists of 13 protofilaments. (D) a short segment view of microtubule under electron microscope. (E) a view of ring structure constituted by 13 protofilaments under electron microscope.<br>
 
       (source: Alberts, et al. Molecular Biology of the Cell 6th, 2014)<br>
 
       (source: Alberts, et al. Molecular Biology of the Cell 6th, 2014)<br>
 
       </h4>
 
       </h4>
             <p>From previous literature research, there have be documented that microtubule can self-assemble in vitro under appropriate conditions. The assembly of microtubule from purified tubulin involves two steps: microtubule nucleation and microtubule elongation.
+
             <p>From previous literature research, we found that microtubules can self-assemble in vitro under appropriate conditions. The assembly of microtubule from purified tubulin consists of two steps: microtubule nucleation and microtubule elongation.
                 <br> Whenever in vivo or in vitro, microtubule dynamics are profoundly influenced by the binding and hydrolysis of nucleotide——GTP. The tubulin heterodimers are known to bind GTP in different stability: α-tubulin binds GTP nonexchangablely, whereas the GTP-binding sites on the β-tubulin is exchangeable. The hydrolysis of GTP is coupled with the assembly of microtubule such that variation in the size of the “cap” of GTP-bound subunits on a given microtubule determines whether it will continue to grow or undergo transition to a rapidly depolymerizing phase. Generally, the change from growth to shrinkage is called a catastrophe, while the change to growth is called a rescue. So due to the particular feature of microtubule dynamics behavior, it needs suitable condition for tubulin dimers to reassemble into microtubules in vitro.
+
                 <br> Whenever in vivo or in vitro, microtubule dynamics is profoundly influenced by the binding and hydrolysis of nucleotide——GTP. The tubulin heterodimers are known to bind GTP in different stability: α-tubulin binds GTP nonexchangablely, whereas the GTP-binding sites on the β-tubulin is exchangeable. The hydrolysis of GTP is coupled with the assembly of microtubule such that variation in the size of the “cap” of GTP-bound subunits on a given microtubule determines whether it will continue to grow or undergo transition to a rapidly depolymerizing phase. Generally, the change from growth to shrinkage is called a catastrophe, while the change to growth is called a rescue. Therefore, due to the unique features of its dynamical behaviors, suitable condition is needed for tubulin dimers to reassemble into microtubules in vitro.
 
                 <br>
 
                 <br>
 
                 <br>
 
                 <br>
Line 149: Line 149:
 
             </p>
 
             </p>
 
             <img src="https://static.igem.org/mediawiki/2017/3/33/T--BNU-China--design4.jpg" alt="Sorry, the image is not supported by your browser.">
 
             <img src="https://static.igem.org/mediawiki/2017/3/33/T--BNU-China--design4.jpg" alt="Sorry, the image is not supported by your browser.">
             <h4>Figure 4 The protein system used to simulate the interaction between microtubule and Taxol. GTP and GDP are shown in cyan and gold, respectively. The M-loop for this monomer is colored yellow and the interacting H1-S2 loop of the adjacent monomer is colored red.<br>
+
             <h4>Figure 4 The protein system used to simulate the interaction between microtubules and Taxol. GTP and GDP are shown in cyan and gold, respectively. The M-loop for this monomer is colored yellow and the interacting H1-S2 loop of the adjacent monomer is colored red.<br>
 
       (Source: Arpita M, et al. Biophysical Journal,2008.)<br><br>
 
       (Source: Arpita M, et al. Biophysical Journal,2008.)<br><br>
 
       </h4>
 
       </h4>

Revision as of 15:40, 26 October 2017

BNU-China ">

Design

Overview

Materials

To achieve our goal, the materials we use should be self-assembling protein subunits that can polymerize into long fibrous proteins. After searching and comparing many materials, we finally chose α-\β-tubulin and flagellin.

Approach

After a thorough discussion of various plans, we finally decided to build two parts: the display module and the secretory module. So here,with the special structure of surface display system, we can display the particular subunit onto the yeast surface as a linkage site and secrete other subunits into the extracellular environment to create a subunit-rich surroundings. With the optimal condition, those subunits could reconstitute into polymers.

Display module

A-agglutinin System
Among various GPI-anchored proteins, α/a-agglutinin is one of the most common proteins that have been utilized for the display of proteins on a yeast cell surface. The native a and α agglutinin receptors are believed to act as adhesion molecules to stabilize cell-cell interactions during mating and to facilitate fusion between the a and α haploid yeast cells. A-agglutinin has a core subunit encoded by AGA1 and a binding subunit encoded by AGA2. Both a-agglutinin and the core subunit of a-agglutinin consist of a secretion-signal region, a functional region, a support region, and a putative GPI anchor-attachment signal. After genetic engineering, foreign proteins can be fused to the C-terminal of the binding subunit of a-agglutinin. As AGA1 protein is secreted from the cell and becomes covalently attached to the β-glucan in the extracellular matrix of the yeast cell wall, aga2 protein fused with a foreign protein on its C-terminus will then bind to aga1p through two disulfides bonds. As a result, the heterologous proteins are covalently linked with the glucan-layer.

It is worth mentioning that AGA1 gene is controlled by GAL10 promotor in the genome of S. cerevisiae EBY100 strain, while AGA2 gene is controlled by the GAL1 promotor on the vector pYD1. (see figure 1)

Sorry, the image is not supported by your browser.

Figure 1
the structure of yeast surface display system
(Source: pYD1 Yeast Display Vector Kit Handbook Version D, 2002)

Secretory module

Alpha-factor
We use α-Factor to facilitate the secretion of our exogenous proteins. (see Figure 2)
α-Factor is a 13-residue peptide, secreted by cells of α mating type, that acts on cells of the opposite mating type to promote efficient conjugation between the two cell types, which leads to the formation of aα diploid cells. α-factor is synthesized as a precursor of 165 amino acids containing an 83-residue leader and four α-factor coding regions, each preceded by a short spacer peptide.

Sorry, the image is not supported by your browser.

Figure 2 Predicted structure of the α-mating factor pre-pro secretion signal.
The first helix is part of the pre-region, whereas the following two helixes are part of the pro-region.
(Lin-Cereghino GP, Stark CM, Kim D, et al. 2013)

As a natural signal peptide that is widely present in yeast, α-factor has strong and potent secretory properties. Studies have shown that its secretion is almost 100%, which can prevent the secretion of exogenous tubulin from interrupting the yeast's inherent microtubule system.

Armed with Microtubules

Overview

What is microtubule?
Microtubules are fibrous elements in the cytoplasm of eukaryotic cells, where they play comparably diverse and important roles. The microtubule building block is the tubulin αβ heterodimer. A typical microtubule is a hollow water-filled tube with an outer diameter of 25 nm and an inner diameter of 15 nm. Alpha-beta heterodimers associate head-to-tail to form protofilaments running lengthwise along the microtubule wall with the beta-tubulin subunit facing the microtubule plus end conferring a structural polarity. Microtubules usually have 13 protofilaments but different protofilament numbers can be found in some organisms and specialized cells. (see Figure 3)

Sorry, the image is not supported by your browser.

Figure 3 (A) tubulin heterodimers α/β. GTP molecules are shown in red. (B) schematics of one subunit and one protofilament. (C) stiff hollow microtubule consists of 13 protofilaments. (D) a short segment view of microtubule under electron microscope. (E) a view of ring structure constituted by 13 protofilaments under electron microscope.
(source: Alberts, et al. Molecular Biology of the Cell 6th, 2014)

From previous literature research, we found that microtubules can self-assemble in vitro under appropriate conditions. The assembly of microtubule from purified tubulin consists of two steps: microtubule nucleation and microtubule elongation.
Whenever in vivo or in vitro, microtubule dynamics is profoundly influenced by the binding and hydrolysis of nucleotide——GTP. The tubulin heterodimers are known to bind GTP in different stability: α-tubulin binds GTP nonexchangablely, whereas the GTP-binding sites on the β-tubulin is exchangeable. The hydrolysis of GTP is coupled with the assembly of microtubule such that variation in the size of the “cap” of GTP-bound subunits on a given microtubule determines whether it will continue to grow or undergo transition to a rapidly depolymerizing phase. Generally, the change from growth to shrinkage is called a catastrophe, while the change to growth is called a rescue. Therefore, due to the unique features of its dynamical behaviors, suitable condition is needed for tubulin dimers to reassemble into microtubules in vitro.

Why microtubule?
Microtubules, a component of the cytoskeleton, are widely found in eukaryotic cells. They are very important in a number of cellular processes, such as maintaining cell morphology, intracellular transport and cell division. So it has been a hot spot for research. Displaying microtubules on yeast surface will greatly promote the study of microtubules.

Moreover,Microtubules can act as substrates for motor proteins. Maybe we can use microtubule molecular motors to create a micro-factory based on the extracellular microtubule network we built.

Additionally,due to the important role microtubule plays in mitosis, it is also a major target in cancer treatment. As microtubule-stabilizing agents become more and more important in cancer chemotherapy, it’s really necessary to find more antitumor agents such as Taxol, or other agents that can also stabilize microtubules. Displaying microtubules on the yeast surface, we can easily observe the interaction between small molecules and microtubules, which is very helpful for cancer treatment.

Sorry, the image is not supported by your browser.

Figure 4 The protein system used to simulate the interaction between microtubules and Taxol. GTP and GDP are shown in cyan and gold, respectively. The M-loop for this monomer is colored yellow and the interacting H1-S2 loop of the adjacent monomer is colored red.
(Source: Arpita M, et al. Biophysical Journal,2008.)

What do we plan to do using microtubule?
Thanks to the comprehensive human practice work, we got an essential information: considering the poor stability of microtubule, and the strict polymerization condition of microtubule, we’d better not use microtubule in large-scale industrial application, but rather use it in the relatively mild laboratory environment.
Thus, we regard microtubule as an excellent tool on high-throughput screening of microtubule-stabilizing agents. Furthermore, we attempt to construct a screening platform on our microtubule display technique.

Display module-parts design

Here we choose the vector pYD1 to fulfill the display function. As shown on the figure 5, pYD1 vector contains AGA2 gene, which has described above, codes AGA2 protein. And our target protein is fused on the C-terminus of AGA2p, which is shown as multiple cloning sites in figure 5.
So after inducing by galactose, our target gene expression can be started by GAL1 promotor. Additionally, there are also several tags on the plasmid such as V5 tag and His-tag, which will be used in further analysis.
In this display module, we designed two basic parts: pYD1-α-tubulin (BBa_K2220019) and pYD1-β-tubulin (BBa_K2220020), which means to insert α-tubulin or β-tubulin gene sequences respectively.

Sorry, the image is not supported by your browser. Sorry, the image is not supported by your browser.

Figure 5 (A) map of pYD1. (Source: pYD1 Yeast Display Vector Kit Handbook Version D, 2002)
(B) maps of pYD1-α-tubulin and pYD1-β-tubulin

Secretory module-parts design

In the secretory module, we choose GAL1-controlled expression vector, which contains an alpha-factor signal peptide to facilitate the secretion of our exogenous protein. (see Figure 6)

Sorry, the image is not supported by your browser.

Figure 6 map of pYES2/CT/α-Factor

And then, we insert varied target gene sequences respectively into the multiple cloning site shown as a square box below. (see Figure 7)
Consequently, there will be four types of recombinant proteins. They are alpha-tubulin(pYCα-α tubulin: BBa_K2220022), β-tubulin (pYCα-β tubulin: BBa_K2220023), mcherry fused with α-tubulin(pYCα-mCherry-α tubulin: BBa_K2220024) and β-tubulin fused with mGFP(pYCα-β-tubulin-mGFP: BBa_K2220025). (see Figure 7) We also design a vector which contains alpha-factor fused with mCherry as our positive control in protein expression analysis.This positive control part is pYCα- mCherry. (BBa_K2220021)

Sorry, the image is not supported by your browser.

Figure 7 schematic of secretory module bio-bricks.

Polymerization

Sorry, the image is not supported by your browser.

Figure 8 the schematics of microtubule polymerization on yeast cell surface.

Mixing the yeast of module 1 and the production of module 2 in one system, we can then accomplish the self-assembly of microtubules on the yeast cell wall in suitable condition. Once the assembly is stabled by Taxol, the fluorescent intensity of the sample can be different. So we can wash the remain free tubulin dimers and define the pesticide effect by the fluorescent intensity difference.

Armed with Flagellar Filaments

Overview

What is flagellar filament?
As we all know, the flagella filament is a helical structure composed of subunits of flagellin. And among various flagellin, the FilC has its own unique feature. The N- and C-terminal region of the FliC are important for filament formation, which are the D0 and D1 domain in Figure 8. While the D3 domain which is a central region of the flic playing no role in filament formation. Additionally, when FliC proteins are in the polymeric state, the D3 domain can be exposed on to the surface. So from above, we can replace the central region of flagellin by other proteins without destroying self-assembling ability and if we fuse the enzyme and FliC, we can obtain a filamentous material with high surface density of catalytic sites.

Sorry, the image is not supported by your browser.

Figure 9 Construction of the FliC fusion protein. (A) Arrangement of flagellin subunits within the flagellar filament. D3 domain is exposed on to the surface. (B) The Cα backbone trace of flagellin C protein and eGFP. eGFP replaces D3 domain in the recombinant protein. eGFP can also be replaced by other enzymes. The N- and C- terminal of the flagellin C protein are D0 and D1 domain, which play an essential role in flagellin polymerization.

Why flagellar filament?
Flagellar filament is a quite stable material which only depolymerizes in extreme condition, such as in a pH 2.0 solution or in extreme high temperature. Additionally, the polymerization of flagellar filament is operable in vitro, we can simply add different concentration of precipitant to control the nucleation and elongation process of flagellin monomers. So far, the successfully expression of flic-enzyme fusion protein has been well documented, so we can make further efforts to explore the possibility of yeast surface display system by using flagellar filament.

What we plan to do flagellar filament?
Due to the stabilization of flagellar filaments, our MonKeYeast armed with flagellar filament is qualified to play a role in industry.

We believe that its greatest value lies in the whole-cell multiple Biocatalysts. So we try to build extracellular metabolic pathways, coordinated with intracellular metabolic pathways, to reduce the burden of bacteria. The successful construction of this system will lead a new era of fermentation engineering field.

To fulfill our ambitions, we choose these following five enzymes: xylanase A, PETase (This enzyme has been mutated and displayed by TJUSLS-2016), endo-1,4-β-D-glucanohydrolase (EG), exo-1,4-β-D-glucannase (CBH), β-1,4- glucosidase (BG).


Display module-parts design

Same as the microtubule section, here we choose the vector pYD1 to fulfill the display function. As shown on the figure 5, pYD1 vector contains AGA2 gene, which has described above, codes AGA2 protein. And our target protein is fused on the C-terminus of AGA2p, which is shown as multiple cloning sites in figure 5.
So after inducing by galactose, our target gene expression can be started by GAL1 promotor. Additionally, there are also several tags on the plasmid such as V5 tag and His-tag, which will be used in further analysis.
Here we also divided parts design into two parts: display the building block——FliC, and display several monomer enzyme respectively to test and compare the catalytic activity of the monomeric display enzyme and the polymeric display enzyme. There is a small different between these two parts. If peptide is fused on the N-terminus or C-terminus of flagellin, the polymerization will be significantly affected. So we cut down the AGA2 gene from the vector pYD1, and insert it into FliC gene to replace the central region. And research shows that the his-tag should be fused on the C-terminus of the target protein for not affecting the polymerization.
Therefore, we design the following parts: pYD1-FliC(BBa_K2220002), pYD1-XynA(BBa_K2220004), pYD1-PETase (BBa_K2220005), pYD1-BG (BBa_K2220007), pYD1-EG (BBa_K2220006), pYD1-CBH (BBa_K2220008), which means to fuse the target gene sequences with AGA2 gene respectively. The maps of the parts are presented below. (See Figure 10 & Figure 11)

Sorry, the image is not supported by your browser.

Figure 10 Schematic of FliC-GFP display bio-brick

Sorry, the image is not supported by your browser.

Figure 11 Schematic of parts in monomeric display module

Secretory module-parts design

In the secretory module, we choose GAL1-controlled expression vector, which contains an alpha-factor signal peptide to facilitate the secretion of our exogenous protein. (see Figure 6) Considering of the structure of the yeast surface display module mentioned before, we redesign the gene and tag location on the vector pYES2/CT/α-Factor to ensure the further reassemble of recombinant FilC and enzyme fusion proteins.
Here we change the location of AGA2, His-tag, which are inserted into the central region of FilC. In this way, the structure of recombinant Enzyme-FliC fusion proteins fit the flagellin polymerization process.
We design the following parts: pYCα-FliC-XynA(BBa_K22200011), pYCα-FliC-PETase (BBa_K2220012), pYCα-FliC-BG (BBa_K2220014), pYCα-FliC-EG (BBa_K2220013), pYCα-FliC-CBH (BBa_K2220015)

Sorry, the image is not supported by your browser.

Figure 12 schematics of secretory module bio-bricks.

Polymerization

The monomeric flagellin can nucleate in high concentration of sulfate solution. And it can elongate in the elongation solution, after these two steps, we can obtain flagellar filaments in different length.

Sorry, the image is not supported by your browser.

Figure 13 the schematics of flagellar filaments polymerization on yeast cell surface


[1] Liu, Z., et al. "Recent advances in yeast cell-surface display technologies for waste biorefineries." Bioresource Technology 215(2016):324.

[2] Shibasaki, S, H. Maeda, and M. Ueda. "Molecular display technology using yeast--arming technology. " Analytical Sciences the International Journal of the Japan Society for Analytical Chemistry 25.1(2009):41.

[3] Mitra A, Sept D. Taxol allosterically alters the dynamics of the tubulin dimer and increases the flexibility of microtubules[J]. Biophysical Journal, 2008, 95(7):3252.

[4] Alberts, Bruce, and Alexander Johnson. “MICROTUBULES.” Molecular Biology of the Cell, Garland Science, 2015, pp. 925–929.

[5] Linse, K, and E. M. Mandelkow. "The GTP-binding peptide of beta-tubulin. Localization by direct photoaffinity labeling and comparison with nucleotide-binding proteins. " Journal of Biological Chemistry 263.29(1988):15205-10.

[6] Tian, G., et al. "Tubulin folding cofactors as GTPase-activating proteins. GTP hydrolysis and the assembly of the alpha/beta-tubulin heterodimer. " Journal of Biological Chemistry 274.34(1999):24054.

[7] pYD1 Yeast Display Vector Kit, 10 December 2002, Invitrogen, Version D

[8] Kuwajima, G. "Construction of a minimum-size functional flagellin of Escherichia coli. " Journal of Bacteriology 170.7(1988):3305-9.

[9] Klein, Á, et al. "Xylan-Degrading Catalytic Flagellar Nanorods." Molecular Biotechnology 57.9(2015):814-819.

[10] Wakabayashi, K, H. Hotani, and S. Asakura. "Polymerization of Salmonella flagellin in the presence of high concentrations of salt." BBA - Protein Structure 175.1(1969):195-203.

[11] Klein, A, et al. "A polymerizable GFP variant." Protein Engineering Design & Selection Peds 25.4(2012):153-7.

Copyright © 2017 BNU-China All rights reserved.

If you like this page, you can contact us: bnu_igem@163.com