Difference between revisions of "Team:Munich/Hardware"

Latest revision as of 09:14, 9 December 2017

Complete overview of all modular hardware parts in our pathogen detection system. Shown are counterclockwise and starting in in the upper left corner: The Quake valve that controls fluid flow, our sample processing device, the paper strip where a reaction mix is stored and the readout reaction takes place and finally our low-cost fluorescence detector "Lightbringer" that performs the readout measurement. Images are clickable and linked to the corresponding wiki subsection.

Hardware

The liberation of diagnostic tests from expensive lab infrastructure requires innovative ways of sample processing and measuring. We therefore developed a set of portable hardware tools with the goal of providing an automated sample-to-answer solution. The heart of our system is ‘Lightbringer’, our fluorescence detector, which is capable of measuring kinetics of biological or chemical reactions on paper. Built from 3D–printed parts and standard electronic components, it can be assembled for less than 15$, while offering a sensitivity competitive to commercial fluorescence readers. Additionally, tackling the challenge of sample pre-processing in field, we developed a portable fluidic system, featuring a temperature control unit for lysis and isothermal PCR. Conceiving a platform independent of lab infrastructure, we demonstrate the feasibility of controlling fluid flow with bike tires and air balloons. All hardware components are designed and documented with the aim of enabling the community to reproduce and extend our set of tools.

@@ Line 76: / Line 76: @@
 #HQ_page .picture1{
   width: 320px;
-  height: 170px;
+  height: 155px;
-  background: url("https://static.igem.org/mediawiki/2017/1/15/Valve_hw_start.jpeg")
+  background: url("https://static.igem.org/mediawiki/2017/4/45/Valve_hw_home.jpeg")
 }
 #HQ_page .picture1:hover{
-  background: url("https://static.igem.org/mediawiki/2017/4/4d/T--Munich--pressure_supply_home.png")
+  background: url("https://static.igem.org/mediawiki/2017/5/53/Pressure_supply_hw_home2.png")
 }
@@ Line 91: / Line 91: @@
 #HQ_page #picture2:hover{
-  background: url("https://static.igem.org/mediawiki/2017/4/4a/Paper_strip_hw_home_cut.png")
+  background: url("https://static.igem.org/mediawiki/2017/2/22/Paper_strip_hw_home3.png")
 }
@@ Line 111: / Line 111: @@
 #HQ_page #picture4:hover{
-  background: url("https://static.igem.org/mediawiki/2017/1/11/T--Munich--detector_home.png")
+  background: url("https://static.igem.org/mediawiki/2017/2/2e/Detector_hw_home.png")
 }
@@ Line 162: / Line 162: @@
 <tr>
 <td colspan=6>
-<p color=#919191 size=6> Complete overview of all modular parts of our patogene detection device. The upper left image shows our Quake valve that controls fluid flow that is powered with an air balloon. The image in the middle left shows our portable PCR machine that can processes samples. The image in the lower left shows our Paperstrip where a reaktion mix is stored and the final readout takes place. The image on the right side shows our low-cost fluorescence detector (Lightbringer) that performs the final readout on the paperstrip. Images are clickable and are linked to their corresponding subsection.   </p>
+<div class="captionPicture">
-</td>
+<p>
+Complete overview of all modular hardware parts in our pathogen detection system. Shown are counterclockwise and starting in in the upper left corner: The Quake valve that controls fluid flow, our sample processing device, the paper strip where a reaction mix is stored and the readout reaction takes place and finally our low-cost fluorescence detector "Lightbringer" that performs the readout measurement. Images are clickable and linked to the corresponding wiki subsection.
+</p>
+</div></td>
 </tr>
@@ Line 174: / Line 178: @@
 		<p class="introduction">
-The liberation of diagnostic tests from expensive lab infrastructure requires innovative ways of sample processing and measuring. We therefore developed a set of portable hardware tools with the goal of providing an automated sample-to-answer solution. The heart of our system is <a class="myLink" href="https://2017.igem.org/Team:Munich/Hardware/Detector">‘Lightbringer’</a>, our fluorescence detector, which is capable of measuring kinetics of biological or chemical reactions on <a class="myLink" href= "https://2017.igem.org/Team:Munich/Hardware/Paperstrip" >paper.</a> Built from 3D–printed parts and standard electronic components, it can be assembled for less than 15$, while offering a sensitivity competitive to commercial fluorescence readers. Additionally, tackling the challenge of sample pre-processing in field, we developed a portable <a class="myLink" href="https://2017.igem.org/Team:Munich/Hardware/SampleProcessing">  fluidic system</a> system featuring a temperature control unit for lysis and isothermal PCR. Conceiving a platform independent of lab infrastructure, we demonstrate the feasibility of <a class="myLink" href="https://2017.igem.org/Team:Munich/Hardware/QuakeValve"> controlling fluid flow</a> with bike tires and air balloons. All hardware components are designed and documented with the aim of enabling the community to reproduce and extend our set of tools.
+The liberation of diagnostic tests from expensive lab infrastructure requires innovative ways of sample processing and measuring. We therefore developed a set of portable hardware tools with the goal of providing an automated sample-to-answer solution. The heart of our system is <a class="myLink" href="https://2017.igem.org/Team:Munich/Hardware/Detector">‘Lightbringer’</a>, our fluorescence detector, which is capable of measuring kinetics of biological or chemical reactions on <a class="myLink" href= "https://2017.igem.org/Team:Munich/Hardware/Paperstrip" >paper.</a> Built from 3D–printed parts and standard electronic components, it can be assembled for less than 15$, while offering a sensitivity competitive to commercial fluorescence readers. Additionally, tackling the challenge of sample pre-processing in field, we developed a portable <a class="myLink" href="https://2017.igem.org/Team:Munich/Hardware/SampleProcessing">  fluidic system</a>, featuring a temperature control unit for lysis and isothermal PCR. Conceiving a platform independent of lab infrastructure, we demonstrate the feasibility of <a class="myLink" href="https://2017.igem.org/Team:Munich/Hardware/QuakeValve"> controlling fluid flow</a> with bike tires and air balloons. All hardware components are designed and documented with the aim of enabling the community to reproduce and extend our set of tools.
                  </p>
+<div class="captionPicture">
+<img width=960 src="https://static.igem.org/mediawiki/2017/2/26/Schema_final_lowres.png">
+<p>
+</p>
+</div>
 </td>