Difference between revisions of "Team:TCFSH Taiwan/Design"

Line 467: Line 467:
 
   <p class="title">How we design our biobrick</p>
 
   <p class="title">How we design our biobrick</p>
 
     <p class="content">First, we tried to find a UV promoter, and we located <font style="color: orange">BBa_I765001</font>. However, it simply didn’t work in our experiment. So after searching on the Internet, we found a project that had been conducted by Rice university. They found that protein UirR (<font style="color:orange">K1725420</font>) and UirS (<font style="color: orange">K1725410</font>) can be used as a photo receptor. The UirS protein is anchored in the bacterial membrane where it “sees” the color illuminating the bacterium. If the illumination is UV, UirS activates itself and releases the protein, UirR. UirR will then be phosphorylated, and become active. Active UirR is mobile, capable of binding a specific promoter called P<sub>CsiR1</sub>, and triggering the expression of the desired gene—RFP (<font style="color: orange">E1010</font>). However, we couldn’t find the promoter sequence of PcsiR1 at first, so we used Plsir (<font style="color: orange">K1725400</font>) instead. But when we eventually found the sequence, it was too late for us. So we designed this biobrick:</p>
 
     <p class="content">First, we tried to find a UV promoter, and we located <font style="color: orange">BBa_I765001</font>. However, it simply didn’t work in our experiment. So after searching on the Internet, we found a project that had been conducted by Rice university. They found that protein UirR (<font style="color:orange">K1725420</font>) and UirS (<font style="color: orange">K1725410</font>) can be used as a photo receptor. The UirS protein is anchored in the bacterial membrane where it “sees” the color illuminating the bacterium. If the illumination is UV, UirS activates itself and releases the protein, UirR. UirR will then be phosphorylated, and become active. Active UirR is mobile, capable of binding a specific promoter called P<sub>CsiR1</sub>, and triggering the expression of the desired gene—RFP (<font style="color: orange">E1010</font>). However, we couldn’t find the promoter sequence of PcsiR1 at first, so we used Plsir (<font style="color: orange">K1725400</font>) instead. But when we eventually found the sequence, it was too late for us. So we designed this biobrick:</p>
−
     <p class="content"><font style="color: lightblue">Pcon RBS UirR RBS(<font style="color: orange">B0034</font>)</font><font style="color: lightblue">UirS RBS Ter Ter</font> (<font style="color: orange">B0015</font>)</p>
+
     <p class="content"><font style="color: lightblue">Pcon RBS(<font style="color: orange">B0034</font>) UirR RBS</font><font style="color: lightblue">UirS RBS Ter Ter</font> (<font style="color: orange">B0015</font>)</p>
 
     <p class="content"><font style="color: lightblue">Plsir RBS RFP Ter Ter</font></p>
 
     <p class="content"><font style="color: lightblue">Plsir RBS RFP Ter Ter</font></p>
 
     <p class="content">Then, we needed to find a way to measure the temperature, which is using the temperature regulated RBS (<font style="color: orange">BBa_K115001</font>). This RBS only allows ribosomes to bind on it at the temperature of 37 degree Celsius or above. Originally, we decided to put GFP after it, and the GFP would be activated if it reaches the target temperature. But we then noticed that GFP would produce green light, and green light would cause the protein UirS to reverse back into an inactive state. So we then chose BFP (<font style="color: orange">K592009</font>) instead, and designed this biobrick:</p>
 
     <p class="content">Then, we needed to find a way to measure the temperature, which is using the temperature regulated RBS (<font style="color: orange">BBa_K115001</font>). This RBS only allows ribosomes to bind on it at the temperature of 37 degree Celsius or above. Originally, we decided to put GFP after it, and the GFP would be activated if it reaches the target temperature. But we then noticed that GFP would produce green light, and green light would cause the protein UirS to reverse back into an inactive state. So we then chose BFP (<font style="color: orange">K592009</font>) instead, and designed this biobrick:</p>

Revision as of 07:05, 31 October 2017

HOME
TEAM
PROJECT
Description
Design
Experiments
Notebook
InterLab
Contribution
Model
Results
Demonstrate
Improve
Attributions
PARTS
Parts
Basic Parts
Composite Parts
Part Collection
SAFETY
HUMAN PRACTICES
Silver HP
Integrated and Gold
Public Engagement
AWARDS
Applied Design
Entrepreneurship
Hardware
Measurement
Model
Plant
Software
JUDGING FORM

What is “Detecoli”?

We intend to invent a STICKER called “Detecoli”—a word we coin by combining “detect” and “E. coli”—which changes color in environments of excess sunlight or inadequate temperatures. It will be attached to the product during manufacture and thus is able to monitor the whole process of transportation. Detecoli alerts consumers to possible deterioration or contamination by changing color, and serves as a guarantee of quality.

How we design our biobrick

First, we tried to find a UV promoter, and we located BBa_I765001. However, it simply didn’t work in our experiment. So after searching on the Internet, we found a project that had been conducted by Rice university. They found that protein UirR (K1725420) and UirS (K1725410) can be used as a photo receptor. The UirS protein is anchored in the bacterial membrane where it “sees” the color illuminating the bacterium. If the illumination is UV, UirS activates itself and releases the protein, UirR. UirR will then be phosphorylated, and become active. Active UirR is mobile, capable of binding a specific promoter called PCsiR1, and triggering the expression of the desired gene—RFP (E1010). However, we couldn’t find the promoter sequence of PcsiR1 at first, so we used Plsir (K1725400) instead. But when we eventually found the sequence, it was too late for us. So we designed this biobrick:

Pcon RBS(B0034) UirR RBSUirS RBS Ter Ter (B0015)

Plsir RBS RFP Ter Ter

Then, we needed to find a way to measure the temperature, which is using the temperature regulated RBS (BBa_K115001). This RBS only allows ribosomes to bind on it at the temperature of 37 degree Celsius or above. Originally, we decided to put GFP after it, and the GFP would be activated if it reaches the target temperature. But we then noticed that GFP would produce green light, and green light would cause the protein UirS to reverse back into an inactive state. So we then chose BFP (K592009) instead, and designed this biobrick:

Pcon RBSTemp BFP Ter Ter

Nevertheless, we were afraid that the length of exposure time to 37 degrees Celsius or above is too short for the bacteria to produce enough amounts of BFP. So we decided to use an irreversible inhibitor, and then we came across the Rhl promoter. When the product of RhlI (K1541017) C4-HSR and protein RhlR (C0171) bind together, Prhl will continuously work without consuming the proteins, and thus will have enough time to produce BFP. Late after, we found that the team iGEM14_ETH_Zurich had improved this gene to prevent the “leakiness”. But unfortunately, it’s again too late for us to change. Eventually, we designed this biobrick:

Pcon RBS RhlI RBS RhlR Ter Ter + Prhl RBS BFP Ter Ter

For fear that our products might be damaged, causing the bacteria inside to die, we designed a mechanism to guarantee that our product will remain effective. We knew that if we put an LVA tag behind the chromoprotein, it will degrade much faster. So our concept is to make the bacteria produce chromoprotein constantly, and it will be colorful when it is working. Nonetheless, when the bacteria aren’t alive anymore, the color will degrade fast and eventually become colorless. In the end, we designed this biobrick:

Pcon RBS cj-Blue-lva Ter Ter (note that cj-Blue looks green)

Also, to avoid the color mixture and the overconsuming of the amino acid, we designed a negative control promoter. We use LacI at the end, since it is the most popular one.

Lastly, since it would be difficult to transform more than three plasmids into the bacteria, we combined two of them with one in the reverse direction (we are afraid that the gene behind will express poorly), and try to make the sequence as short as possible. So the final biobrick is:

Operation Model

We designed a device to detect harmful UV lights and high temperature, and we are able to confirm if it is working. Our design of the device will prevent E. coli from leaking out, and the E. coli in it will be annihilated after use. In the end, it can be freely disposed of without causing any potential health concern.

Mechanism

UV receptor

Rice University found that protein UirR and UirS can be used as a photo receptor. The UirS protein is anchored in the bacterial membrane where it “sees” the color illuminating the bacterium. If the illumination is UV, UirS activates itself and releases the protein, UirR. UirR will then be phosphorylated, and become active. Active UirR is mobile, capable of binding a specific promoter called (PcsiR1), and triggering the expression of the desired gene.

Temperature thermometer

The RBSTemp only allows ribosomes to bind on it at the temperature of 37 degree Celsius or above. The main feature of all RNA thermometers is that they function through conformational shifts in structure. These shifts cause conformational changes to expose the Shine-Dalgarno sequence, which acts as a binding site to allow translation.3 For translation to occur, the ribosome must have the aforementioned SD sequence. The structural differences are caused by the transcription regions, but the SD sequence is common.

Color changing

The chromoprotein cj-blue, and the fluorescent proteins BFP and RFP can perform different colors.

Chromoprotein

The LVA tag, served as a degradation peptide sequence, is one of the most effective of them. If we put LVA tags on our desired gene, we can make them degrade faster.

Target

The principal application for our sticker is to monitor the WHOLE delivery process. That is, from the minute the manufacturing of the product is completed in the factory to the moment the customer receives the product, every moment will be monitored. In fact, the monitoring will continue until the customer finishes using the product. This not only guarantees the quality of the product, but helps to solve the possible legal disputes between the factory and the transport company, since you can add a new sticker in each stage of the delivery process. If the transport company or the customer receives the product with red or blue stickers on it, it indicates that the previous transporting condition is not acceptable. Likewise, the transportation company can also use this kind of stickers as evidence to prove that their employees do treat every cargo properly. This way, we can avoid consumer disputes and the ensuing problems of compensation, and the company will even get more goodwill.

As is shown in the above passage, our goal is to ensure the quality of EVERY product that has our stickers on it and to substantiate the reliability of quality control. Above all, we are able to extend the monitoring process from manufacturing, transportation, and eventually to the customer’s hands, preventing the customer from buying, or using, defective products which are damaged or contaminated due to inappropriate transporting or storing conditions. The most attractive features of this bio-sticker are “long-term monitoring” and “cumulative, layered supervision.” The factors of harmful conditions accumulate, and as soon as they surpass the limits, they activate the color changing process in our stickers. The best part is, the basic material of this bio-sticker is e-coli, and since e-coli replicates itself extremely rapidly, the cost of the sticker will be considerably low. So, either replacing a sticker or adding a new one after each stage of the delivery process should still be cheap enough for the company or the consumer to afford, giving them extra incentive to use the product.