Experiments

E. coli module -- UNDER CONSTRUCTION

V. harveyi as a new synthetic biology chassis

Cloning the engineered receptor

Information transmission: producing diacetyl

RFP cloning in conjugative plasmid

Triparental conjugation

RFP production analysis

Preliminary clonings:

receptor part 1
receptor part 2 + tetR

Assembly cloning:
receptor part 1 + 2 + tetR

als cloning

Culture for diacetyl production and NMR analysis

P. pastoris module -- UNDER CONSTRUCTION

Ligation, transformation of Vh_quorum

One colony has grown O/N on the Petri dish. This colony was picked in liquid LB media culture with Cm.

Possible explanations for the low amount of colonies:

pippeting imprecisions
Strong concentration of Cm
Competent cells: 106 only

Another ligation was carried out today, using more DNA and another Cm concentration. The ligation was processed as follows: Ligation protocol

A ratio 1:10 of plasmid/insert was chosen:

Ligase buffer 2x	2µL
Vector	1.2µL
Insert	5µL
Ligase	1µL
Purified water	10.8µL

Competent cells transformation was processed following the transformation protocol.

NB: because of the lack of a right 42°C water bath, the heatshock step was made at 37°C for 40 sec.

2 different plates were made: one at [Cm] = 25 g/L and the other at [Cm] = 12.5 g/L

6 Clones, 2 from CM25 (25-1 and 25-2) and 4 from Cm 12.5 (12-1, 12-2, 12-3 and 12-4 ) that appear on Cm25 and Cm12.5 were grow on plate and on liquid media (5mL) LB + Cm 25 in order to miniprep them with the Miniprep protocol

Digestions were made on the plasmids obtained with the digestion protocol.

We identified a insert on our native pSB1C3, of around 600 bp, matching with the previous gels that we had. Also, 3 clone are ok: Clone1, 25-1 and 25-2. All of them have the wanted digestion: 2000 bp + 1300 bp. We will further investigate using PvuII, cutting twice, once on the insert, once on the vector.

In order to confirm the insert, two more digestion were made, with PvuII (which cut once on pSB1C3, and not on the insert) and SacI (which cut once on the insert, and once on pSB1C3) following the digestion protocol

The 3 plasmids were cut three time, as it was expected for the one containing CqsA sequence. Those 3 clone are validated, and have been stored on glycerol 25%. Their name will become: CqsA Anna (25-1), CqsA Maxant (C1) and CqsA Teo (25-2 )

Cloning of Vc_CqsA

The gel extraction from the 08/10 was digested using EcoRI and SpeI with the digestion protocol. The quantities for QSP 100 were:

2.5µL of EcoRI
2.5µL of SpeI
30µL of DNA template
10µL of Cutsmart
55µL of water mQ

No heat inactivation were made. Instead, a PCR puriffication was processed using Sigma GenEtut^TM PCR Clean Up kit. Afterward, a DNA quantification gel were made containing:

2µL of ladder 1kb
1µL of loading dye + 5µL of digested DNA
1µL of loading dye + 5µL of digested pSB1C3

First, it is clear that the gel extraction worked fine. Second, it seems that the insert is twice the concentration of the digested plasmid.

Consequently, the ligation was carried out and lasted 50min. The followig quantities were used :

2µL of ligase buffer
1µL of ligase
10.8µL of water mQ
1.4µL of pSB1C3 digested E/S
4.8µL of insert

Finally, Top 10 cells were transformed using the transformation (RbCl-method) protocol. Three aliquots were used:

100µL of competent celles + 10µL of DNA: plate A
100µL of competent cells + 5 µLof TE buffer + 5µL of DNA: plate B
100µL of competent cells + 9µL of TE buffer + 1µL of pSB1C3 non digested (positive control): plate C

After O/N incubation, the followging observation were made on the Petri dishes:

Plate A: 12 transformants
Plate B: 19 transformants
Plate C: cell mat (even with a dilution x10)

Hence, eight transformants from each plate were put on liquid LB-Cm medium for subsequent mini prep. They were named A 1 to 8 and B 1 to 8. The transformants named were minipreped. The resulting DNA solutions were stored at -20°C.

After a quick analysis gel of all the miniprep, without any digestion (data not shown), 6 transformants seems to have the right plasmid lenght: A3, A4, A5, B3, B5, B6. Thus, these transformants were digested with PvuII and E/P to assess the right insertion of Vc CqsA.
Premix for PvuII (for 8 digestions):

2 µL of pSB1C3 E/S + 8 µL of PvuII premix
2 µL of A3 miniprep + 8 µL of PvuII premix
2 µL of A4 miniprep + 8 µL of PvuII premix
2 µL of A5 miniprep + 8 µL of PvuII premix
2 µL of B3 miniprep + 8 µL of PvuII premix
2 µL of B5 miniprep + 8 µL of PvuII premix
2 µL of B6 miniprep + 8 µL of PvuII premix

Each tube was put in a water bath at 37°C for 1h. The resulting digestion were put on a 1% agarose gel as follows:

All of the transformants have the same profil and have both of the expected bands. Finally, the 6 transformants are 6 right clones Vc CqsA.

Clones A4 and A5 were named Vc CqsA 1 and Vc CqsA 2 and put in liquid culture to be stored at -80°C the next day.

Solid Bioluminescence assay

Four E. coli precultures were made in LB-Cm (5 mL):

Vh CqsA Max MG1655
Vh CqsA Anna MG1655
Vh CqsA Teo MG1655
pSB1C3 empty MG1655

Each tubes were complemented with 208 µL of a sterile glucose solution to reach a final concentration of 10 g/L. The tubes were put at 37°C O/N. In addition, two V. harveyi precultures were made:

LB: Vh WT (5 mL)
LB: JMH626 (10 mL)

They were put at 30°C O/N. OD of the O/N precultures were taken at 8.06 am. Therefore, fresh LB-Cm-Glc flasks of 10 mL were inoculated to reach OD = 0.1. (final glucose concentration in the medium: 10 g/L). Time of inoculation: 8.32 am. As OD = 0.3 had already been passed at 10.40 am, IPTG induction was made immediatly (final concentration : 0.5 mM). At 1 pm, the cultures were at the end of their exponential phase. Thus, the supernatants could be retrieved following the next steps:

pipeting of 10 mL of each of the cultures in (x5) eppendorf tube of 2 mL
centrifugation max speed, 5 min
pooling of each resulting supernatants
filtration through a 0.2 µm filter
storage at -20°C

OD of the V. harveyi O/N precultures were checked again at 11.10 am: JMH626: 4.15, Vh WT:3.11

(x5) LB flasks of 10 mL were inoculated with JMH626 to reach OD = 0.1. In addition, (x1) LB flask of 10 mL was inoculated with Vh WT, also at OD = 0.1. Time of inoculation: 11.28 am. When the OD was around 0.7, each of the 10 mL cultures were centrifugated at 4500 rpm for 6 min. The resulting supernatants were discarded while the pellets were resuspended with 5 mL of fresh LB medium and 5 mL of SN (one flask = one SN). Then, the cultures were put at 30°C. The whole process of resuspension was over at 3.30 pm.

In addition, 80 µL of the resuspended JMH cultures were dropped-off on a Petri dish and put at 30°C O/N. Acting as a landmark of bioluminescence, 80 µL of a Vh WT culture were also put on the Petri dish. For liquid cultures, the positive control showed bright bioluminescence as expected. Meawhile, all the cultures with the clones SN stayed dark. Regular checkings didn't bring more information. The Petri dish incubated O/N at 30°C was observed.

Test plan of the Petri dish (The Vh WT drop is the bioluminescence landmark)

Additional experiments need to be performed to conclud on these bioluminescence essays. Particularly, bioluminescence of JMH626 without any supplementation has to be tested.

Digestion, ligation and transformation of Vh1-pBR322

**Analytical gel:** digestion control (07/17)

06/20: pBR322 (amplified the 06/19) was digested with EcoRI-HF and PstI-HF. Gel migration and gel extraction were performed to keep the vector.
07/17: Vh1 part (PCR from IDT part) was digested with EcoRI-HF and PstI-HF, and purified with PCR purif kit.

07/20: Ligation with T4 DNA Ligase and associated buffer from New England Biolabs was performed with pBR322 and Vh1 both digested with EcoRI-HF and PstI-HF, and the ligation mix was transformed into E. coli Stellar competent cells.
07/21: 6 transformants were observed.
07/24: The 6 transformants were grown on liquid culture for plasmid extraction.
07/25:Plasmids were extracted with miniprep kit. Analytical digestion was performed with EcoRI/PstI and PvuII/XhoI. Three transformants had the expected digestion profile and were stored for Vh1-Vh2-pBR322 cloning.

Digestion, ligation and transformation of Vh2-pBR322

**Analytical gel** before ligation (07/18)

06/20: pBR322 (amplified the 06/19) was digested with EcoRI-HF and PstI-HF. Gel migration and gel extraction were performed to keep the vector.
17/07: Vh2 part (PCR from IDT part) was digested with EcoRI-HF and PstI-HF, and purified with PCR purif kit.
18/07: Ligation with T4 DNA Ligase and associated buffer from New England Biolabs was performed with pBR322 and Vh1 both digested with EcoRI-HF and PstI-HF, and the ligation mix was transformed into E. coli Stellar competent cells.
07/26: Observed transformants were grown on liquid culture.
07/26: Plasmids were extracted with miniprep kit. Analytical digestion was performed with EcoRI/PstI and PvuII/XhoI. All the transformants had the expected digestion profile and were stored for Vh1-Vh2-pBR322 cloning.

Digestion, ligation and transformation of Vh3-pSB1C3

**Analytical gel** before ligation (07/12)

08/12: Vh3 part (PCR from IDT), previously digested EcoRI-HF and PstI-HF, was digested with EcoRI-HF and SpeI-HF and purified with PCR purif kit. pSB1C3-Ter (BBa_1006) was digested with EcoRI-HF and SpeI-HF and gel extracted. Ligation with T4 DNA Ligase and associated buffer from New England Biolabs and transformation were performed. E. coli Top10 competent cells previously prepared were used.
08/14: Eight transformants were observed on the transformation plates and six of them were grown on liquid culture.
08/15: Plasmid extraction with miniprep kit and analytical digestion of the 6 transformants with EcoRI/PstI and ApaI/NcoI. The two transformants with the expected digestion profile were stored for cloning into conjugative plasmid and for diacetyl production in E. coli.

Digestion, ligation and transformation of Vh1-Vh2-pBR322

08/07: Vh1-pBR322 and Vh2-pBR322 were digested with EcoRI-HF/XhoI (EX) to try the ligation Vh1 part into Vh2-pBR322. Gel migration and gel extraction were performed with these digestion mix.
08/17: Ligations was performed: Vh1 EX (insert) with Vh2-pBR322 EX (vector). T4 DNA Ligase and associated buffer from New England Biolabs were used. E. coli Top10 competent cells previously prepared were used for transformation of ligation mix.
08/18: Transformants were observed on the transformation plate. They were grown on liquid culture for plasmid extraction and analytical digestion.
08/19: Plasmid extraction was performed with miniprep kit for all the transformants. The plasmids were then digested with EcoRI-HF/PstI-HF and BamHI/XhoI. All the transformants had the expected profile. They were stored for a Vh1-Vh2-Vh3 cloning.

Digestion, ligation and transformation of RFP-pBBR1MCS-4 and RFP-pBBR1MCS-5

**Analytical gel** before ligation (13/09)
pBBR1MCS-4 (1) and pBBR1MCS-5 (1) were used for ligation

08/15: Plasmid extraction was performed using miniprep kit. Preparative digestion of the conjugative plasmids pBBR1MCS-4 and pBBR1MCS-5 with EcoRI-HF and SpeI-HF (ES) from New England Biolabs was performed.
09/14: Ligation with T4 DNA ligase and associated buffer from New England Biolabs was performed with pBBR1MCS-4 ES and pBBR1MCS-5 ES (vector) with RFP ES (BBa_J04450, insert). The RFP was initially digested by the Pichia pastoris module for its own constructions. The ligation mix was transformed into E. coli Top10 competent cells previously prepared.
09/19: Red transformants were observed on the transformation plates for ligation RFP + pBBR1MCS-4 and RFP + pBBR1MCS-5. They were grown on liquid culture, and the two strains (one for pBBR1MCS-4 and one for pBBR1MCS-5) which seem to have the higher RFP activity were used for conjugation.

Conjugation of RFP-pBBR1MCS-4 and RFP-pBBR1MCS-5 in Vibrio harveyi JMH626

09/21: E. coli pBBR1MCS-4 Amp^R, E. coli pBBR1MCS-5 Gm^R, V. harveyi JMH626 Cm^R Kan^R and E. coli pRK2073 Spc^R helper were grown overnight on 5 mL liquid culture with appropriate antibiotics. E. coli were grown at 37°C and V. harveyi at 30°C.
09/22: Centrifugation and resuspension in LB was performed for each liquid culture. The following conjugation mix were prepared:
- Conjugation Amp^R: E. coli pBBR1MCS-4 - RFP + V. harveyi JMH626 + E. coli pRK2073
- Conjugation Gm^R: E. coli pBBR1MCS-5 - RFP + V. harveyi JMH626 + E. coli pRK2073
- Negative control Amp^R: E. coli pBBR1MCS-4 - RFP + E. coli pRK2073
- Negative control Gm^R: E. coli pBBR1MCS-4 - RFP + E. coli pRK2073
Each mix was deposed on a membrane upon a LB plate. The plates were incubated overnight at 30°C.
09/23: The membranes were resuspended into water and the suspensions were spread on a new LB plate with double antibiotic selection: Amp and Cmp for “Conjugation Amp^R” and “Negative control Amp^R”, Gm and Cmp for “Conjugation Gm^R” and “Negative control Gm^R”. The plates were incubated overnight at 30°C.
09/24: An uncountable quantity of colonies was observed on the two conjugation plates. No colonies were observed on the negative controls, which proves that conjugation worked. The cells were not red yet, and the contact inhibition on the plate (because of the too high quantity of colonies) may alter it aspects. Thus, the conjugation cells were replated on another plate with the same double antibiotic selection.
09/25: The replated Vibrio harveyi cells showed a red fluorescent activity compared to a plate with V. harveyi JMH626 without conjugation.

**Plates obtained from conjugation**
**Left**: negative control / center: conjugation / **right**: replated conjugation colonies
**Above**: with pBBR1MCS-4 / **Below**: with pBBR1MCS-5

09/26: V. harveyi JMH626 with pBBR1MCS-4, V. harveyi JMH626 with pBBR1MCS-5, V. harveyi JMH626 without plasmid (control) were grown on liquid culture overnight with antibiotics and LB at 30°C.

PCR of the plasmid pPICZαA

PCRs were processed on the pPICZαA coming from miniprep (cf section 1): PCR protocol

The aim of this PCR was to obtain a linear plasmid with 2 specific restriction sites at its extremity (BamHI and KpnI).

Once the PCR was over a gel migration (at 100 V, during 30 min) was performed: Gel migration protocol

pPICZα was not pure but we decided to do a gel extraction of the band of interest after the digestion. So PCR products went through a PCR purification.

Nanodrop of the PCR product: [pPICZαA] = 260,5 ng/µL

Once we knew the DNA concentration we decided to do the preparative digestion (BamHI-KpnI-HF): Digestion protocol

A gel migration (at 100 V, during 30 min) was performed, in order to separate the DNA fragments: Gel migration protocol

The band of interest at 1800 pb was purified via the Gel extraction protocol.

PCR of the insert Odr10-cOT2

PCRs was processed on the part pGAP-Odr10-pFUS1-cOT2 received from IDT: PCR protocol

Once the PCR was over a gel migration (at 100 V, during 30 min) was performed: Gel migration protocol

Odr10-cOT2 was not pure but we decided to do a gel extraction of the band of interest after the digestion. So PCR products went through a PCR purification.

Nanodrop of the PCR product: [Odr10-cOT2] = 277,3 ng/µL

Once we knew the DNA concentration we decided to do the preparative digestion (BamHI and KpnI-HF): Digestion protocol

A gel migration (at 100 V, during 30 min) was performed, in order to separate the DNA fragments: Gel migration protocol

The band of interest at 2800 pb was purified via the Gel extraction protocol.

Team:INSA-UPS France/test/description