Overview
The lung cancer biosensor was divided into two major parts: receptor integration and pathway. The native membrane localized GPCRs STE2 and STE3 were substituted with the two heterologous GPCRs Olf1258 and Ri7 in two different yeast mating types. These two heterologous GPCRs were fused with GFP to test membrane localization. Finally, the functionality of the GPCRs was tested using the plasmid pGFP, were PFUS1 is coupled to GFP. PFUS1 is a mating gene promoter induced after GPCR induction. For testing the functional pathway, the loxP-PTEF-loxP switch was investigated. Before the PTEF promoter is turned, GFP is expressed. Therefore, the decrease in GFP expression was tracked after the turning of the promoter, indicating that the promoter switch was successful.
Receptors
Integration of Olfr1258 and Ri7
For the biosensor to work, modifications of the two yeast strains, a and α, needed to be performed. One major modification was the substitution of the native GPCRs, STE2 and STE3, with the two heterogenous olfactory receptors, Ri7 and Olfr1258. This was executed using a CRISPR system with Cas9 and gRNA specific to STE2 and STE3, for more information see Project, constructs.
By using colony PCR, the substitution/integration of the GPCRs could be validated, after transformation of sequences for GPCR and CRISPR system. The colony PCRs showed successful results for the incorporation of both of the GPCRs into the genome of the respective yeast strain. Olfr1258 has been incorporated into CENPK_111-61A and Ri7 into CENPK_11-11C.
Membrane localization
To enable visualization of the localization of the receptors in the yeast cells, the yeast was transformed with a plasmid containing the GPCRs fused together with GFP. The green fluorescence could then easily enable detection of the GPCRs. For the yeast strain with Olfr1258, the membrane localization of the GPCR could be verified. In the first figure, it can be seen that Olfr1258 is clearly located in the outer membrane of the cell. In the second figure, it can be seen that these cells fluoresce in the nuclear membrane which is clearly shown when the cells in this image is dividing. This image thereby suggest that the GPCR is localized in all membranes.
![](https://static.igem.org/mediawiki/2017/9/91/T--Chalmers-Gothenburg--Olfr_GFP.png)
For the yeast cells expressing Ri7 fused together with GFP it could be visualized that this GPCR is membrane-localized as well.
![](https://static.igem.org/mediawiki/2017/3/36/T--Chalmers-Gothenburg--Ri7_GFP.png )
Lethality of VOCSs in unmodified strain
A lethality test of the VOCs in unmodified yeast strain was performed to be able to examine what range of concentrations the cells could handle and survive in. This test was crucial for the project since the concentration that could be used in the other test of the VOCs together with the modified strain needed to be in a concentration that was known not to affect the cell growth.
![](https://static.igem.org/mediawiki/2017/9/96/T--Chalmers-Gothenburg--Lethality_graph_butanone.png)
This experiment was designed to expose the cells to different concentrations of respective VOC as well as different amounts of DMSO. The OD was measured after 2, 4 and 5,5 hours.
From the lethality test for butanone it could be seen that this range of concentrations, the butanone itself did not kill the cells. The cells that were exposed to 1 μM (1% DMSO), 10 μM (1% DMSO),1 mM (0.1% DMSO) and 10 mM (1% DMSO) did grow without being affected. However, the cells that were exposed to a higher concentration of DMSO had a clear decreased growth rate.
![](https://static.igem.org/mediawiki/2017/3/3e/T--Chalmers-Gothenburg--Lethality_graph_octanal.png)
n-Octanal showed to have more negative impact on the lethality of the cells. The cells that were exposed to 10 μM (1% DMSO) and 1 μM (1% DMSO) had the highest survival. The cells that were exposed to 100 μM (10% DMSO), 10 mM (1% DMSO) and the DMSO control (10% DMSO) had a clear decreased growth rate. However, the 1 mM (0.1% DMSO) showed a weak growth and it was clearly visualized that these cells were affected.
From these two lethality test, it can be concluded that the concentration of DMSO is crucial for the survival of the cells and the concentration should be below 1%. The concentration range tested for butanone did not affect the cells. However, the concentration range tested for n-octanal had an effect on the cells and the concentration of octanal should be kept between 1 μM and 10 μM for the cells to stay unaffected.
BioLector
The GPCRs’ ability to recognize and bind the VOCs, initiate the MAPK pathway and thus activate the PFUS1 could be evaluated with a BioLector. Yeast with Ri7 and Olfr1258 incorporated was induced with n-octanal and butanone, respectively. A plasmid with GFP, pGFP, under the control of PFUS1 was incorporated and thus, GFP would be expressed as a positive output.
The result for Olfr1258 shows a slightly higher GFP expression when the yeast is induced with butanone. See Figure 5. For Ri7 there is no clear result. The higher GFP expression for Olfr1258 indicates that the receptor is able to sense the butanone and initiate the MAPK pathway which in turn activates the PFUS1 promoter. However, one need to consider the possibility that such differences might occur due to varying growth rates compared to the cells’ autofluorescence and further tests would be needed. If the further tests strengthen the results, it shows that the Olfr1258 works as it should.
![](https://static.igem.org/mediawiki/2017/6/6d/T--Chalmers-Gothenburg--olfr_GFP_graph.png)
Pathway
Cre-Cas9
The Cre-Cas9 construct was successfully assembled together into a plasmid. To make the PFUS1 promoter activate, pheromones are needed since PFUS1 activation is accomplished through the yeast pheromone pathway. Pheromones are produced through the mating mechanism of the yeast. The activation of PFUS1 promoter will lead to expression of Cre-recombinase so the LoxP-sites would switch. The switch-system was designed so that it would be non-reversible and by flipping the promoter PTEF1, expression of the GFP would disappear and instead express Cas9.
The two different mating strains successfully mated which was done using selection and microscopic imaging. Further fluorescence microscopy images and colony-PCR runs were done to verify that the switch worked. The results came back negative. Sequencing of the Cre-Cas9 construct showed mutations in the Cre-recombinase part and might be the reason to why these experiments were unsuccessful.
To truly make sure that the flip worked and that the problem was not due to the deviation in the sequence of PCRE or that the PFUS1 promoter is too weak to induce expression, another test was done by an inducible Cre-recombinase plasmid. The activation of Cre-recombinase in the plasmid is accomplished by the presence of galactose. The cell culture was grown in a Delft medium, containing galactose, and observed under a fluorescence microscope during three days. Three replicates were used and all gave a similar result. Figure 6 shows the fluorescence measurements during these three days for one colony. The GFP expression is clearly decreased with the passage of time.
![](https://static.igem.org/mediawiki/parts/f/fc/Cre-test.png)
A colony-PCR was also performed for this test, in order to confirm that the flip worked at sequence level and to make sure that the decrease in expression comes from the switch and not something else. The gel electrophoresis, Figure 2, shows that the flip appear to have succeeded in one of the replicates tested. The clear band at 1300 bp indicates that the flip worked. The upper run shows a gel electrophoresis with only two primers. Only the cells who succeeded to perform the flip will show a band. The lower run shows a gel electrophoresis with three primers. If the flip did not succeed, a band at 500 bp will appear as opposed to 1300 bp, if the flip worked. Two colony-PCRs were run, due to the the fact that the flip might not have a 100 % efficiency, and since the PCR would favour the shorter construct. In the lower gel, there are two band shown for the second replicate, which indicate that the efficiency was not 100 %. Notable is that the other two replicates showed no bands at all in either test, which means that the PCR did not work for them. There should at least be a band in the lower run regardless of the direction of the promoter.
![](https://static.igem.org/mediawiki/parts/f/fc/Colony-PCR_of_the_flip.png)
Cre-gRNA
No further tests was done on this pathway. Please check out Project, description or check out the reference for more information [1].
Future directions
For future directions of this project, there are some aspects to consider; firstly, to make all parts of the system work and get a complete functional system, from the sensing of the VOCs to the output of ADE2.
Once a functioning system is finalized, several steps are required to allow it to be taken into use. To get the biosensor approved for usage in a screening program, extensive testing of the method is required both on healthy people and lung cancer patients. This to be able to show that the system can distinguish between healthy and sick patients.
References
- [1] DiCarlo J, Chavez A, Dietz S, Esvelt K, Church G. Safeguarding CRISPR-Cas9 gene drives in yeast. Nature Biotechnology [Internet]. 2015 [cited 10 October 2017];33(12):1250-1255. Available from: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4675690/