Team:BNU-China/Demonstrate
Results
Microtubule
Display module
Plasmid construction
We have accomplished the construction of two parts whose functions are described respectively in the previous design page (Microtubule module). They are (BBa_K2220019) and pYD1-β tubulin (BBa_K2220020), both parts have been validated by sequencing. The electrophoresis image of these two parts are shown as below (See Figure 1).
pYD1-β tubuiin was transfected into S. cerevisiae EBY100 by our team and validated its function by protein analysis, including Western blot and immunofluorescence microscopy(See Figure 2 and 3). Meanwhile, pYD1-α tubulin was transfected into S.cerevisiae EBY100 by FAFU-China, as part of collebration works.(Click to see more details)
Figure 1 The electrophoresis image of 6 plasmids.
Protein expression analysis- Western blot
Recombinant S.cerevisiae EBY100 strain harbouring the pYD1-β tubulin plasmid was precultivated to mid-log growth phase and then induced by galactose. After 24h inducing，the supernatent from cell lysate of engineered EBY100-pYD1-β was analysed by Western blot.The image shows the results of a Western blot analysis carried out with an anti-V5 antibody.
Figure 2 The partly results of a Western blot analysis carried out with an anti-V5 antibody.
Function analysis- Immunofluorescence microscopy
Recombinant S. cerevisiae EBY100 strain harbouring the pYD1–β tubulin plasmid was precultivated to mid-log growth phase and then induced for 24 h at 20℃. During the inducing period, cells equaling to 2 OD600 units were collected every two hours from 8 h to 24 h. To detect the displayed protein, immunofluorescence microscopy was performed, with mouse IgG against βI tubulin and donkey anti-mouse IgG conjugated with Cy3 as primary and second antibody respectively. Results showed that optimal detection of β-tubulin occurred at 12 h.
Figure 3 Induced 12h in SG-CAA medium；
A,B recipient strain with empty plasmid;
C bright-field micrograph of S. cerevisiae EBY100 cells harbouring pYD1–β tubulin;
D immunofluorescence micrograph of S. cerevisiae EBY100 cells harbouring pYD1–β tubulin.
Secretory module
Plasmid construction
Four parts have been constructed, which are pYCα-α tubulin (BBa_K2220022), pYCα-β tubulin (BBa_K2220023), pYCα-mCherry-α tubulin (BBa_K2220024), pYCα-β-tubulin-mGFP (BBa_K2220025) and pYCα-mCherry (BBa_K2220021). All parts have been validated by sequencing.(See Figure 1)
Protein expression analysis- Western blot
Figure 4 An obvious color of mCherry produced by our engineered yeast harbouring vector pYCα-mCherry-α .
Recombinant S. cerevisiae INVSc1 strain harboring pYCα-α tubulin, pYCα-β tubulin, pYCα-mCherry and pYCα-mCherry-α tubulin plasmid were precultivated to mid-log growth phase respectively and then induced for 48 h at 30℃. The recombinant proteins were extracted and analysed by Western blot. The image shows the results of a Western blot analysis carried out with an anti-V5 antibody.
Figure 5 Western blot analysis of the supernatent from cell lysate of engineered yeasts mentioned above, carried out with an anti-V5 antibody.
Furthermore, it has been proven that our recombinant proteins can be secreted normally and worked as it expected. Firstly, the secretion function of part pYCα-mCherry have been proven by western blot analysis (See Figure 5). And then we test the dynamic behavior of our recombinant proteins mCherry-α tubulin and β tubulin, described in the following functional analysis.
Figure 6 The results of Western blot analysis carried out with an anti-V5 antibody.
Lane A the purified supernatant of S.cerevisiae INVSc1 harboring pYCα-mCherry culture, induced for 12 hours in SG-Ura.
Lane B the supernatent from cell lysate of S.cerevisiae INVSc1 harboring pYCα-mCherry (without purified), induced for 12 hours in SG-Ura.
Protein expression analysis- Fluorescence microscopy
Recombinant S. cerevisiae INVSc1 strain harbouring the pYCα–mCherry-α tubulin or pYCα–mCherry plasmid was precultivated to mid-log growth phase respectively and then induced for 20 h at 30℃. To detect the protein expression of our engineered yeast, fluorescence microscopy was performed. As image shown below, the expression rate of mCherry is almost up to 100%.
Figure 7 Induced 20h in SG-Ura medium；
A,B recipient strain with empty plasmid;
C bright-field micrograph of S. cerevisiae INVSc1 cells harbouring pYCα–mCherry-α;
D fluorescence micrograph of S. cerevisiae INVSc1 cells harbouring pYCα–mCherry-α;
E bright-field micrograph of S. cerevisiae INVSc1 cells harbouring pYCα–mCherry;
F fluorescence micrograph of S. cerevisiae INVSc1 cells harbouring pYCα–mCherry.
Recombinant S. cerevisiae INVSc1 strain harbouring pYCα–β tubulin-mGFP plasmid was precultivated to mid-log growth phase and then induced for 18 h at 30℃ in SG-Ura medium. The expression of recombinant protein can be obviously observed from fluorescence microscope field.
Figure 8 Induced 18h in SG-Ura medium;
A,B recipient strain with empty plasmid;
C bright-field micrograph of S. cerevisiae INVSc1 cells harbouring pYCα–β tubulin-mGFP;
D fluorescence micrograph of S. cerevisiae INVSc1 cells harbouring pYCα–β tubulin-mGFP.
From the images above, we can conclude that all of our parts can work as it expected, including display or secretion of recombinant proteins. Then, we test the function of our upgraded display system.
Function analysis- OD340 test & Electron microscopy
Tubulin polymerization assay is based on an adaption of the original method of Shelanski et al.(1973) and Lee at al.(1977). Light at wavelength of 340 nm is scattered by microtubules proportionally to the concentration of polymerized microtubule. Purified α and β tubulins secreted by engineered INVSc1 were mixed together and incubated at 37℃ for 1 h, and absorbance readings at 340 nm were conducted every minute. The results are shown in the image below.
Comparing the absorbance curves obtained, it was clear that the secreted tubulins had successfully polymerized into microtubules when GTP is added into the system.
OD340
Figure 9 Absorbance curve of polymerization reaction at 340 nm.
Figure 10
意义-讨论
Flagellar Filament
Display module
Plasmid construction
We have successfully constructed the following 11 parts that have been described in detail in the previous design page. (Flagellar filament module)
In display module, we constructed and validated the following 6 parts. They are pYD1-FliC (BBa_K2220002), pYD1-XynA(BBa_K2220004), pYD1-PETase(BBa_K2220005), pYD1-BG(BBa_K2220007), pYD1-EG(BBa_K2220006), pYD1-CBH(BBa_K2220008), which means to fuse the target gene sequences with AGA2 gene respectively. And we also constructed pYD1-FilC(eGFP) (BBa_K2220003) as our positive control. The length and sequence of each parts have been validated by sequencing. The length validation are presented on the part registry page.
Protein expression analysis-Fluorescence Microscopy
Recombinant S. cerevisiae EBY100 strain harbouring pYD1-FliC(eGFP) plasmid was precultivated to mid-log growth phase and then induced for 24 h at 20℃ in SG-CAA medium. The expression of recombinant protein FliC(eGFP) can be obviously observed from fluorescence microscope field.
Induced for 24h in SG-CAA medium;
A,B recipient strain with empty plasmid;
C bright-field micrograph of S. cerevisiae INVSc1 cells harbouring pYD1–FliC(eGFP);
D fluorescence micrograph of S. cerevisiae INVSc1 cells harbouring pYD1–FliC(eGFP).
Function analysis- Enzyme activity assay
Secretory module
In secretory module,we successfully constructed the following parts: pYCα-FliC-XynA (BBa_K2220011), pYCα-FliC-BG (BBa_K2220014), pYCα-FliC-EG (BBa_K2220013), pYCα-FliC-CBH (BBa_K2220015), and pYCα-FliC-eGFP (BBa_K2220003) as positive control. The lengths and sequences of each part has been validated by sequencing. The length validations are presented on the part registry page.
Protein expression analysis- Western blot
figure 7 The results of a Western blot analysis carried out with an anti-His antibody
Protein expression analysis- Western blot
The image shows the results of a Western blot analysis carried out with an anti-His antibody. The recombinant proteins are expressed by S.cerevisiae INVSC1 pYCα-FilC(PETase) and pYCα-FliC(XynA) respectively. After 24h inducing，the recombinant proteins are extracted and analysed by Western blot
木聚糖
Copyright © 2017 BNU-China All rights reserved.
If you like this page, you can contact us: bnu_igem@163.com
