![CATE logo](https://static.igem.org/mediawiki/2017/d/d6/T--ETH_Zurich--LogoMinimal.png)
Anti-Cancer Toxin Experiments
This is a detailed experiment page dedicated to an individual function. To access other experiments, go to our Experiments page. To get a quick glimpse at all of our achievements, check out Results.
Achievements
- Production of azurin in a controlable manner (via AHL induction).
- Production of an azurin rich bacterial lysate.
- Quantification of azurin in our lysate (corresponding to a 140 µM intracellular concentration of azurin).
- Quantitative assessment of cytotoxic effect of azurin on p53 positive and negative cancer cell lines.
Introduction
Once a tumor environment has been recognized and colonized by our bacteria, the production of an anti-cancer toxin, together with an MRI Contrast Agent agent will be triggered. The module that we engineered to achieve this purpose includes an AND-logic synthetic promoter that recognizes the presence of high lactate and high bacterial density in the tumor environment and allows the expression of the anti-cancer toxin, azurin, and the MRI Contrast Agent, bacterioferritin, from the same operon (Figure 1).
![Accumulation of anti-cancer toxin into cells](https://static.igem.org/mediawiki/2017/9/9a/T--ETH_Zurich--Wet_Lab_Experiments_Anti_Cancer_Toxin_animation_1.gif)
Once the Tumor Sensing has been activated, both the Anti-Cancer Toxin azurin and the MRI Contrast Agent bacterioferritin are produced. Azurin will accumulate inside of the bacteria until it is ready for release. Once the doctor verifies the bacterial colonization of the tumor bacteria via MRI, focused ultrasounds will activate Cell Lysis releasing an effective dosage of azurin to the tumor.
For more details about azurin and its role in our system, go to our description of the Anti-Cancer Toxin.
Overview of the Experiments
In our experiments, we replaced the AND-gate promoter in the genetic circuit depicted in Figure 1 with a well-established inducible promoter, Plux, in order to control the expression of the operon. Moreover, we coupled the expression of azurin with a fluorescence output as we exchanged the bacterioferritin gene with a gene encoding for superfolder GFP. In that way we could indirectly assess the functionality of our operon in a controllable manner (Figure 2). This circuit was transformed in E. coli TOP10 which was used for the production of azurin-rich bacterial lysate. Finally, the application of the bacterial lysate on different cancer-cell lines in vitro helped us to emulate the delivery of the anti-cancer payload via cell-lysis against different solid-tumor types.
![](https://static.igem.org/mediawiki/2017/6/63/T--ETH_Zurich--Wet_Lab_Experiments_Anti_Cancer_Toxin_fig_2_experiment.png)
Several preliminary experiments were conducted before the application of the bacterial lysate to different cancer-cell lines. Initially we examined the production of azurin from our engineered bacteria after induction with AHL, indirectly by detecting the fluorescence of the co-expressed sfGFP. An SDS-PAGE analysis confirmed the presence of azurin in the cytosolic fragment of E. coli after AHL induction. Further culture scale-up to 50 mL volumes allowed us the production of azurin-rich bacterial lysate via sonication. A second SDS-PAGE confirmed cell-lysis by sonication as all the overexressed azurin and sfGFP were detected together with the native proteins of E. coli within the lysate. Thanks to our collaborators from Freiburg, we were able to quantify the azurin content of our bacterial lysate, as they provided us with purified azurin, which we used to create a standard curve of purified azurin concentration on the same SDS-PAGE gel.
With our bacterial lysate at hand we had to define the following parameters regarding the experimental set-up of mamalian cell incubation with our lysate:
- Which cancer cell-lines should we use?
- Which is the optimal number of cells to seed in our experiments?
- How can we assess the viability of the mammalian cells?
- How much of azurin-free bacterial lysate can our cells tolerate?
After defining the experimental parameters we tested the cytotoxic potential of our azurin-rich bacterial lysate against different cancer cell lines. Simultaneously, our Freiburg collaborators provided us with a killing curve of purified azurin against HEK-239 cells, enabling the comparison between the efficacy of purified azurin and azurin - rich bacterial lysate.
To read more about each of these experiments, click on the buttons below. For a detailed protocol describing each experiment, visit Protocols.
Phase I - Killing assay development
Co-Expression of Azurin and sfGFP by E. coli TOP10
OBJECTIVE
In this experiment we attempted to co-express azurin and sfGFP in the same operon in a controllable manner, emulating the co-expression of azurin and bacterioferitin in our final genetic circuit. The expression of sfGFP was used as an indirect readout of the operon gene expression. Additionally we tried to express a small azurin-derived peptide, namely p28, which is responsible for azurin's cytotoxic effect on cancer cells [1].
PROCEDURE
E. coli TOP10 were transformed with two plasmids, one responsible for constitutive expression of LuxR transcription factor and one containing the azurin and sfGFP gene in the same operon under an AHL inducible promoter regulated by the activating complex of LuxR::AHL. A second transformant strain was created carrying the gene encoding for p28 instead of the complete azurin protein. Biological triplicates of the engineered bacteria were cultured in shaking flasks at small scale (5 mL), and different AHL induction conditions were applied to them once they reached in the exponential phase (OD600nm = 0.4), specifically:
- Induction with 10-4M of AHL
- Mock induction with DMSO
Additionally, bacteria transformed with the same plasmids lacking the Plux_azurin/gfp construct were also cultivated serving as negative control of azurin expression. The cultivation stopped 200 min after induction, a time point where gene expression seemed to have stopped according to separate characterization experiments (see here link to bfr). Samples from each culture were transfered in a 96-well plate and both their absorbanse at 600nm (Abs 600nm) and their sfGFP content was evaluated in a plate reader. In the same plate we also included several concentrations of purified sfGFP allowing us to create a standard curve of sfGFP concentration (Figure 3). This standard curve, eventually allowed us to quantify the expression of sfGFP in the culture samples (Figure 4). A detailed protocol is available in Protocols.
RESULTS
The mean sfGFP concentration per cell was plotted for the biological samples under examination (Figure 2).
![Standard curve of sfGFP concentration](https://static.igem.org/mediawiki/2017/8/85/T--ETH_Zurich--sfgfp_standard_curve.png)
![Assesing the expression of sfGFP from the azu/sfGFP and p28/sfGFP operon](https://static.igem.org/mediawiki/2017/3/3f/T--ETH_Zurich--azurin_p28-induction.png)
The overexression and accumulation of sfGFP only after AHL induction was also verified via:
- Fluorescent images of the cell cultures exposed to blue-light illuminator (Figure 5, top)
- Images of the bacterial pellets from the bacterial cultures (Figure 5, bottom)
![Pictures of AHL induced and non-induced cultures expressing azurin/sfGFP or p28/sfGFP](https://static.igem.org/mediawiki/2017/d/d6/T--ETH_Zurich--Wet_Lab_Experiments_Anti_Cancer_Toxin_fluorescent_normal_pic.png)
CONCLUSION
With this experiment we could indirectly verify the functionality of both the operons expressing azurin and p28 respectively. From this experiments we chose the clone 3 for the creation of azurin-rich and p28-rich bacterial lysates. Samples from these cultures were further analyzed via SDS-PAGE to verify the production of p28 and azurin in a direct way.
Phase II - Test device characterization
SDS-PAGE to Confirm AHL-Induced Expression of azurin and p28
OBJECTIVE
Fluorescence measurements showed indirectly the functionality of the operons expressing azu/sfGFP and p28/sfGFP. To directly confirm that bacterioferritin was indeed co-expressed, an SDS-PAGE analysis was performed.
PROCEDURE
Protein lysates were obtained from bacteria treated with different concentrations of AHL. To determine the samples' protein concentration, needed to prepare the samples for SDS-PAGE, the Bradford protein assay was preformed prior to the SDS-PAGE analysis. A detailed protocol is available in Protocols.
RESULTS
To determine protein concentrations in the lysates via Bradford protein assay, a standard curve was first generated by using a protein standard, bovine serum albumin, and measuring absorbance of different dilutions of the standard. Second, absorbance of the unknown samples was measured and the results were fitted to the curve.
After determining the unknown concentrations, samples were prepared accordingly and subjected to SDS-PAGE analysis. Band sized approximately 14.8 kDa (which corresponds to azurin) were visible in the samples treated with AHL. No bands corresponding to the azurin-derived p28 peptide could be detected, mainly because of its low molecular weight (27 aa, ~4 kDa). There were no bands in untreated samples or the negative control (Figure 7).
![](https://static.igem.org/mediawiki/2017/2/22/T--ETH_Zurich--_gel_azurin_p28_vasilis.png)
CONCLUSION
As expected, a band corresponding to azurin were visible in the sample induced with AHL. With this, to co-expression of azurin and GFP in the test strain for azurin-rich lysate production experiments was confirmed. The production of p28 from our engineered strain couldn't be confirmed and for this reason no further experiments were conducted with this strain.
Determining the Optimal Seeding Cell Concentration for Mammalian Cell Cultures
OBJECTIVE
With this experiment we wanted to define the optimal starting cell population of different cancer cells lines, in order to avoid overgrowth and detachment of the mammalian cells in our experiments.
PROCEDURE
Variable amount of cells were seeded in a 96-well plate and their growth was assessed via microscopy after 24 hour growth in DMEM medium (supplemented with 1% streptomycin, 1% penicillin and 2% FBS).Two different cell - lines were tested, namely HEK-239 and HeLa CCL-2 lc. The use of HeLa CCL-2 lc allowed to monitor the growth of the cells via fluorescence microscopy as these cells are producing constituively citrine. A detailed protocol for this experiment is available in Protocols.
RESULTS
From the microscopy pictures obtained after 24-hours incubation, the optimal cell concentration range was defined between 60'000 and 600'000 cells/mL in a 96-well plate. For higher concetrations the mamallian cell culture seemed to approach confluency.
![Seeding images](https://static.igem.org/mediawiki/parts/0/0f/T--ETH_Zurich--_growth_HEK.png)
![Seeding images hev](https://static.igem.org/mediawiki/parts/5/5a/T--ETH_Zurich--_growth_HELa_lc.png)
CONCLUSION
The optimal seeding cell concentration to avoid overgrowth was set to 100'000 cells/mL (between 60'000 and 600'000 cells/mL). The same value was used also in experiments were 1 mL cultures were incubated in 12-well culture plates.
Assessing Different Cell Viability Assays: Killing Effect of 5-Fluouracil on Different HeLa CCL-2 Cell Lines
OBJECTIVE
With this experiment we wanted to determine the efficiency of two different assays in order to evaluate the viability of mamalian cells. The first assay that we tried was the usage of Calcein AM dye. This compound penetrates the cell membrane and upon interaction with active esterases in the mamalian cell cytosol, a fluorescent product is being generated, leading to the staining of living cells containing active esterases in their cytosol. The second assay was based on the HeLa CCL-2 lc cell line ability to produce constitutively citrine. Upon cell death, cells are detaching from the surface and they are being removed via a washing step. In that way, the total fluorescence of the specific sample should be reduced. In this experiment, cell samples with diverse viability are generated by the application of a concetration gradient of a well-known cytotoxic agaent, namely 5-fluouracil [1]. For both assays the goal is to create a killing curve, where the fluorescent signal of the cell sample is dropping in respect to increasing cytotoxic agent concentration.
PROCEDURE
HeLa CCL-2 cells were seeded in a 96-well plate with initial concentration of 100'000 cells/mL. After 24-hour growth the cells are incubated with a different concentrations of 5-fluouracil. After 24 hours the cells are, incubated with calcein AM solution and the viable fraction of the cells is assessed via fluorescnce microscopy and on a spectrophotometer.
The use of HeLa CCL-2 lc allowed us monitoring the viability of the cells on a spectrophotometer as these cells are producing constitutively citrine. Decrease in cell viability would result in less cells per well due to the detachment of the apoptotic cells from the well. In terms of fluorescence that would result in the decrease citrine related fluorescence. A detailed protocol is available in Protocols.
RESULTS
Fluorescence data were obtained via a spectrophotometer, for both the cell lines and viability assays used. Calcein AM staining assay gave inconclusive results as medium concentrations of tha killing agent didn't result in cell viability decrease (Figure 11, A). On the other hand, the cytotoxic effect of 5-fluouracil could be reliably monitored via the decrease of citrine fluorescence after the removal of detached non-viable cells (Figure 11, B).
![tecan killing measurements](https://static.igem.org/mediawiki/2017/1/15/T--ETH_Zurich--_fluoracil_final_version.png)
CONCLUSION
The spectrophotometer results couldn't conviencingly prove the expected killing effect of 5-fluouracil on the HeLa CCL-2 cell line. On the other hand, the loss of citrine fluorescence from HeLa CCL-2 lc cell samples due to the removal of the dead cell fraction proved to be a good measure of cell viability. For this reason, we decided to use the HeLa CCL-2 lc cell line in further experiments to assess the cytotoxic effect of our azurin-rich bacterial lysates. However, the Calcein AM assay was still used for qualitative viability assessment of other cancer-cell lines that lack the constitutive citrine expression, via fluorescence microscopy.
Assessing the bacterial lysate tolerance of different cancer-cell lines
OBJECTIVE
With this experiment we wanted to assess the tolerance of the HeLa CCL-2 lc cell line upon incubation with different amount of azurin-free bacterial lysate. The information acquired from this expreriment helped us to define the amount of medium that we can substitute by our bacterial lysate without harming the cells neither because of the native E. coli proteins present in the lysate nor because of nutrient depravation. Additionally, a p53 negative cancer cell line, namely HT-29, was also qualitatively assessed for its tolerance towards azurin-free bacterial via calcein AM assay.
PROCEDURE
For the two different cell lines, namely, HeLa CCL-2 lc and HT-29, cells were seeded in 2 different 12-well culture plates with initial concentration of 100'000 cells/mL. After 24-hour growth the cells are incubated with increasing amounts of azurin-free lysate in order to assess the effect of the lysate on the cancer cell growth . Simultaneously, cell samples were also incubated with increasing amount of PBS, instead of lysate, in order to check the effect of nutrient depravation on the cell growth. After 24 hours the cells, apart from the HeLa CCL-2 lc, were incubated with calcein AM solution. The viability of the cells was assessed via fluorescnce microscopy. The samples of HeLa CCL-2 lc cell-line were directly examined for their viability via fluorescence microscopy as these cells are producing constitutively citrine. A detailed protocol is available in Protocols.
RESULTS
From the microscopy pictures obtained, we could verify that the bacterial lysate can substitute up to 20% of the HeLa CCL-2 lc culture volume without affecting the cell growth (Figure 12).
Different cell lines were expected to react differently when exposed to bacterial lysates, and that is the case for the HT-29 cancer-cell line which seems that cannot tolerate the same amount of azurin free bacterial lysate as HeLa CCL-2 lc (Figure 13).
![staining killing images from HT-29](https://static.igem.org/mediawiki/parts/7/72/T--ETH_Zurich--_tolerance_HT-29.png)
CONCLUSION
To minimize the risk of any cytotoxic effect of our bacterial lysate on the HeLa CCL-2 lc, we decided to use 10% (v/v) of the bacterial lysate for the upcoming experiments.
Phase III - Demonstrating azurin's killing ability
Applying Azurin-Rich Lysate to Different Mammalian Cell Lines: Azurin Killing Curve
OBJECTIVE
This was a milestone experiment in our work, as we wanted to assess the cytotoxic potential of azurin-rich bacterial lysates on p53 (+) and p53 (-) cell lines. Literature suggests, that the main mode of action of azurin against tumors is via stabilization od p53 protein [1]. For this reason HeLa CCL-2 lc was a suitable candidate for our experiment as it consists a p53 (+) strain and additionally has been well-examined in our project (good lysate tolerance and reliable cell viability assay). Moreover, the HT-29 p53 (-) negative cell line was also tested using the AM-calcein vaibility assay, in order to examine the effect of azurin against p53 (-) cancer cell - lines.
PROCEDURE
For the two different cell lines (HeLa CCL-2 lc and HT-29), cells were seeded in triplicate samples in a 96-well plates with initial concentration of 100'000 cells/mL. After 24-hour growth the cells are incubated with increasing amounts of azurin-rich lysate in order to assess the effect of the different azurin concentrations on the cancer cell growth. The concentration gradient of azurin-rich lysate was achieved by mixing azurin-free and azurin-rich bacterial lysate in different ratios.
Simultaneously, cell samples were also incubated with 10% of PBS and also with 10% of azurin-free lysate. These negative control samples allowed us to check for any other cytotoxic effect stemming either from nutrient depravaion or native bacterial proteins. Moreover, cell samples were also incubated with 1 mM of 5-fluouracil allowing us to test the functionality of our staining assay. After 24 hours the cells, apart from the HeLa CCL-2 lc, were incubated with calcein AM solution. The viability of the cells was assessed via citrine fluorescence for the HeLa CCL-2 lc cells and calcein fluorescence for the HT-29 cells in a spectrophotometer. A detailed protocol is available in Protocols.
RESULTS
The cytotoxic effect of our azurin-rich lysate was verified by the decrease in the citrine fluorescence, following an increase in the azurin content. From the following graph (Figure 14) even 3.2% of azurin lysate (~2 nM) is enough to detect a cytotoxic effect.
Azurin's cytotoxic effect cannot be detected against HT-29 cells according to the results of the calcein AM viability assay (Figure 15).
![azurin HT29](https://static.igem.org/mediawiki/2017/8/8b/T--ETH_Zurich--_HT29_azurin_tecan_data.png)
CONCLUSION
The cytotoxic effect of azurin on the p53 + HeLa CCL-2 lc cancer cell line was detected. An effective azurin concentration of 1.8 nM could be deduced from this experiment and it was used as an input for the estimation of the killing area our system could achieve.
Determination of azurin absolute effective concentration
OBJECTIVE
Quantification of the azurin content in our bacterial lysate.
PROCEDURE
Freshly prepared bacterial lysate from cultures expressing azurin/gfp after induction with AHL, were analyzed via SDS - PAGE together with a concentration gradient of purified His8-azurin provided by Freiburg iGEM Team. The standard protocol for SDS-PAGE was followed. Quantitative analysis of the SDS-PAGE gel was done with a LI-COR Odyssey CLx scanner.
RESULTS
The result of the SDS-PAGE verified the presence of the co-expressed azurin and sfGFP in the produced lysate (Figure 16). The same gel was used to quantify the amount of azurin via a concentration standard curve of purified azurin (Figure 17). Based on the OD of of the bacterial liquid culture before lysis (OD = 5) we could deduce that our lysate contained 7 mg/L of azurin (it constituted 12% of the total protein content). Considering the molecular weight of azurin (14.8 kDa), this amounts to a concentration of 570 nM in the bacterial lysate.
We also want to know what was the intracellular concentration of azurin to assess the maximimum concentration that we could achieve in our bacteria. For this we used the "rule of thumb" proportionality relationship between the OD and the number of cells (8.108 cells/OD) and the approximate volume of
![](https://static.igem.org/mediawiki/2017/8/89/T--ETH_Zurich--_SDS_good.png)
![](https://static.igem.org/mediawiki/2017/4/4c/T--ETH_Zurich--_SDS_quantitative.png)
With this data at hand, we went back to the experiments where we assessed the cytotoxicity of azurin on the HeLa CCL-2 lc cells. The effective azurin concentration was then determined as 2 nM.
CONCLUSION
We manage to quantify the amount of azurin in our bacerial lysate and thus to defone the cytotoxic azurin concetration (2 nM) against p53 + cancer cells (HeLa CCL-2 lc).
References
- Jiang, Jian-Xin, et al. "Overexpression of microRNA-125b sensitizes human hepatocellular carcinoma cells to 5-fluorouracil through inhibition of glycolysis by targeting hexokinase II." Molecular medicine reports 10.2 (2014): 995-1002. doi: 10.3892/mmr.2014.2271
- Yamada, Tohru, et al. "A peptide fragment of azurin induces a p53-mediated cell cycle arrest in human breast cancer cells." Molecular cancer therapeutics 8.10 (2009): 2947-2958. doi: 10.1158/1535-7163.MCT-09-0444