1. Transcriptional light switch for cell adhesion

Using the blue light inducible promoter PBlind , we aim to use blue light (6hr, 475nm) to induce the transcription of Intimin, a cell surface protein, fused to either SpyTag (13 amino acids) or SpyCatcher (138 amino acids, 15kDa). SpyTag and SpyCatcher are two binding partners that come from CnaB2 (immunoglobulin-llike collagen adhesin domain) of the FbaB protein, found in the invasive strains of S. pyogenes. SpyTag contains a reactive aspartate that forms a strong isopeptide bond with a reactive lysine residue in SpyCatcher when in close proximity.

Once a mixture of cells are light induced to display SpyTag or SpyCatcher on their cell surface, they are expected to aggregate. Similar to lithography, structures would be generated layer by layer from a flat surface by exposing a particular radius with blue light.

Designers note: after analysing multiple cell surface display proteins, we opted for Intimin (EaeA intimin) as it has shown to display passenger proteins of similar size to SpyCatcher and it had not been characterised by iGEM teams before. Other cell candidates considered include: ice nucleation protein, PgsA and OmpC.

Designed Experiments

A) Represents two cell lines expressing either intimin’-SpyTag or intimin’-SpyCatcher fusion proteins. Cells harbouring either construct under the control of a constitutive promoter would have either been mixed together or mixed with WT cells (control) (15min) or not mixed and passed through a particle sizer with a range of aperture sizes (0.4µm - 40µm) to compare aggregate sizes. As secondary experiments and for visual purposes we would have also incubated cells expressing Intimin-SpyTag with purified GFP-SpyCatcher, Intimin’-SpyCatcher with purified GFP-SpyTag and Intimin-GFP-SpyTag with Intimin-SpyCatcher cell lines for 15min and visualize cell-protein binding and cell-cell interaction via fluorescence microscopy. We also included a His-Tag within all SpyCatcher construct variants to enable in-vitro analysis of complexes formed with SpyTag variants.

B) Represents two cell lines expressing either intimin’-SpyTag or intimin’-SpyCatcher fusion proteins pre and post light induction. Aggregation experiments described in A) would have been repeated after replacing the constitutive promoter with PBlind , blue-light inducible promoter and transforming cells with EL222 (blue light inducer) under a constitutive promoter (C). Cell aggregation and fluorescence experiments would have been carried out with cells grown overnight under darkness or under blue-light and in the presence or absence of the EL222 construct.

2. Post-translational light switch for cell adhesion

As a more immediate induction of cell aggregation, we aimed to develop a post-translational light switch in which cells are constitutively expressing either Intimin’ fusion proteins with SpyTag or an inactive version of SpyCatcher. Only upon light exposure, SpyCatcher is able to bind SpyTag resulting in a much faster response than transcriptional induction. This is achieved by incorporating a photocaged unnatural amino acid (UAA), Ne-methyl-L-lysine, in place of the reactive lysine in SpyCatcher required for the covalent bond formation with the SpyTag aspartate residue. Upon exposure to UV light (20min, 365nm), the “cage” group in the unnatural photocaged amino acid is cleaved off revealing the native amino acid and a biologically active protein. This approach also adds a layer of bio-containment as cells will only function when externally supplied with UAA.

To achieve this, we introduced an amber stop codon (TAG) in place of the reactive Lys 31 residue (Lys31X) in SpyCatcher. Amberless E. coli cells also have to express pyrrolysyl tRNA (pyIT/tRNAPylCUA) from M. mazei and pyrrolysyl-tRNA synthetase from M. barkeri and the UAA must be supplemented in the media. The pyrrolysyl-tRNA synthetase catalyses the acylation of the suppressor tRNACUA with the UAA. During translation, the UAG amber codon in the mRNA is recognized by the acylated tRNACUA and the UAA will be added to the growing polypeptide chain. The orthogonality of this system has shown to work in both E. coli and mammalian cells.

Figure 2. Post-translational light induction of cell aggregation. A) Represents two cell lines expressing constitutively either intimin’-SpyTag or the photocaged version of intimin’-SpyCatcher fusion proteins. Cells harbouring either construct would have either been mixed together or mixed with WT cells (control) or not mixed and exposed to UV light (365nm) or not exposed for 25min-1hr and then passed through a particle sizer with a range of aperture sizes (0.4µm - 40µm) to compare aggregate sizes. As secondary experiments and for visual purposes we would have also incubated cells expressing Intimin’-SpyTag with purified photocaged GFP-SpyCatcher, photocaged Intimin’-SpyCatcher with purified GFP-SpyTag and Intimin-GFP-SpyTag with photocaged Intimin-SpyCatcher cell lines pre and post photo-lysis (365nm) for 25min-1hr to visualize cell-protein binding and cell-cell interaction via fluorescence microscopy. We also included a His-Tag within all photocaged SpyCatcher construct variants to enable in-vitro analysis of complexes formed with SpyTag variants.

3. Polymer production/binding

Bacteria has been widely used for the production of biomaterials to generate sustainable and eco friendly bricks, bioplastic products, items of clothing as well as “living materials” by incorporating nanoparticles into biofilms. With Barchitecture we can light-induce cellular 3D structural arrangements while producing, binding or degrading biomaterials such as PHA or silicates.

Proposed design for the production, secretion and binding of PHA granules:

Through a similar mechanism, bacteria, could be light-guided to form precise and intricate structures that can then simultaneously produce and bind biosilica. This approach will enable “growing” electronics just with the guidance of a particular wavelength of light.

Our engineered cells would form the desired 3D structure using blue light. These cells would also express photocaged (inactive) recombinant silicatein on their surface. Another wavelength of light would activate silicatein to begin the production of biosilica from water-soluble biosilica precursors added to the media. Our cells could also present ligands on their surface to attach the produced polymer to their surface.

Our wet lab data

We tested whether the promoter has any significant leakage. Also, we wanted to show that GFP cannot be expressed in the absence of EL222. This is of particular interest as the aim of LIT is to demonstrate the versatility and high precision of light control. As shown in Figure1, only J23151-GFP (positive control) had a significant difference in fluorescence compared to R0040-GFP (negative control) WT cells and the Luria Broth (LB) in both dark and Blue-light conditions. Pblind-GFP had no significantly different fluorescence level compared to the LB baseline, negative control or WT cells in either condition. This is expected, as the EL222 protein is required for blue-light inducible transcriptional activation.

Figure 1. Blue light inducible promoter (Pblind) characterisation. J23151 is a constitutive promoter, R0040 is a TetR repressible promoter (repression inhibited only by the addition of tetracycline), Pblind promoter is a fusion of EL222 (photosensitive transcription factor) binding region and the luxI promoter, where EL222 is only able to dimerize and bind the Pblind promoter upon blue light exposure, where it can then recruit RNAP and drive the transcription of genes downstream. Wild type (WT) 10beta cells were transformed with J23151-GFP (positive control), R0040-GFP (negative control) or Pblind-GFP. All cells were grown overnight at 37°C in darkness or exposed to blue light (465nm) and diluted to OD600=0.6 to record GFP fluorescence. The data represents the mean of 3 biological replicates and 4 technical replicates for each condition. Luria broth (LB) was included as a baseline for the fluorescence. Error bars represent the SD and statistical significance of **** P < 0.0001 was calculated using the Tukey's multiple comparisons test.

Tissue engineering and how

Tissue engineering involves developing sophisticated 3-dimensional scaffolds that mimic the tissue tried to be reproduced in mechanical terms such as elasticity, volume and organization. After the scaffold has been produced cells are seeded into and onto the scaffold and they are allowed to grow into the scaffold. Our project addresses common problems found in this area, by constructing a molecular tool that allows the control of cells while they are forming a tissue through light.

This approach allows the production of tissue structures that are specific to somebody's own cell and has the potential to overcome many of the problems seen in human-to-human transplantation.

Advantages

• Using a patient’s own cells to create such tissues ensures there will be no rejection by the host
• Independent of long transplant waiting lists patients would not suffer the impaired living conditions and death due to a failing organ
• Streamlining the production of tissues in vitro would reduce the costs and enable access to transplantations to people living in underprivileged conditions

A combination of optogenetic genes and light stimulating these genes has the potential to allow precise spatiotemporal control of tissue generation at the cellular and even molecular level.

Optical stimuli in comparison to mechanical ones do not require physical stimulation. As shown through multi-photon microscopy, it is possible to activate single molecules on a molecular level through the simultaneous exposure to different light sources. This means optical stimuli have the potential to activate photosensitive proteins in space and time at a subcellular level on the in- and outside of a growing tissue.

In comparison to chemical stimuli, optical stimuli do not diffuse in solution and the risk of off-target cell activation is reduced.

Furthermore, for future standardization, optical stimuli do not require specific scaffolds to build on. However, they do require a one-time acquisition of light sources capable of dynamically controlling the optogenetic circuits inside the cells.

The optogenetic guidance system has to control the following mechanisms in the cells of a growing tissue:

Currently, in the synthetic biology community we need to resolve the need for more optogenetic tools and to characterise the existing ones better.

LIT’s aim is to bring us one step closer to a synthetic biology future in tissue engineering by focusing on the better characterisation of existing optogenetic tools in two scenarios: instantaneous cell adhesion and light-induced gene activation & regulation.

Instantaneous cell adhesion

The problem

While in the developing embryo cell adhesion is tightly regulated through a myriad of events that happened before and after the connection has formed, a synthetic tissue cannot rely on this stream of previous information.

Instantaneous cell adhesion is, therefore, a prerequisite for the formation of synthetic tissue structures. This instantaneous cell adhesion needs to mimic the natural mechanisms as much as possible but at the same time be photosensitive. LIT therefore came to the conclusion that the mechanism has to be post-translational because transcriptional control would require too long to form connections. Furthermore, post-translational control is mostly exerted through protein-protein inhibition which in comparison to transcriptional control results in less noise and fewer off-target activation.

Design

Using the human body's natural way of cell adhesion we first designed a BioBrick based on the preproprotein of E-cadherin (BBa_K2332312) which we received as a gift from Prof. Stephen Price, UCL, and tested its capability of forming cell-cell adhesions via aggregation assays. E-cadherin is a calcium-dependent cell adhesion molecule that functions in the establishment and maintenance of epithelial cell morphology during embryongenesis and adulthood. During the secretory pathway the encoded preproprotein undergoes proteolytic processing to generate a mature protein.

Previously, iGEM UCSF 2011 used the extracellular domain of E-cadherin (BBa_K644000) trying to form cell connections. However, E-cadherin’s function depends not only on the presence of calcium but also on the bonding of linker-proteins like alpha and beta catenin to the cytosolic domain of E-cadherin and the actin filaments in the cortex of the mammalian cell. This ‘anchoring’ results in stable mass action and the formation of adherens junctions between cells.

LIT investigated entry points into E-cadherin’s physiology that would render the protein photosensitive. We chose the interaction between the cytosolic domain of E-cadherin and beta-catenin. By fusing the novel photocleavable protein PhoCl to the cytosolic domain of E-cadherin the interaction with beta-catenin is sterically inhibited. PhoCl is an engineered green-to-red photoconvertible fluorescent protein (Zhang et al. 2017) which we received as a gift from the Robert Campbell lab, University of Alberta, Canada. It consists of 232 amino acids that are cleaved into an ~66-residue N-terminal fragment and an ~166-residue C-terminal fragment. We designed a new BioBrick based on PhoCl (BBa_K2332311) and a BioBrick of the E-cadherin-PhoCl fusion protein (BBa_).

The fusion protein cannot form stable cell-cell connections due to the lack of interactions with the actin cortex. However, after 400 nm, violet light exposure the sterical interference of the N-terminal 66 amino acid PhoCl remnant is too weak to inhibit the formation of connections between E-cadherin and the actin cortex. Stable connections can now be formed between cells and photo-activation is achieved.

A two-step experimental approach was chosen: first test the E-cadherin preproprotein via an aggregation assay for the ability to form patterns and then test the E-cadherin-PhoCl fusion for photo-sensitivity.

Results

Light-induced Gene Activation & Regulation

The problem

Precise and reliable gene activation is essential for cellular control. LIT believes that light fulfils the physical requirements to act as the tool for gene activation. Different approaches have been tried in the past to activate genes via light.

To address the limitations in other approaches based on light, researchers adapted the CRISPR-Cas9 activator system for optogenetic control. Polstein et al. 2015 showed that fusing the light-inducible heterodimerizing proteins CRY2 and CIB1 from Arabidopsis thaliana to the VP64 transactivation domain and either the N- or C- terminus of dCas9, the catalytically inactive form of Cas9 (D10A, H840A) allows induction of transcription of endogenous genes in the presence of blue light.

This light-activated CRISPR-Cas9 effector (LACE) system can easily be modified by changing the gRNA that is expressed inside the cell and therefore allows dynamic on- and off-switching of genes. Nihongaki et al. 2015 modified the LACE system by using the transactivation domain of NFκB, called p65, instead of VP64 and activated endogenous and exogenous genes in a spatiotemporally confined manner.

However, these LACE systems are limited by the exposure time to blue light and require widefield illumination of the entire cell in order to activate both components, the dCas-CIB1 and the CRY2-TF. Gene activation in these systems requires constant blue light exposure for at least 2-3 hours for measurable results.

In the context of controlling cells to form tissues, this dependence on widefield illumination presents a major problem. All cells in the tissue would be illuminated at the same time and no specificity could be achieved. It is therefore necessary to reduce the required exposure time for the activation of the LACE system and render the activation mechanism independent of widefield illumination.

Design

Our solution is a LACE system that does not depend on heterodimerizing proteins from plants but instead on post-translational control exerted through a photocleavable linker.

The system consists of four essential units: a transmembrane domain, a photocleavable linker, dCas9 and a transactivation domain (p65, VP64, VP16).

Based on these prerequisite we designed BioBrick BBa_K2332317, a single-illumination light-activated CRISPR-Cas9 effector (siLACE) system localised to the plasma membrane of the cell via the photocleavable linker PhoCl. By localising the system to the plasma membrane the dCas9 fused to the transactivation domain is preprogrammed to not enter the nucleus and can therefore not activate any target gene inside the nucleus.

However, a single laser beam of 400 nm, violet light has been shown to be able to cleave PhoCl. After cleavage, the dCas9-TF is able to enter the nucleus, directed by attached nuclear localisation sequences. Inside the nucleus the system uses gRNAs to find the endogenous target gene and induce transcription.

The illumination radius of such the laser is many magnitudes below the dimensions of a standard mammalian cell (diameter: 10-15 µm; volume: ~4,000 µm3). This means that our siLACE system is not only able to activate genes on a single cell level but even modulate the expression via subcellular activation of only certain plasma membrane areas.

The main advantages of this siLACE system over previous designs is its independence of widefield illumination, its ‘memory’ and its ability for modulation. The system allows activation of genes solely via a single laser beam and once activated stays in an active state until the siLACE protein is naturally degraded. Additionally by changing the laser radius and the exposure time it is possible to activate different amounts of dCas9-TF’s at the same time, leading to short or long expression of the target gene.