Team:SDU-Denmark

PowerLeaf - A Bacterial Solar Battery


ENERGY MADE BEAUTIFUL

Abstract


With the PowerLeaf, iGEM SDU is introducing a novel solution for long-term storage of solar energy, thus becoming an alternative to solar cells, without using environmentally harmful resources. We aim to accomplish this through the creation of a device visually shaped to resemble a plant leaf, thereby providing a nature-in-city ambience. The team invested heavily in public engagement and collaborations to investigate how the device hypothetically could be implemented into an urban environment. From a technical perspective, the bacterial solar battery is composed of an energy storing unit and an energy converting unit. The energy storing unit is defined by a genetically engineered Escherichia coli, that fixates carbon dioxide into the chemically stable polymer cellulose, while the energy converting unit uses genetically engineered Escherichia coli to consume the stored cellulose. Electrons retrieved from this process, are transferred to an anode by optimised nanowires, thereby creating an electrical current. Last but not least, the energy storing unit has a light-dependent system, which activates dormancy during nighttime to reduce energy lost by metabolism.

A green project, a green wiki, and a great performance in the iGEM Goes Green initiative! Green just got greener.

Introduction

Welcome to our wiki! We are the iGEM team from the University of Southern Denmark and we have been waiting in great anticipation for the chance to tell you our story.
Our adventure began with a meeting between strangers from eight different studies. Despite our different backgrounds, we had one thing in common; a shared interest in synthetic biology. Soon after this first meeting, we were herded off to a weekend in a cottage - far away from our regular lives. The cottage was a place to bond and discuss project ideas. It immediately became apparent that being an interdisciplinary team was going to be our strength as each member had unique qualities that enabled them to efficiently tackle different aspects of the iGEM competition. So, we made it our goal to take advantage of these qualities.
We decided to make a proof-of-concept project. Specifically, we wanted to use bacteria as a novel and greener solution for solar energy storage. This project was later dubbed the PowerLeaf – A Bacterial Solar Battery.
Since it is a one-page wiki, you can just keep on scrolling, and you will be taken on a journey through our iGEM experience.

Achievements


Bronze Medal Requirements

Register and Attend – Our team applied on the 30th of March 2017 and got accepted the 4th of May 2017. We had an amazing summer and are looking forward to attend the Giant Jamboree!
Meet all the Deliverables Requirements – You are reading the team wiki now, so that is one cat in the bag. You can find all attributions made to the project in the Credits section of the wiki. The team poster and team presentation are ready to be presented at the Giant Jamboree. We also filled the safety form, the judging form and all our parts were registered and submitted.
Clearly State the Attributions – All attributions made to our project have been clearly credited in the Credits section.
Improve and/or Characterise an Existing Biobrick Part or Device – The characterisation of the OmpR-regulated promoter BBa_R0082 was improved, as the level of noise was studied on different vectors.
Induction and inhibition of the pBAD promoter, BBa_I0500, were studied, whereby the characterisation of this part was improved.
Furthermore, we characterized if the periplasmic beta-glucosidase could make E. coli live on cellobiose in fluid medium BBa_K523014, submitted by the 2011 iGEM Edinburgh Team. The data obtained in these experiments are presented in the demonstration and results section.

Silver Medal Requirements


Validated Part/Contribution – We created the part BBa_K2449004, containing a cellobiose phosphorylase. This enzyme enables Escherichia coli to survive on cellobiose, which we validated by growth experiments. The data obtained in these experiments are presented in the Demonstration & Results section.
Collaboration – We have collaborated with several teams throughout our project by taking part in discussions, meetups, and answering questionnaires - we even hosted our first meetup for our fellow Danish iGEM teams. You will get to read all about this in the Credits section.
Human Practices – Our philosopher, historian, and biologist have discussed the ethical and educational aspects of our project in great detail. In extension to their work, we have been working extensively with education and public engagement .

Gold Medal Requirements


Integrated Human Practices – Regarding the development and implementation of the device, we reached out to and remained in contact with city planners from our hometown throughout our project. This regarded advice and conversations on anything from the possible design, value, safety, use, placement, and plastic type of our device. We also made sure to integrate the findings of said conversations into our overall project. Last but not least, we focused on demonstrating this process on our wiki in order to inspire future iGEM teams.
Model Your Project – Through extensive modelling, we have learned that it is possible to regulate bacterial dormancy. However, the modelling showed that it would be inadequate to only regulate the toxin RelE, as this would make the bacteria unable to exit dormancy. To regulate dormancy properly, would also require tight regulation of the antitoxin RelB. This information was used to shape the entire approach of the light-dependent dormancy system.

World Situation


A Global Challenge

In the world of today, it is becoming increasingly important to ensure a sustainable future Green Growth Papers (Myriam Linster). Material Resources, Productivity and the Environment. 2013.. Not just for our generation, but especially for the generations to come, as their possibilities should not be limited by our choices. Our solution, is the development of a green and renewable technology, which offers new advantages to the field of sustainable energy. There are currently certain limitations to the existing options for renewable energy, namely the intermittency and the diluteness problem Alexandre Chagnes JS. Global Lithium Resources and Sustainability Issues. Lithium Process Chemistry: Elsevier; June 2015. p. pp.1-40.. The intermittency problem describes the discontinuous energy production, along with inefficient storage. On the other hand, the diluteness problem is characterised as the resource-demanding production of technical devices, such as solar cells and batteries. This means that a lack of resources eventually would eliminate some of the current forms of green technology. As such, we need to introduce a new and sustainable approach to green energy to ensure the continuation of our beautiful world for the coming generations.

In a Local Environment

We are a team of young adults raised with an awareness of climate changes and the potential limitations to our ways of life. As a generation that appreciates open source and shared information, we have been encouraged to constantly challenge the ideas of yesterday. With this in mind, we decided the best solution to the eventual energy crisis would be to seek out experts and the general public, even children, in order to rethink the current notion that the only way to save our planet, is to compromise our living standards.
Fortunately, we learned through interaction with local agents that a great deal of people share our belief: that we ought to pursue the development of low energy cities with a high quality of life. In fact, we even discovered that our own hometown Odense wants to be the greenest, most renewable city in Denmark by 2050 Odense Municipality’s website, regarding their politics on the current climate changes..
In the pursuit of this goal we rose to the challenge of creating a truly green solution, which would provide an environmental friendly source of energy.
Please keep scrolling if you wish to read more about our solution, or go straight to bioethics if you are curious why we not only could, but ought to do something about the current and forthcoming energy crisis.

Inspiration

Our early ideas were reviewed after attending the Danish Science Festival, where we met several young minds with creative and inspiring ideas. The children came to our workshop with their parents to learn about bacteria, the history of GMO, ethics, and iGEM. They attended our “Draw-a-Bacteria”-competition, where they designed their own bacteria, some even with detailed stories. From this the children taught us a thing or two about the endless possibilities of GMO.



See a selection of their amazing drawings here.

Our Solution


“Well, if it can be thought, it can be done, a problem can be overcome”


E.A. Bucchianeri, Brushstrokes of a Gadfly


The vision for our bacterial solar battery is to combine two aspects, energy storage and energy conversion, by which we will produce a new and improved type of solar battery. We have named this vision The PowerLeaf. The PowerLeaf consist of two chambers that will be referred to as the outer chamber or energy storing unit and the inner chamber or energy converting unit.

  • The energy storing unit comprises genetically engineered Escherichia coli (E. coli), which uses solar energy for ATP production to fixate carbon dioxide into the chemically stable polymer cellulose. The cellulose works as the battery in the PowerLeaf, storing the chemical energy. A light sensing system activates dormancy during nighttime, leading to a reduced loss of energy through metabolism.
  • The energy converting unit uses genetically engineered E. coli to consume the stored cellulose by using an inducible switch. Retrieved electrons are transferred by extracellular electron carriers to an anode, resulting in an electrical current.

The complete system will be combined into a single device containing a compartment for each of the two units. Details about the construction and device will be discussed in the Integrated Practices section.
The device was originally designed to resemble a plant leaf aimed to provide a nature-in-city ambience. This hypothetical implementation of the PowerLeaf in an urban environment was developed through careful consideration, public engagement, and collaborations. We worked with local city planners from our hometown Odense, along with a plastic specialist from SP Moulding, the purpose of which was to advance our pre-established design, as well as attaining other changeable designs.
Our vision was clear and ambitions were high. As it turned out though, we had aimed too high, considering the limited timeframe, so at an early stage, we decided to focus on the following features:

  1. Light-dependent dormancy system
  2. Converting CO2 into glucose
  3. Biosynthesis and secretion of cellulose produced from glucose
  4. Converting cellulose to glucose
  5. Extracellular electron transfer

It will then be up to future iGEM teams to continue on the development of the PowerLeaf. We would love to see our project become a reality one day, and so we have created a special page for future iGEM teams, which includes suggestions for a further development of the project.

Project & Results

Our device is composed of two units, an energy storing unit and an energy converting unit, each divided into systems, all of which have been given a symbol to help you navigate throughout the wiki.

Energy Storing Unit


Dormancy System


Carbon Fixation


Cellulose Biosynthesis


Energy Converting Unit


Breakdown of Cellulose


Extracellular Electron Transfer


In the Project Design section, you will first be given a short introduction to the background, followed by the approach of that system, before you move on to the next system. Once you reach the next section of the wiki, Demonstration & Results, you will be guided through the performed experiments and the derived conclusions. To make things easier for you, we have continued to use the above symbols throughout our wiki.

Project Design









Dormancy System

Project Overview


Introduction


Cyanobacteria contain signal transduction systems, thereby making them capable of sensing and responding to light Bussell AN, Kehoe DM. Control of a four-color sensing photoreceptor by a two-color sensing photoreceptor reveals complex light regulation in cyanobacteria. Proceedings of the National Academy of Sciences of the United States of America. 2013;110(31):12834-9.. This ability gives the organisms the opportunity to adapt and optimize their metabolism to a circadian rhythm. Photoreceptors in the plasma membrane, of which phytochromes are especially abundant and well described, are responsible for this property Vierstra RD, Davis SJ. Bacteriophytochromes: new tools for understanding phytochrome signal transduction. Seminars in cell & developmental biology. 2000;11(6):511-21.. In 2004, the UT Austin iGEM team made a light response system consisting of a photoreceptor combined with an intracellular indigenous regulator system Levskaya A, Chevalier AA, Tabor JJ, Simpson ZB, Lavery LA, Levy M, et al. Synthetic biology: engineering Escherichia coli to see light. Nature. 2005;438(7067):441-2.. EnvZ and OmpR make up the two-component system naturally found in E. coli. The photoreceptor known as Cph1 was isolated from the cyanobacteria Synechocytis PCC6803. Cph1 has functional combination sites, which combined with the kinase EnvZ form a two-domain receptor, known as Cph8. Activation of Cph8 is mediated by the chromophore phycocyanobilin, PCB, that is sensitive to red light with maximal absorbance at 662 nm Lamparter T, Esteban B, Hughes J. Phytochrome Cph1 from the cyanobacterium Synechocystis PCC6803. Purification, assembly, and quaternary structure. European journal of biochemistry. 2001;268(17):4720-30..
When not exposed to light, PCB activates the phytochrome Cph1, thus promoting kinase activity through the EnvZ kinase. When the transcription factor OmpR is phosphorylated by EnvZ, expression of genes regulated by the OmpR-regulated promoter is initiated. Excitation of PCB by red light results in a situation where the transcription factor OmpR is not regulated. The absence of phosphorylated OmpR leads to no activation of the OmpR-regulated promoter, thereby preventing gene expression.



Figure 1. Left: Red light activates PCB, which in turn inactivates the photoreceptor complex Cph8, preventing gene expression from the OmpR-regulated promoter. Right: In absence of light, PCB is inactive, which enables the Cph8 to phosphorylate the transcription factor OmpR. This promotes gene expression from the OmpR-regulated promoter.


The photocontrol device can be used to regulate a toxin-antitoxin system, enabling the implementation of a light-dependent dormancy system. A toxin-antitoxin system is composed of two gene products, a cytotoxin and an antitoxin, the latter which neutralises the the toxic effect caused by the toxin. In E. coli K-12 the cytotoxin RelE and antitoxin RelB comprise such a system Gotfredsen M, Gerdes K. The Escherichia coli relBE genes belong to a new toxin-antitoxin gene family. Molecular microbiology. 1998;29(4):1065-76.. Expression of the cytotoxin RelE inhibits translation in the cells, due to its ability to cleave mRNA found in the A-site of the ribosome. RelB neutralises the toxic effect of RelE through interaction between the two proteins. Whether the cell lies dormant in response to expression of RelE depends on the ratio of antitoxin RelB and RelE present in the cell. Several studies have shown that RelB and RelE form a complex with RelB:RelE stoichiometry of 2:1 Overgaard M, Borch J, Gerdes K. RelB and RelE of Escherichia coli form a tight complex that represses transcription via the ribbon-helix-helix motif in RelB. Journal of molecular biology. 2009;394(2):183-96.Overgaard M, Borch J, Jorgensen MG, Gerdes K. Messenger RNA interferase RelE controls relBE transcription by conditional cooperativity. Molecular microbiology. 2008;69(4):841-57.. When the RelB:RelE stoichiometric-ratio is lowered to 1:1, studies show that RelB is not able to protect the cells against the RelE-caused translational inhibition Overgaard M, Borch J, Jorgensen MG, Gerdes K. Messenger RNA interferase RelE controls relBE transcription by conditional cooperativity. Molecular microbiology. 2008;69(4):841-57.. For further information about the light-dependent dormancy system, read here.


Modelling



Modelling of the RelE-RelB System is Essential to Avoid Irrevocable Dormancy

Controllable dormancy is a feature that holds the potential to be applied in many different situations. However, inducing dormancy and bringing the bacteria back to a metabolic active state is like balancing on a tightrope, and to establish the basis of future implementations, the properties of this system would have to be investigated further. In an endeavour to provide this basic knowledge, stochastic modelling utilising the Gillespie algorithm was performed in an attempt to prognosticate the system and simulate the interactions between the toxin and antitoxin. The toxin RelE is inhibited by the antitoxin RelB through complex formation, and both proteins interact with their promoter in a feedback mechanism. To consolidate the model, the capacity of the toxin-antitoxin system was assessed in an experiment, as the controllability of the dormancy system was studied through manual regulation of RelE and RelB expression.
You can read more about the modelling here.



Figure 2. Left: The time required for the bacteria to enter dormancy varies with the expression level of RelB. The percentage of dormant bacteria, defined as containing RelE amounts above 40 molecules per cell as a function of time in minutes. Right: Only one of the tested configurations, RelB2:50-RelE:35, causes the bacteria to regain their activity within the modelled time. The percentage of dormant bacteria, defined as containing RelE amounts above 15 molecules per cell as a function of time in minutes. The data is based on the simulation of 1000 independent bacteria.

The simulated data revealed, that when enhanced RelE production is implemented, in order to induce dormancy in E. coli, the effect come easily. However, implementation of RelB expression is also found necessary to ensure that the bacteria are able to enter an active state again.
The model showed that the system is sensitive to the RelE:RelB ratio, as well as the total amount of produced toxin. As seen in Figure 2, implementation with production rates in the vicinity of 50 and 35 molecules per minute for RelB and RelE respectively, was found to be suitable for balancing our system; the bacteria lay dormant within the computed time and re-enter an active state within minutes.
The simulated data made it evident that implementing an optimised dormancy system comprises a challenge, as the individual expression levels of RelE and RelB, as well as their interaction, has a crucial impact on the regulation of dormancy. Thus, controlled gene expression of both RelE and RelB is required to implement a controllable dormancy system in the PowerLeaf.
If you want to dig deeper into this crucial modelling of the dormancy system, read the full results here.

Approach


In 2004 the Austen and UCSF iGEM team created a device sensitive to light, laying the foundation for the Coliroid project. In this project, the system is combined with the RelE-RelB toxin-antitoxin system in the endeavour to mediate light-dependent dormancy in bacteria. As tight regulation is required for the RelE-RelB system Tashiro Y, Kawata K, Taniuchi A, Kakinuma K, May T, Okabe S. RelE-Mediated Dormancy Is Enhanced at High Cell Density in Escherichia coli. J Bacteriol. 2012;194(5):1169-76., modelling of the toxin-antitoxin system is essential. The impact of different RelE-RelB expression levels was simulated by modelling. Using the results obtained by this modelling, a hypothetical working system-design was devised.
On basis of the modulated system, the potential of different vectors and promoters in various combinations was tested. This constitutes the foundation for how the design of the light-dependent dormancy system in E. coli has been optimised, and the final approach shaped. Ultimately, the light-dependent dormancy system, which is illustrated in Figure 3, was composed of the following parts:

  • The photocontrol device controlled by the PenI-regulated promoter, BBa_R0074, on a high copy vector.
  • The antitoxin RelB controlled by pBAD, BBa_K2449031, on a low copy vector.
  • The toxin RelE controlled by the OmpR-regulated promoter, BBa_R0082, on either a low copy vector or the chromosome.

For further information about our approach, read here.



Figure 3. The final design of the light-dependent dormancy system. RelE under control of the OmpR-regulated promoter on the chromosome or a low copy vector, RelB under the control of the pBAD promoter on a low copy vector, and the photocontrol device controlled by the PenI-regulated promoter on a high copy vector.



Carbon Fixation


Project Overview


Introduction


Carbon fixation in autotrophic organisms is responsible for the net fixation of 7×1016 g carbon annually Berg IA. Ecological aspects of the distribution of different autotrophic CO2 fixation pathways. Applied and Environmental Microbiology. 2011;77(6):1925-36.. Six different pathways related to carbon fixation have been discovered, but the most widespread of these, is the Calvin-Benson-Bassham (CBB) cycle found in photosynthetic eukaryotes, e.g. plants and algae, as well as in photo- and chemosynthetic bacteria B. Bowien MG, R. Klintworth, U. Windhövel. Metabolic and Molecular Regulation of the CO2-assimilating Enzyme System in Aerobic Chemoautotrophs. Microbial Growth on C1 Compounds: Proceedings of the 5th International Symposion. 1st ed. Institute for Microbiology, Georg-August-University Göttingen, Federal Republic of Germany: Martinus Nijhoff Publishers; 1987.. Out of the eleven enzymes needed for the Calvin cycle, only three are heterologous to E. coli, namely; ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCo), sedoheptulose-1,7-bisphosphatase (SBPase) and phosphoribulokinase (PRK). By the concurrent heterologous expression of the three genes encoding these enzymes, E. coli can be engineered to perform the full Calvin cycle.



Figure 4. A simplified illustration of the Calvin cycle, with the enzymes heterologous to E. coli and their respective substrates and products shown.

The carboxysome is a microcompartment utilised by many chemoautotrophic bacteria, including cyanobacteria, as a CO2 accumulating mechanism to increase carbon fixation efficiency . This organelle-like polyhedral body is able to increase the internal concentrations of inorganic carbon by 4000-fold compared to the external concentration Mangan NM, Brenner MP. Systems analysis of the CO(2) concentrating mechanism in cyanobacteria. eLife. 2014;3.. One type of carboxysome, is the ɑ-carboxysome, which consists of a proteinaceous outer shell composed of six different shell proteins designated CsoS1ABCD and CsoS4AB. This shell encloses RuBisCo, the shell associated protein (CsoS2), and the enzyme carbonic anhydrase (CsoS3). In the proteobacteria Halothiobacillus neapolitanus, these genes are clustered into the cso operon. The carbonic anhydrase converts HCO3-, which diffuses passively into the carboxysome, to CO2, thereby driving the continued diffusion of HCO3- into the microcompartment Mangan NM, Brenner MP. Systems analysis of the CO(2) concentrating mechanism in cyanobacteria. eLife. 2014;3.. The increased CO2 concentration in the vicinity of RuBisCo increases the rate of carbon fixation by saturating the RuBisCo enzyme and increasing the CO2 to O2 ratio, enabling carboxylation to dominate over oxygenation Mangan NM, Brenner MP. Systems analysis of the CO(2) concentrating mechanism in cyanobacteria. eLife. 2014;3.. The shell associated protein is essential for the biogenesis of the ɑ-carboxysome Cai F, Dou Z, Bernstein SL, Leverenz R, Williams EB, Heinhorst S, et al. Advances in Understanding Carboxysome Assembly in Prochlorococcus and Synechococcus Implicate CsoS2 as a Critical Component. Life (Basel, Switzerland). 2015;5(2):1141-71..



Figure 5. An illustration of the ɑ-carboxysome. The shell proteins CsoS1ABC and CsoS4AB enclose the enzymes RuBisCo and carbonic anhydrase.

For the Calvin cycle to proceed, energy in the form of ATP and electrons carried by NADPH are required. The photosystems are complexes in photosynthesising organisms that can supply this by photophosphorylation. To engineer E. coli to do photosynthesis, 13 genes is needed for the assembly of chlorophyll a and 17 genes for the assembly of photosystem II, which needs to be heterogeneously expressed. An alternative process, in which a diverse array of phototrophic bacteria and archaea harvest energy from light, is through a retinal-containing protein called proteorhodopsin, which catalyses the light-activated proton efflux across the cell membrane and thereby drive ATP synthesis. Opposed to the photosystems, the proteorhodopsin is anoxygenic and generates no NADPH, which is crucial for the Calvin cycle to proceed Walter JM, Greenfield D, Bustamante C, Liphardt J. Light-powering Escherichia coli with proteorhodopsin. Proceedings of the National Academy of Sciences of the United States of America. 2007;104(7):2408-12.. For further information about the carbon fixation, read here.


Approach


In order to engineer E. coli in the outer chamber to turn atmospheric CO2 into cellulose, the carbon first needs to be fixated by the bacteria. This requires the heterologous expression of the genes encoding the three enzymes RuBisCo, SBPase, and PRK. Furthermore, the implementation of the carboxysome from the cso operon can increase the levels of carbon fixation. The 2014 Bielefeld iGEM team had worked with a similar approach in their project. In an endeavour to optimise the carbon fixation process, our project build upon their experiences. The assembly of the individual parts into a composite part, BBa_K2449030, was achieved, however, the cloning of these parts with a promoter emerged problematic. Consequently, it was decided to prioritise other aspects of the project and therefore keep this part theoretical henceforth. For further information about our approach, read here.



Cellulose Biosynthesis


Project Overview


Introduction


Bacterial cellulose is one of the most abundant biopolymers produced by different species of gram-negative bacteria, especially by Acetobactors. Glucoacetobacter xylinus is a bacterial species, which produces cellulose in large quantities of high quality Lin, SP., Loira Calvar, I., Catchmark, J.M. et al. Cellulose (2013) 20: 2191.. Cellulose is produced from the resource glucose-6-phosphate. This phosphorylated glucose is a key intermediate in the core carbon metabolism of bacteria given its importance in glycolysis, gluconeogenesis and pentose phosphate pathway Joanne Willey LS, Christopher J. Woolverton. Prescott’s Microbiology. 9th edition 2014.. Even though the pathway, where glucose and glucose-6-phosphate is converted into cellulose, only includes few steps, it requires a great amount of energy. Not only does the cell spend energy on forming UDP-glucose for cellulose biosynthesis, it also uses glucose, which otherwise would have contributed to generation of ATP Florea M, Hagemann H, Santosa G, Abbott J, Micklem CN, Spencer-Milnes X, et al. Engineering control of bacterial cellulose production using a genetic toolkit and a new cellulose-producing strain. Proceedings of the National Academy of Sciences of the United States of America. 2016;113(24):E3431-40..
The ability for G. xylinus to produce cellulose nanofibers from UDP-glucose, crystallize, and secrete it, is controlled by genes in the Acetobacter cellulose synthase (acs) operon acsABCD. This operon encodes four different proteins: AcsA, AcsB, AcsC and AcsD. A dimer, known as AcsAB, is formed by a catalytic domain, AcsA, and a regulatory domain, AcsB. This dimer is responsible for synthesising the cellulose nanofibers from UDP-glucose, whereas AcsC and AcsD secretes cellulose and forms an interconnected cellulose pellicle around the cells Mehta K, et al. Characterization of an acsD disruption mutant provides additional evidence for the hierarchical cell-directed self-assembly of cellulose in Gluconacetobacter xylinus. Cellulose. 2014;22:119–137., as illustrated in Figure 6.



Figure 6. The AcsAB dimer synthesises cellulose nanofibers. AcsC and AcsD mediate the secretion and formation of an interconnected cellulose pellicle.

Other genera, including some E. coli strains, secrete cellulose as a component of their biofilm. Even though cellulose biosynthesis is intrinsic to E. coli, the quantity of the production is incomparable to cellulose biosynthesis in G. xylinus. Indigenously, E. coli is not capable of degrading cellulose into a metabolisable energy source Gao D, Luan Y, Wang Q, Liang Q, Qi Q. Construction of cellulose-utilizing Escherichia coli based on a secretable cellulase. Microbial Cell Factories. 2015;14:159.. However, if this structural and water-holding polymer is enzymatically degraded, first into cellobiose and then to glucose residues, the cellulose polymer is a potent source of energy Arai T, Matsuoka S, Cho HY, Yukawa H, Inui M, Wong SL, et al. Synthesis of Clostridium cellulovorans minicellulosomes by intercellular complementation. Proceedings of the National Academy of Sciences of the United States of America. 2007;104(5):1456-60..

Approach


To link the two bacterial compartments of the PowerLeaf, an efficient way to store the harvested energy was required. Research led to the finding that storing the chemical energy in cellulose would be a suitable approach, since this is a polysaccharide that bacteria normally are unable to degrade Gao D, Luan Y, Wang Q, Liang Q, Qi Q. Construction of cellulose-utilizing Escherichia coli based on a secretable cellulase. Microbial Cell Factories. 2015;14:159.. After looking into earlier iGEM projects it was found that the 2014 project Aqualose from Imperial College London, had worked with optimisation of cellulose biosynthesis in E. coli. Our aim was to enhance cellulose biosynthesis in E. coli MG1655, which naturally secretes small amounts of cellulose as a part of its biofilm Gualdi L, Tagliabue L, Bertagnoli S, Ierano T, De Castro C, Landini P. Cellulose modulates biofilm formation by counteracting curli-mediated colonization of solid surfaces in Escherichia coli. Microbiology (Reading, England). 2008;154(Pt 7):2017-24.. This would be achieved by the cloning of plasmids containing the cellulose synthase operon acsABCD, utilising the two parts BBa_K1321334 and BBa_K1321335, constructed by Imperial College London 2014. This would enhance the cellulose biosynthesis and thereby optimise the energy outcome of the entire system in our project. Due to cloning difficulties, it was decided to prioritise other aspects of the project and therefore keep this part theoretical henceforth. For further information about the cellulose biosynthesis approach, read here.



Breakdown of Cellulose


Project Overview


Introduction


Cellulose is a natural biopolymer used for a vast variety of biological purposes and it is most commonly found in plants, where it serves as the main structural component. Since plants are primary producers, many organisms of the Earth’s ecosystems have adapted accordingly Lynd LR, Weimer PJ, van Zyl WH, Pretorius IS. Microbial Cellulose Utilization: Fundamentals and Biotechnology. Microbiology and Molecular Biology Reviews. 2002;66(3):506-77.. One of the key evolutionary features for the primary consumers, was the development of the ability to degrade cellulose into glucose, which could then be used as a cellular fuel. A simple organism, able to efficiently do so, is the Cellulomonas fimi, which converts cellulose to glucose in a two-step process, with cellobiose as the intermediate Jung SK, Parisutham V, Jeong SH, Lee SK. Heterologous Expression of Plant Cell Wall Degrading Enzymes for Effective Production of Cellulosic Biofuels. Journal of Biomedicine and Biotechnology. 2012;2012..


Breakdown of Cellulose to Cellobiose
Cellulose is a long polysaccharide consisting of β-1,4-linked D-glucose units and many organisms, including E. coli, lack the enzymes able to degrade these strong β-linkages. To overcome this, the C. fimi has developed two cellulases, namely the endo-β-1,4-glucanase and exo-β-1,4-glucanase, respectively encoded by the cenA and cex genes Jung SK, Parisutham V, Jeong SH, Lee SK. Heterologous Expression of Plant Cell Wall Degrading Enzymes for Effective Production of Cellulosic Biofuels. Journal of Biomedicine and Biotechnology. 2012;2012.. The endoglucanase is able to randomly degrade the amorphous structure of cellulose, thereby allowing the exoglucanase to cleave the β-1,4 linkages at every other D-glucose unit. Thus, disaccharides are released in the form of cellobiose Lam TL, Wong RS, Wong WK. Enhancement of extracellular production of a Cellulomonas fimi exoglucanase in Escherichia coli by the reduction of promoter strength. Enzyme and microbial technology. 1997;20(7):482-8., as illustrated in Figure 7. Cellulose itself is too large to be transported across the bacterial cell membrane, and therefore, the breakdown of cellulose into cellobiose must take place in the extracellular fluid.

Figure 7. Degradation of the β-1,4 linkages in cellulose mediated by the enzymes endo-β-1,4-glucanase and exo-β-1,4-glucanase, thereby creating cellobiose.

The α-Hemolysin Transport System
The ɑ-hemolysin transport system is an ABC transporter complex consisting of three proteins, namely the outer membrane protein TolC, hemolysin B (HlyB), and hemolysin D (HlyD) Gentschev I, Dietrich G, Goebel W. The E. coli alpha-hemolysin secretion system and its use in vaccine development. Trends in microbiology. 2002;10(1):39-45., which can effectively transport intracellular hemolysin A (HlyA) to the extracellular fluid. Utilising a linker peptide, the protein of interest can be fused with HlyA. Once a protein is HlyA-tagged, it can be recognized by the ATP-binding cassette HlyB, which will initiate transportation of the HlyA-tagged protein to the extracellular fluid, as seen in Figure 8 Gentschev I, Dietrich G, Goebel W. The E. coli alpha-hemolysin secretion system and its use in vaccine development. Trends in microbiology. 2002;10(1):39-45. Su L, Chen S, Yi L, Woodard RW, Chen J, Wu J. Extracellular overexpression of recombinant Thermobifida fusca cutinase by alpha-hemolysin secretion system in E. coli BL21(DE3). Microbial Cell Factories. 2012;11:8..

Figure 8. The enzymes encoded by the cenA and cex genes are linked to HlyA. HlyB recognises HlyA and initiates transportation of the HlyA-tagged protein from the cytosol to the extracellular fluid

Uptake of Cellobiose
While cellulose is too large to be pass the cell membrane, transportation of cellobiose is a common feature found in many organisms. An example is E. coli, which utilises the membrane protein lactose permease (LacY) Sekar R, Shin HD, Chen R. Engineering Escherichia coli Cells for Cellobiose Assimilation through a Phosphorolytic Mechanism. Applied and Environmental Microbiology. 2012;78(5):1611-4., whereby the cellobiose is enzymatically catabolised in the cytosol.

Degradation of Cellobiose to Glucose
Through evolutionary events, many organisms have developed the ability to express enzymes, capable of breaking the β-linkage in cellobiose. E. coli expresses the periplasmic β-glucosidase encoded by the bglX gene, which is known to have said feature, hydrolysing the cellobiose β-linkageUniProt entry for bglX. Saccharophagus degradans expresses a different enzyme, which efficiently cleaves the β-linkage in cellobiose, namely cellobiose phosphorylase encoded by the cep94A gene. This enzyme phosphorylates the cellobiose at its β-linkage, resulting in the degradation of cellobiose to D-glucose and α-D-glucose-1-phosphate Sekar R, Shin HD, Chen R. Engineering Escherichia coli Cells for Cellobiose Assimilation through a Phosphorolytic Mechanism. Applied and Environmental Microbiology. 2012;78(5):1611-4., as seen in Figure 9.

Figure 9. Phosphorylation of the β-1,4-linkages in cellobiose by the enzyme cellobiose phosphorylase, thereby producing D-glucose and α-D-glucose-1-phosphate.

Approach

Cellulose to Cellobiose
In the endeavour to engineer E. coli to utilise cellulose as it’s only carbon source, inspiration was drawn from the Edinburgh 2008 iGEM team project, who developed two BioBricks containing the cenA and cex genes. In this project, the α-hemolysin transport system was utilised by creating HlyA-tagged endo- and exo-β-1,4-glucanases, using a peptide linker. To implement this system in E. coli, heterogeneous expression of hlyB, hlyD, cenA-hlyA and cex-hlyA was required.
To achieve this, DNA synthesis of cenA and cex was ordered, each tagged with HlyA. The genes encoding HlyB and HlyD were retrieved from the part BBa_K1166002 by phusion PCR. Using the resulting PCR product, the following construct was composed for the degradation of cellulose into cellobiose, as illustrated in Figure 10.

Figure 10. BioBrick, containing the genes cenA, cex, hlyB, and hlyD controlled by PenI-regulated promoters.

Cellobiose to Glucose
The Edinburgh 2011 iGEM team team created a BioBrick with the bglX gene, which is endogenous to E. coli, in the endeavour to increase the efficiency of the degradation of cellobiose to glucose. However, it seems that the enzymatic activity of the periplasmic β-glucosidase has faded as a result of evolution, rendering E. coli incapable of surviving solely on cellobiose. Thus, even though E. coli can absorp cellobiose, it is not able to survive with this as it’s only carbon source.
As a solution to this, a part containing the cep94A gene was synthesised, with the intend to enable E. coli to survive solely on cellobiose. Thus, a construct containing cep94A controlled by a LacI-regulated promoter, was composed, as illustrated in Figure 11.

Figure 11. BioBrick comprising cep94A controlled by a LacI-regulated promoter. This part was cloned into both a high and low copy vector.



Extracellular Electron Transfer


Project Overview


Introduction


Microbial fuel cell
Electrochemical devices, such as batteries and fuel cells, are broadly used in electronics to convert chemical energy into electrical energy. A Microbial Fuel Cell (MFC) is an open system electrochemical device, consisting of two chambers; an anode chamber and a cathode chamber, which are separated by a proton exchange membrane, as illustrated in Figure 12. Both the anode and the cathode in an MFC can use various forms of graphite as base material and in the anode chamber, microbes are utilised as catalysts to convert organic matter into metabolic products, protons, and electrons Khanal YLaSK. Microbial Fuel Cells, Capter 19. In: Khanal. EbYLaSK, editor. Bioenergy: Principles and Applications. First Edition ed: Published 2017 by John Wiley & Sons, Inc.; 2016.. This is carried out through metabolic pathways such as glycolysis, thereby generating ATP needed to maintain cellular life. This metabolic pathway also releases electrons, which are carried by NAD+ in its reduced form, NADH.

Figure 12. A microbial fuel cell utilising glucose as substrate. The glucose is consumed to protons, electrons, and CO2. The electrons are transferred to the anode while the protons diffuse over the proton exchange membrane. A gradient causes the electrons to flow through an external load to the cathode, which generates an electrical current.


Under aerobic conditions, the generated NADH will deliver its electron as part of the electron transfer chain, thereby returning to its oxidised form NAD+. Under anaerobic conditions the electron transport chain will be unable to continue, which will cause the generated NADH to accumulate, and as a consequence, the concentration of available NAD+ for glycolysis will decrease. This will drive the cell to carry out other metabolic pathways, such as fermentation, in order to maintain its ATP levels. Instead, the accumulating NADH generated under anaerobic conditions, can be utilised to drive an electrical current by depositing the retrieved electrons to an anode coupled with an appropriate cathode. The cathode catalyst in an MFC will usually catalyse the reaction of 2 H+ + ½ O2 per H2O. The transfer of electrons from NADH to the anode can be executed in three different ways, as shown in Figure 13; redox shuttles, direct contact electron transfer, and bacterial nanowires Logan BE, Hamelers B, Rozendal R, Schroder U, Keller J, Freguia S, et al. Microbial fuel cells: methodology and technology. Environmental science & technology. 2006;40(17):5181-92.Khanal YLaSK. Microbial Fuel Cells, Capter 19. In: Khanal. EbYLaSK, editor. Bioenergy: Principles and Applications. First Edition ed: Published 2017 by John Wiley & Sons, Inc.; 2016..

Figure 13. Three different ways to transfer electrons from microorganisms to an anode. a) Transfer of electrons to the anode using a redox shuttle.Two different types of redox shuttles exit: One going through the membrane and another receiving electrons from membrane proteins. b) Transfer of electrons to the anode by direct contact. c) Electrons are carried from the inside the cell, directly to the anode through nanowires.


The redox shuttles use extracellular electron mediators, which hold the advantage of not being limited by the surface area of the anode, although it is restricted by the slow diffusion of the extracellular mediators. The direct contact electron transfer is, in contrast to the redox shuttles, strongly limited by the surface area of the anode, but the membrane bound cytochromes that are in direct contact with the anode, rapidly deliver the electrons. Bacterial nanowires are known to efficiently transfer electrons, as for the direct contact electron transfer. However, bacterial nanowires are not as strictly limited by the surface area of the anode as the direct contact electron transfer. This is due to the ability of bacterial nanowires to form complex networks of interacting nanowires in biofilm, thereby efficiently transferring electrons from distant microbes to the anodeKhanal YLaSK. Microbial Fuel Cells, Capter 19. In: Khanal. EbYLaSK, editor. Bioenergy: Principles and Applications. First Edition ed: Published 2017 by John Wiley & Sons, Inc.; 2016..


Bacterial Nanowires
Nanowires are long electrically conductive pili found on the surface of various microorganisms, such as the metal reducing Geobacter sulfurreducens. G. sulfurreducens utilises nanowires to transfer accumulating electrons retrieved from metabolism, to metals in the nearby environment Mahadevan R, Bond DR, Butler JE, Esteve-Nuñez A, Coppi MV, Palsson BO, et al. Characterization of Metabolism in the Fe(III)-Reducing Organism Geobacter sulfurreducens by Constraint-Based Modeling. Applied and Environmental Microbiology. 2006;72(2):1558-68.. This Gram-negative bacteria is strictly anaerobic, as it is unable to transfer its electrons to the environment in the presence of the highly reducing oxygen. Nanowires found in G. sulfurreducens are type IV pili polymer chains composed of pilA monomers, and they can reach a length of nearly 10 mm Richter LV, Sandler SJ, Weis RM. Two Isoforms of Geobacter sulfurreducens pilA Have Distinct Roles in Pilus Biogenesis, Cytochrome Localization, Extracellular Electron Transfer, and Biofilm Formation. Journal of Bacteriology. 2012;194(10):2551-63.. The proteins required for the effective transfer of electrons by nanowires is a complex and poorly understood system, which includes an extensive series of c-type cytochromes as shown in Figure 14 Morgado L, Fernandes AP, Dantas JM, Silva MA, Salgueiro CA. On the road to improve the bioremediation and electricity-harvesting skills of Geobacter sulfurreducens: functional and structural characterization of multihaem cytochromes. Biochemical Society transactions. 2012;40(6):1295-301..

Figure 14. The electrons from NADH are transferred to menaquinone (MQ), reducing it to menaquinol (MQH2), the inner membrane-associated MaCA cytochrome receives the electrons and reduces the periplasmic triheme cytochromes (PpcA-PpcE). The electrons are mediated to the outer membrane-associated cytochromes, OmcB and OmcE, and further transferred to cytochromes on the pili Morgado L, Fernandes AP, Dantas JM, Silva MA, Salgueiro CA. On the road to improve the bioremediation and electricity-harvesting skills of Geobacter sulfurreducens: functional and structural characterization of multihaem cytochromes. Biochemical Society transactions. 2012;40(6):1295-301..

The electrical conductivity of the nanowires in G. sulfurreducens can be optimised by exchanging endogenous pilA with heterologous pilA rich in aromatic amino acids. Tan Yang et. al 2017 Tan Y, Adhikari RY, Malvankar NS, Ward JE, Woodard TL, Nevin KP, et al. Expressing the Geobacter metallireducens pilA in Geobacter sulfurreducens Yields Pili with Exceptional Conductivity. mBio. 2017;8(1).heterogeneously expressed pilA from G. metallireducens in G. sulfurreducens, which increased the electrical conductivity of the recombinant bacteria 5000-fold. This optimisation holds great potential in the development of highly efficient bacterial strains for MFCs. With the intention of optimising an MFC, G. sulfurreducens is a lot easier to work with than G. metallireducens Tan Y, Adhikari RY, Malvankar NS, Ward JE, Woodard TL, Nevin KP, et al. Expressing the Geobacter metallireducens pilA in Geobacter sulfurreducens Yields Pili with Exceptional Conductivity. mBio. 2017;8(1)., since G. metallireducens has a longer generation time.


Approach


Originally, it was intended to implement bacterial nanowires from G. sulfurreducens into E. coli. Through research, it was found that the Bielefeld iGEM team from 2013 had come to the conclusion, that this task was too comprehensive to undertake in the limited time of an iGEM project. However, a different approach was deviced, as postdoc Oona Snoeyenbos-West suggested us to use G. sulfurreducens as the model organism for our MFC.
It was then decided to work on optimisation of the G. sulfurreducens by increasing the electrical conductivity of its endogenous nanowires. To achieve this, synthesis of the pilA genes from G. metallireducens was ordered, which was used to create a BioBrick. Using the same approach for homologous recombination as in the dormancy system, a DNA fragment containing the chloramphenicol resistance cassette of the pSB1C3 backbone, was made for later selection of recombinant G. sulfurreducens. The PCR product was ligated with fragments retrieved from the 500 bp upstream and downstream regions of the chromosomal pilA genes of the G. sulfurreducens PCA strain, creating the fragment seen in Figure 15.

Figure 15. The linear DNA fragment intended for homologous recombination into G. sulfurreducens.


Demonstration & Results







Dormancy System

Project Overview


hi hi there



Breakdown of Cellulose


Project Overview


hi there


Extracellular Electron Transfer


Project Overview


Parts & Procedures

In this section, you will find all the needed information to replicate our approach and experiments. The constructed parts, notebook, SOPs and protocols will show in a pop-up window , from which you can obtain all the necessary knowledge, should you be interested. An essential part of going to the lab is risk and safety assessments, which you will find at the end of the section.

Parts


Notebook


SOPs and Protocols


Safety


Proper Risk Management

Biosafety and proper risk assessment are important aspects to consider before any handling of genetically modified organisms (GMOs). There are several concerns that must be addressed properly. The safety of the public as well as of the environment is of the utmost importance, but the safety of the person in direct contact with the GMOs should not be compromised either. The risk associated with laboratorial work can be evaluated using the statement “Risk = Hazard ✕ Probability”. To responsibly address this inquiry, the entire team was given a mandatory lab safety course held by Lab Technician Simon Rose. In addition, we received a detailed handbook regarding lab safety. This ensured that all our team members were well equipped to work safely in the lab. Throughout the project we have continuously been evaluating the safety of our work. These assessments can be found in the safety form. Furthermore, our team participated in the 5th annual BioBrick workshop hosted by DTU BioBuilders. Here we participated in a lab safety course before entering their laboratories. Both of these lab safety courses gave us the necessary knowledge to work safely with GMO and handle waste appropriate, as well as the according procedures in case of an emergency.
In the lab, we worked with several potentially harmful chemical agents such as dimethylsulfoxide (DMSO), ethidium bromide, chloroform, phenol, Congo red, antibiotics, and autoclaved glycerol. These chemical agents were handled using gloves at all times, and whenever deemed necessary, handled in a fume hood. Gloves were worn when necessary, and clean lab coats were worn restrictedly in the laboratorial areas. To visualise bands in agarose gels, we used an UV board. UV rays are carcinogenic when exposure is frequent and prolonged. To reduce the amount of exposure, several precautions were made. Gloves, long sleeves and a facial screen were worn at all times, and the time spend at the UV board was kept at a minimum.

Public and Environmental Risk Assessment

The chassis organisms containing the system is meant to be contained in a device, which is incorporated into an urban environment. While this device would be a safely enclosed container, it still possess the risk of physical breakage from violent acts or environmental disturbances. For this reason, we consulted a plastics expert, who advised us to use the plastic known as Polycarbonate. This plastic is remarkably durable, with the ability to ward off most physical traumas. The plastics expert has estimated that such a container would last in an urban environment for at least 20 years, and most likely more than that. To illustrate the durability of the plastics, he notified us of several devices from the 1980s made of the same plastic, which still stand strong today.
One of the biggest concerns would be the release of GMOs into nature. While the GMOs used are not pathogenetic, they would be able to share the plasmids containing antibiotic resistance selectors to other bacteria, that might be pathogenic. Antibiotic resistance in pathogenic bacteria complicates the treatment of an infected individual and could, in tragic cases, be the difference between life and death. However small the risk of this scenario might be, it should be addressed properly. Furthermore, antibiotic resistant E. Coli strains could outmatch some of their fellow E. Coli strains through natural selection. This could negatively affect the balance of nature, that we are aiming to restore with the development of the PowerLeaf.
To avoid these risks, several kill switch mechanisms should be implemented into the final device. This could be performed by implementation of a kill switch activated by exposure to light in the energy converting unit. This would of course mean, that the energy converting unit’s container would need to block all sunlight. A task that could easily be carried out by adding Carbon Black to the required areas of the container. The energy storing unit, which requires light to function, could then have a kill switch which makes it dependent on the presence of the energy converting unit. This could be accomplished by having harmless molecules, not naturally found in nature but required for the survival of the energy converting unit, circulating in the system. A similar effect could be accomplished by making the bacteria in the energy converting and storing units codependent on each other for their survival. The implementation of such kill switch mechanisms would tremendously improve the biosafety of the device by opposing hazards related to any kind of physical breakage.

List of Assessed Items


Chassis Organisms
Escherichia coli strains: K12, TOP10, MG1655, KG22, BW25113, DF25663127, SØ928
Geobacter Sulfurreducens strain: PCA
Vectors
pSB1A2: An iGEM plasmid backbone carrying a ampicillin resistance gene
pSB1A3: An iGEM plasmid backbone carrying an ampicillin resistance gene
pSB1C3: An iGEM plasmid backbone carrying a chloramphenicol resistance gene
pSB3C5: An iGEM plasmid backbone carrying a chloramphenicol resistance gene
pSB1K3: An iGEM plasmid backbone carrying a kanamycin resistance gene
pSB4K5: An iGEM plasmid backbone carrying a kanamycin resistance gene
pSB3K3: An iGEM plasmid backbone carrying a kanamycin resistance gene
Bacteriophages
P1 phage, using its site-specific recombinase for transduction of E. Coli

Practices

“Change is the law of life; and those who look only to the past or present are certain to miss the future”


John F. Kennedy


Welcome to our Human Practices! Now, when it comes to the particulars of our Human Practices, you will find that it has been separated into three main parts. This is all strictly for narrative purposes, as every single aspect of our project and Human Practices, are deeply intertwined through a shared philosophy: If you want change, look to the future!


1. A Philosopher’s Guide to the Future


To ensure an ethically sound iGEM product and experience, we have discussed the ethical considerations that ought to be taken into account. As luck would have it, one of our team members is a philosopher with an interest in bioethics. Thus a guidebook was created, a guide that amongst other things includes an overview of some of the bioethical arguments iGEM participants are likely to encounter, when discussing synthetic biology. You can find these considerations in our section on Bioethics.


2. An Implementation of the Future


We reached out to our local Municipality of Odense along with various experts, for their advice on the development and implementation of our device in an urban environment. You can read more about this in our section on Integrated Human Practice.


3. A Trip to the Future and Beyond!


Considering how our main philosophy was: If you want change, look to the future! It seemed prudent to bring our message on sustainability to the next generation. You can read more about our efforts in the section on Education and Public Engagement.

Bioethics


- A Philosopher’s Guide to the Future


“The facts of life... to make an alteration in the evolvement of an organic life system is fatal. A coding sequence cannot be revised once it's been established.”


Tyrell, Bladerunner


Synthetic biology and the iGEM competition are aimed to help solve societal issues, issues such as agriculture, medical research, and environmental resource management, the last of which has been our motivation throughout our project. However, while synthetic biology offers many new exciting possibilities, several concerns have to be met when dealing with living organisms. Against, the excitement of the iGEM community, skeptics have pointed to the uncertainty and potentiality for unwanted consequences that might arise from working with synthetic biology. We as a team decided to give these concerns some serious thought! We have had several conversations on topics such as meta ethics, applied ethics, sustainability, GMO, and so on. Furthermore, we established an open and honest mode of discourse to use when engaging with other teams and the public. We held a workshop in bioethics in relation to our Danish Meetup. This workshop consisted of a historical insight into the history of GMO provided by our very own historian, as well as a hefty, kind-hearted debate, supervised by our own philosopher.
All of these considerations, debates, and results led our philosopher Lene to write a longer guidebook entailing an overview of the various bioethical arguments often made for and against the use of synthetic biology. The guidebook is mainly an insight into the most important ethical considerations made by our team, e.g. how they shaped our product, but it also offers a personal and clear overview of arguments and principles meant to help future teams to get a conversation on ethics started!
Make sure to give this guidebook a read, it is definitely worth it!

Integrated Practices


- An Implementation of the Future


“The best way to predict your future, is to create it”


Abraham Lincoln - (former) president of the United States of America


Not that we can claim to be anything like Abraham Lincoln, or even to be vampire hunters. Nonetheless, we do agree that to create the future we all hope for, we must contribute to find a sustainable solution for a greener future. Before we can tackle the task of providing a sustainable future for the entire world, we must first look to our own local environment. We believe that the best way to gain a better understanding of a global dilemma, is to examine how a local environment is affected by it. Hopefully, this approach will help future iGEM teams find a connection between global issues and local ones. This approach has helped us elucidate specific issues and find sustainable solutions, which can be implemented into our society with the help and endorsement of local agents.

A Statement from the Mayor of Odense

We first decided to reach out to the mayor of Odense, to investigate the possibilities for iGEM to help in the government's endeavours to make Odense a CO2 neutral city.

“We face a series of challenges that we have to recognise, in the chase of the good and sustainable life in the city of Odense. Some of these concern local circumstances, while others contain national and even global issues. We as the municipality can only go so far on our own. So, we are entirely dependent on the help of local agents. It makes me so happy, when the students of the city, have taken on the mantle of developing new green technologies that solves global issues, while contributing to local city growth”


Peter Rahbæk Juel - Mayor of Odense


The core philosophy of our Integrated Human Practices has been to incorporate local experts in the development of our project. We wanted to examine how results produced in the laboratory, could be used to shape a product that corresponds with the green values of Odense.
We sought the advice of experts in other fields, e.g. expert in plastics to design the best possible exterior of our device. Furthermore, we met with business developer Ann Zahle Andersen to investigate the core value of our product from a business perspective.
We believe that Human Practices have played an essential role in our iGEM project. Everything from the design of our prototype to ethical considerations have been influenced by the people we engaged with.

Interviewing Smart City Odense


For the possible implementation of the PowerLeaf in the local environment of Odense, we decided to reach out to Kristina Dienhart, project manager of Smart City Odense. Smart City Odense is a project within Odense Municipality, that seeks to combine urban planning with new technologies and open-data toward creating a smarter, more sustainable city.
This made us aware of necessities essential to Odense and its citizens. She gave us feedback that we integrated into numerous areas of our overall project.

  • Changeability - From Mrs. Dienhart’s point of view, one of the most advantageous attributes of our device is the potential for changeability in the size and shape of the design. We had yet to consider the PowerLeaf as a device not limited by physical dimensions. This has been the most significant element we took with us from the interview. Changeability is a necessity to a city planner, as various laws and aesthetic considerations need to be taken into account, when altering or creating an urban environment.
  • Accessibility - She also discussed accessibility with us. The citizen will not use our device unless it is easily accessible. This means that the overall design of the PowerLeaf, regardless of its aesthetics, always needs to be designed with a user in mind. Reflecting on the advice of Mrs. Dienhart, we decided to reevaluate the means of implementation of the PowerLeaf to ensure that the need for accessibility and user-comfort is met.
  • Essentiality - She supported our notion if the needs for accessibility and changeability are met, the PowerLeaf could help ensure that citizens of Odense use and remain in the public space for a longer amount of time. Something that is valuable, not only to the individual citizen, but also to the community as a whole, as it creates a sense of city cohesion and hence a high quality of city life.

Mrs. Dienhart introduced us to several considerations that shaped large parts of our project. We do not know the needs of every urban area in Odense and consequently, we have aimed to create a device that is changeable to a city in movement such as Odense.
Furthermore, this interview was also a source of inspiration for our ethical and safety thoughts. While we ought to strive for a sustainable tomorrow, we do not necessarily have to provide an exhaustive description of what the future should look like.

Interviewing the City Renewal Project My Bolbro


Rikke Falgreen Mortensen is the manager of the Bolbro’s city renewal project called Mit Bolbro i.e. My Bolbro. We arranged a meeting with her with the intent of further investigating how the PowerLeaf could and should be integrated in an urban area of Odense, in this case the neighbourhood of Bolbro.


Bolbro is an old neighbourhood in Odense historically known to be the home of the working class. While Bolbro provides a homely atmosphere known to the locals, it has had a hard time attracting new residents. However, this is subject to change as the neighbourhood in 2016 received approximately 1.6 million US dollars to renew its city space and to create an even more appealing, and vibrant neighbourhood. This will be achieved by including the locals, as Bolbro is characterized by having a strong, engaging civil society. Mrs. Mortensen is not only an expert in urban renewal, but also in how to include local citizens in reshaping the public space in which they reside.
Mrs. Mortensen also argued that a changeable design would be the optimal solution to fit the challenges one faces in creating a vibrant, green city ambience. Such a task depends on different preferences, laws and needs. A technology needs to be both flexible and accessible to successfully contribute to the process of creating an engaging city environment. She showed great interest in our device and even offered to implement it in the parks of Bolbro, should the product become a reality.

We had a discussion with Mrs. Mortensen about the creation of a prototype based on the wishes of Bolbro’s local citizens. Following this conversation, she provided us with a pitch that aimed to help us develop this prototype.

“Hauge’s square is a spot in Bolbro, which we aim to make a central place in Bolbro; a place that invites the citizen to meet and dwell. Your solution should be able to contribute to help citizens recharge their phones, e.g. a solution could be implanting the PowerLeaf into a interactive furniture, but where the demand an aesthetic pleasing design still remains.



“A part of the vision of this project is the concept of making a pop-up park with differently designed multi-furniture, preferably in wood and organic design, which are removable to the various areas where we are going to develop in the district. It is furniture that should be able to be used to relax in and at the same time also motivates children to move. There is also a need for charging devices and it therefore demands that your solution is an integrated, but still mobile solution, as the park will move physically over time. Finally, the playground is to be developed especially for the young audience, which is a major consumer of power for phones. The playground must be a place where youngsters hang out after school, while maintaining its status as a green space.”



The making of the furniture as a prototype called for a revisit of our safety concerns. We now knew that children would be climbing and playing on the furniture, making it crucial that the material of the PowerLeaf will not break. This is a concern we discussed with Flemming Christiansen, which you can read all about next.

Finding the Proper Material

Criteria to the Prototype
The system itself will consist of two different compartments, an outer and an inner chamber. The first will be facing the sun, while the other will be facing the building or furniture. Since one culture of the bacteria depends on solar energy to produce its product, the outer compartment must allow for sunlight to pass. It should here be noted that the prototype is purely hypothetical, as the membrane, between the two compartments, should exclusively be permeable to cellulose. For that reason, we wanted to find a material, that fulfilled our established criteria, so that we could illustrate the technology. The device itself will be made entirely from plastic, a material that is thought to be undesirable due to the difficulties in its disposal. This is due to plastic being of a xenobiotic nature, making it generally recalcitrant to microbial degradation Fewson CA. Biodegradation of xenobiotic and other persistent compounds: the causes of recalcitrance. Cell. 1988.. Following these concepts, we can identify the following set of criteria for the desired material:


  • Solar exposure. The material covering the solar cell, must allow sunlight to pass through to reach the bacteria.
  • UV resistance. As the material will be exposed to the sun, it must be resistant to the UV radiation.
  • Bacterial growth The material must neither be growth inhibitory, nor toxic to the bacteria.
  • Easy to mold. The outside of the device could be molded depending on the circumstances, as the device only relies on the bacterial technology.
  • Durability. The device will be located outside, meaning that the material must be able to withstand hard conditions and heavy weight.
  • Temperature. The material must allow for an appropriate constant temperature for the bacteria, despite the variations in sun exposure.
  • Longevity. We would like for the material to have as long a durability as possible, since replacing the device could prove cumbersome. We are aiming for at least twenty years of durability.
  • Price. We are looking for a material that is as cheap as possible, without sacrificing the necessary criteria.
  • Environmentally friendly. Considering the goal of this project being the creation of an environmentally friendly energy source, the ideal material would be as green as possible.

Interview with Flemming Christiansen

For the purpose of finding the necessary materials for our prototype, we contacted one of the leading plastic experts in Denmark, Flemming Christiansen , who acts as the market development manager of SP Moulding. He has been acting as a plastics consultant since his graduation as a master of science in Engineering, with a speciality in plastics. A meeting was quickly arranged for the purpose of confirming our criteria, the technical design, the material, and the possible price of creating the PowerLeaf.


In accordance with our established criteria, Mr. Christiansen suggested that we use the plastic known as Polycarbonate, specifically Lexon 103R-III Polycarbonate. Unfortunately, the material cannot fulfil the criteria on its own. He therefore suggested that we take a few liberties with it. In order to prevent UV degradation to the exposed parts, we will be adding certain additives to the surface. This increases the UV resistance of the device, without hindering the sunlight from reaching the bacteria.
During our conversations with Mr. Christiansen, we reached the topic of what to do in case of a breach. Should the container against all expectations be damaged, the environment will be exposed to the GMO inside. The solution we came up with was the possible implementation of a kill-switch in the inner compartment, making it vulnerable to sunlight. Should the bacteria of said unit be exposed to sunlight, they would perish. As the outer compartment would be dependent on the continued coexistence of the two units, the entire GMO system would be purged in case of a breach . To implement this feature, the inner chamber would be covered with Carbon Black, which has the ability to absorb sunlight, thus leaving the compartment itself in darkness.
The process of constructing our device would be through an extensive use of Injection Moulding, which is considered pricey equipment. The material is expensive at 4-5.5 USD per kg at orders above 1 metric ton, according to Mr. Christiansen, but its longevity and durability means it would not need to be replaced for a long time. Lastly, we discussed the reusability of Polycarbonate, which he assured us was of no concern, as the material could be reused and recycled with ease.



Click here to see a detailed version of the prototype.


Workshop with Business Developer Ann Zahle Andersen


For the purpose of getting a business perspective on our project, we met with Business Developer Ann Zahle Andersen. She arranged two workshops for us based on a business model canvas. She encouraged us to view our project, as if we meant to make startup business. These workshops gave us a better comprehension of society’s pull and pushes on a project like ours. This forced us as a team to get to the bottom of what we found important about our project.

Upcoming Meeting with Borgernes Hus


Borgernes Hus i.e. House of the Citizens is a new initiative offered by the City Central Library. The initiative aims to offer guidance and advice to projects such as ours. It is meant to aid Odense in its journey towards the status of becoming a modern Danish city. Unfortunately, the building remains under construction until after our trip to Boston, meaning that they have been busy with the construction while our project was underway. It is for this reason that we, along with director Jens Winther Bang Petersen, agreed that a future collaboration would be the most suitable solution.
It is our hope, that a collaboration with Borgernes Hus will be of assistance to future iGEM teams from SDU as well as other students from Odense.

Education & Public Engagement


- A Trip to the Future and Beyond!



If you want change, look to the future! Such was the wording of our core philosophy. A philosophy that was carried out, by reaching out to the people of our society to ensure the engagement of the next generation, within the world of synthetic biology.
Ever since World War II, the West has seen an expansion and intensification of anti-scientific sentiment, which today primarily concern Genetically Modified Organisms (GMO). We will for that reason explore GMO’s role in history, to see if a historical perspective will allow us reach a new understanding of these sentiments. You can read all about it here.


Danish Science Festival


At the Danish Science Festival we hosted a workshop for kindergarteners, during which we taught them about synthetic biology, sustainability, the history of GMO, and bioethics. The children would in turn teach us as well, as they showed us the endless possibilities for bacteria designs, through the “Draw-a-Bacteria”-contest. This inspired us to reevaluate our initial idea.


School Project Interview with 6th Graders


Following the Danish Science Festival, we were contacted by two enthusiastic 6th graders, Bastian and Magnus. The two boys wanted to learn more about iGEM and GMO, which they intended to write about in a school project. They were curious to what range GMO could be used, and how we utilised it in our project, the PowerLeaf.


UNF Summer Camp


The UNF Summer Camp is an opportunity for high school students to show extra dedication towards science. We talked to some of the brightest young minds imaginable, all of whom aim to work in different fields of science in the future. At the summer camp, we held a presentation about our project, the iGEM competition, as well as how to handle and work with genes. We taught them how to assemble BioBricks and provided them with BioBricks for DNA assembly experiments, creating a ‘hands-on’ experience for these enthusiastic teenagers.
One of the high school students suggested that the Powerleaf should be able to rotate according to the sun, to ensure maximum exposure and outcome. We took this brilliant advice into consideration and contacted Robot Systems Engineer student, Oliver Klinggaard, who helped us with the potential implementation of a pan/tilt system. He provided us with his recent project report on the subject, as well as a description of the adjustments required for the implementation in our system, which you can find here.
Two students from the UNF Summer Camp thought the PowerLeaf was an interesting approach to sustainable energy, and they wanted to hear even more! So, they contacted us in late October, as they were interested to work on a project about green technology.



The Academy for Talented Youth


We hosted a workshop for the Academy for Talented Youth, an association for some of the most talented high school students in Denmark. During the workshop we invited the students into our laboratories, where they conducted a miniprep and a gel electrophoresis on bacteria containing our BioBricks. Additionally, we held a presentation and discussion about our project, with the dedicated students. We strongly believe in mutual communication and made sure to compile feedback, all of which was positive!



Presentations for the Local Schools


The local high schools, Mulernes Legatskole and Odense Tekniske Gymnasium, invited us to present our project, in addition to starting discussions with the students about GMO.
An 8th grade class from the local public school, Odense Friskole, were invited to see our laboratory workspace. It was a challenge to successfully convey our project and the concept of synthetic biology in a way that would be easily understandable by 8th graders, who have only recently been introduced to science. A challenge that we accepted and solved, by relaying the fundamentals in synthetic biology, e.g. the basics of a cell, DNA, and GMO.
From all of these presentations and interactions with younger individuals, we had a strong intuition that it had made an influence on their awareness of synthetic biology. This intuition was supported by the positive feedback provided by teachers and students. An awareness of how new scientific technologies can be a feasible solution to a possible energy crisis. Technologies such as synthetic biology, with endless capabilities to achieve efficacy, since no one knows what tomorrow brings. For more information about this read To Future iGEM Teams


Final Presentation at SDU-Denmark


The day before we travelled to Boston, we booked one of the big auditoriums at the University of Southern Denmark, for the final rehearsal of our jamboree presentation. We made sure to take note of all the feedback and tips we received, while also implementing these into our final presentation. This event was promoted on all the information screens at our university in order to attract a broad audience and increase the interest for iGEM. Thus, making it possible to reach a substantial amount of future applications for the SDU-iGEM team and ensure that the iGEM spirit will continue to prosper in the future!


Social Media


Social media is an easy way to impact a high number of people, so a strategy was concocted with the intention of reaching as many people as possible with our outreach. Our strategy yielded marvellous results, amongst which was a video on our project, that reached viewers equal to 16% of our hometown’s population, along with becoming the second most seen bulletin of the year from University of Southern Denmark. They have also asked us to film our experiences at the Jamboree, which will feature on the homepage of the student’ initiative BetonTV. Several articles were written about our project in local newspapers, one was even featured in the saturday special.
You can read all about our social media strategy and results
here. The commercial can be seen right here:


Prospects

The aim of our prospect section is to expand on the vision of the PowerLeaf; a vision we would love to see realised. An overview of the project, has been created, in the hope that it will benefit future iGEM teams. Additionally, it is aimed to assist iGEM teams-to-be, should they wish to take the PowerLeaf to the next level.

Perspectives


Building a Product for a Better Future

The purpose of the PowerLeaf is to provide a greener alternative to the currently available sources of energy. An important aspect of such an undertaking is to limit the use of depleting resources in the construction of the device itself. This is accomplished through the use of the most common resources available, namely recyclable plastics and bacteria. In turn, this will contribute to our dream of building a better future. A future where fear of reaching a critical shortage of natural resources has been eliminated. Another benefit of the PowerLeaf is the bacteria's ability to self-replicate, if provided with the essential nutrients.
As tools for genomic editing improves, the advancement of biological devices will conceivably become even more complex and independent. They will do so by introducing new metabolic pathways originated from other organisms using genetic engineering. This could potentially allow the PowerLeaf to become completely independent through its self-replication. Independency would occur, when the bacteria are modified to produce their own essential nutrients directly from unwanted pollution in the environment. This trait would lead to cleaner cities, along with providing a natural solution of sustainable energy.

Genetic Code Expansions for Biological Engineering

In an effort to advance the current technologies used in synthetic biology, research groups are working on genetic code expansion. We had an interesting talk from postdoc and former iGEM participant, Julius Fredens, about his work on genetic code expansion. Once a technology like this expands, it will completely revolutionise biological engineering, including that of the PowerLeaf. Genetic code expansion could be used for optimisation of the systems in the PowerLeaf, such as optimisation of nanowires, improvement of the light-sensing system, and making the breakdown of cellulose inducible.

To Future iGEM Teams


Hello future iGEM’er and congratulations on starting your iGEM journey! You are going to have an amazing time with plenty of wonderful experiences, new friendships, and an extensive amounts of obtained knowledge. In this section some ideas for improvement and further development of our project, the PowerLeaf, will be presented.

Further Development of Our Project

For those of you that are interested in our project and would like to improve upon it, this is the section you have been looking for. We have listed the systems and the related information needed for the fulfillment of the device we envisioned. Nonetheless, you should not feel restricted by these suggestions. You shall be more than welcome to contact any of us regarding questions about the project. You can find each of our team members contact informations in the Team section in the credits.


Investigated and Researched Systems

  • Dormancy System
    Utilised by the energy storing unit, the dormancy system can reduce metabolism during times of the day with no solar energy available, e.g. at nighttime. We encountered a few challenges during the assembly and optimisation of the dormancy system. However, through modeling we obtained vital knowledge on how to regulate the system. If you are interested, you can read more about the work performed on the light-dependent dormancy system.
  • Carbon Fixation
    We received the required parts from the Bielefeld 2014 iGEM team and began assembling the parts into one fully functional BioBrick. However, we encountered some trouble cloning these parts. You can give it a go anyways, or maybe even try to redo the carbon fixation by using a system from a different organism. Regrettably, we eventually had to let go of this system, so we could focus on other components of the PowerLeaf. If you are interested, you can read more about the work we did regarding the carbon fixation.
  • Cellulose Biosynthesis and Secretion
    These parts were retrieved from the 2014 Imperial College iGEM team. Assembly of these long BioBricks emerged to be troublesome, which regularly occurs when cloning long sequences of DNA. Thus, this part could be the very thing to improve, as it is a rather central part of the system. If you are interested, you can read more about our work on the cellulose biosynthesis and secretion.
  • Cellulose Breakdown
    Employed by the energy converting unit, this system degrades cellulose to glucose, from which electrons could be retrieved. After extensive work the system showed promising results as our bacteria were able to grow on cellobiose. If you are interested, you can read more about the work we did regarding the cellulases.
  • Extracellular Electron Transfer
    Inspired by a previous study Tan Y, Adhikari RY, Malvankar NS, Ward JE, Woodard TL, Nevin KP, et al. Expressing the Geobacter metallireducens pilA in Geobacter sulfurreducens Yields Pili with Exceptional Conductivity. mBio. 2017;8(1)., we set out to create the required BioBricks for the system. However, to successfully implement optimized nanowire in G. sulfurreducens, further work would have to be performed. If you are interested, you can find additional information about the work we did regarding the nanowires.

Subjects that Ought to be Implemented in the Device

  • ATP Production from Solar Energy
    Harvest of solar energy comes to mind as one of the most essential systems needed for the PowerLeaf to actually work. We had to select parts of the PowerLeaf to work on, and at the end of the day, we decided to cut this subpart. Instead, we had a great Skype call early on in the process with the Australian Macquarie iGEM team, who has been working for several years with the implementation of the photosynthetic systems in E. coli.
  • Cellulose and the Cellulases forming an On/Off Switch
    This is also a very crucial part of the PowerLeaf, since it would otherwise be generating an electrical current non-stop, even when not needed. Thereby overthrowing the potential for long term-storage of solar energy. We believe this can be solved either through precise gene circuit regulation or by physical compartmentalisation, but there might be even more elegant ways in which to handle this challenge.
  • Physical Engineering of the Hardware
    It should be possible for the energy storing unit to convert CO2 into cellulose, thereby producing O2 making its chamber aerobic. For the energy converting unit to effectively transfer retrieved electrons to an anode, it requires anaerobic conditions. Thus the removal of O2 from the device is an obstacle to overcome. It will require some out-of-the-box thinking to come up with a novel idea without having to require more energy than produced.
    To make a workable prototype of the PowerLeaf, proper engineering of the hardware is necessary. This includes elements such as anodes, chambers, circulation of important nutrients, removal of wastes, and the use of appropriate materials. We worked out the optimal type of plastic for the system with the help of a local expert. You can read about our work regarding the plastic here.

Credits

“You'll stay with me?” - “Until the very end”


J.K. Rowling, Harry Potter and the Deathly Hallows


Just like in the movies, you only get to meet the brilliant minds behind the project in the closing credits. Some might leave the cinema without sitting through the credits, but we hope you will sit through ours, as you will get to know us on a more personal level. We probably have more in common than you think. And do not forget that behind every great team is an equally great amount of external attributions. The contributors have supported and inspired us, especially when things have been rough and deadlines closeby. When you finish this section, we kindly ask that you turn your attention to our various collaborations, all of which have been amazing experiences. They truly show of that wonderful iGEM spirit!
Finally, we do not want you to miss out on the ‘after-the-credits-clip’ that summarises the fun we had during this fantastic iGEM adventure. This is will be the moment you will get that long-awaited ‘thank you for listening, we hope you enjoyed our wiki and project’.

Team


Welcome to the team page! Here you will get to know us on a more personal level. Our team is made up by 12 students from 8 very different majors. As friends, we experienced the most amazing summer together, filled with various fun activities, both in- and outside the lab. We would like to mention a few. We had road trips, dinners, Game of Thrones nights, heck, we even celebrated Christmas in July! All of this was shared with our amazing supervisors, to whom we are truly grateful.


Ellen Gammelmark


Study: Biochemistry and Molecular Biology
E-mail: elgam15@student.sdu.dk
Why, hello there! My name is Ellen and I have spend most of my waking hours either in the lab with a pipette in hand, or just outside the lab with a computer on my lap. You know - learn iGEM, live iGEM, love iGEM!

Emil Bøgh Hansen


Study: Biology
E-mail: ehans15@student.sdu.dk
Howdy! I’m the first of many Emil’s and the team's only biologist! I am a huge wolf enthusiast! This summer I left my boots in the closet, in order to put on a proper lab coat and suit up for iGEM. In addition to my time in the lab, I have also looked into how GMO can influence the environment and what we need to do to ensure a safe iGEM project.

Emil Søndergaard


Study: History
E-mail: emsoe09@student.sdu.dk
Ahoy thar! My name is Emil, and I want to be the next Indiana Jones. But before I can raid any tombs, I’ve decided to raid iGEM trophies. When I’m not cooking or travelling, I’m drawing on my background in history for communications and human practices.

Emil Vyff Jørgensen


Study: Physics
E-mail: ejoer15@student.sdu.dk
Mojn! I am yet another Emil. I might not be a model biochemist, so instead I am modelling biochemistry! My iGEM existence is a stochastic binary function between naps and extreme bursts of energy.

Felix Boel Pedersen


Study: Biochemistry and Molecular Biology
E-mail: feped15@student.sdu.dk
Aloha. My name is Felix and I bring joy to others by eating my daily ryebread with paté and wearing my magical red racer rain coat. Speaking of magic, I’m the team’s wiki lizard (get it?). I also do dry-lab, and whenever I miss the “sunlight”, I kindly join the others in the wet lab.

Frederik Bartholdy Flensmark Neergaard


Study: Biochemistry and Molecular Biology
E-mail: frnee15@student.sdu.dk
Hey yo! I’m Frederik and I have worked day and night on iGEM, mostly drinking beers at night time, but that should count as well. When I’m not working in lab or on the PC, I have fun with my teammates and tell bad dad jokes. I also make crazy ideas come true - like celebrating Christmas in July.

Frederik Damsgaard Højsager


Study: Medicine
E-mail: frhoe14@student.sdu.dk
Heyah! I’m the other Frederik. I’m a green, lean, coffee-machine. I’ve been the steady supplier and consumer of coffee on the team. My main focus has been on how to build a sustainable iGEM project. I’ve been planting trees, eating green and lowering our team's carbon footprint. Oh, and did I also mention that I starred in our commercial? You can get autographs later.

Jonas Borregaard Eriksen


Study: Pharmacy
E-mail: jerik15@student.sdu.dk
Hey sup? I’m Jonas and used to like sports, partying, eating cake, hanging out with friends and other such things most people like to do. During iGEM these interests have changed… As I have been enslaved in the lab, I’ve come to realise that the only purpose of my life is to be in the lab.

Lene Vest Munk Thomsen


Study: Philosophy
E-mail: letho11@student.sdu.dk
Hey, is it solipsistic in here, or is it just me? When not wondering whether or not there is an external world, I’ve been busy working out how to implement our solar battery into our local community and what to gain from doing so. Oh, and imposing metaethics on my team members, but I Kant go into detail with this here.

Malte Skovsager Andersen


Study: Biochemistry and Molecular Biology
E-mail: malta14@student.sdu.dk
Eyy, I’m Malte. I’ve mostly been working in the lab wrapped in the dankest of lab coats, doing the most exciting of experiments. All in the name of why the heck not. In the lab the utmost highest level of patience is needed, especially when tasked with testing if BioBricks function as intended. This has, as seen in the image, sadly caused me to pull out most of my hair.

Sarah Hyllekvist Jørgensen


Study: Biochemistry and Molecular Biology
E-mail: sajo415@student.sdu.dk
Despite my favorite occupation is digging into literature, my main attribution to our project has been to run around in the lab. Luckily, there is a clear link between wet- and dry-lab. Even though I am the smallest member of the SDU iGEM team, I have definitely risen to the occasion. iGEM has been an amazing period of my life!

Sofie Mozart Mortensen


Study: Biomedicine
E-mail: sofmo15@student.sdu.dk
Hi there! My name is Sofie, and I am the team mama! I am the one who makes sure everyone gets their fair share of cake and baked goodies. When I’m not in the kitchen busy making cakes for my teammates, you can find me in the lab with a pipette in my hand.

Project Synergism


We have all been working together in every aspect of our project. Nevertheless, some people have had to focus on some areas more than others. The main groups are listed as follows;

  • The group focusing on fixation of CO2, production of cellulose and light-dependent dormancy system consisted of Sarah Hyllekvist Jørgensen, Ellen Gammelmark, Sofie Mozart Mortensen and Emil Bøgh Hansen.
  • The group focusing on the breakdown of cellulose to create an electrical current and the optimisation of nanowires consisted of Felix Boel Pedersen, Frederik Bartholdy Flensmark Neergaard, Jonas Borregaard Eriksen and Malte Skovsager Andersen.
  • The group focusing on the implementation of the device in an urban environment as well as our outreach consisted of Emil Søndergaard, Frederik Damsgaard Højsager and Lene Vest Munk Thomsen.
  • The mathematical modelling of our project was single-handedly performed by Emil Vyff Jørgensen.
  • Coding and design of the wiki was performed by Felix Boel Pedersen and Frederik Damsgaard Højsager.

To ensure a good team spirit and dynamic we formulated a cooperation agreement.
Nothing can be done alone, so please scroll further down, to read about all the people who contributed to making our project successful. We are so grateful for all the help and support we have been offered throughout our iGEM experience.


Collaboration


"Alone we can do so little; together we can do so much"


Helen Keller


The American author Helen Keller had it right! As an iGEM team, you can reach many goals, but as an entire community, we can aspire to achieve so much more. We would like to thank all the people that made our iGEM experience so memorable, we truly enjoyed your companionship!

Danish Ethics and Wiki Workshop at SDU

In the spirit of the iGEM community, we hosted a meetup in August for our fellow Danish iGEM teams: InCell from the University of Copenhagen (KU), and the Snakebite Detectives from the Technical University of Denmark (DTU). A total of seven members from these two teams joined us for breakfast and attended our meetup. This was the first ever iGEM meetup hosted by our university, so we decided to make it memorable. We took advantage of our interdisciplinary team roster, and thus designed a wiki and ethics workshop to aid our fellow Danish teams.
We utilised the broad interdisciplinary profile of our team, to have Emil S. and Lene present the perception of science throughout the history and the meta-bioethical aspects of GMO, respectively. Emil S. has a Bachelor of Arts in History, and Lene has a Bachelor of Arts in Philosophy. The ethical presentation was purposely turned into an ethical debate, where viewpoints of ethical conduct were exchanged and discussed. After the presentations and discussions on metaethics, it was time for the wiki workshop.
The SDU-Denmark iGEM teams have won the Best Wiki prize several times in the past. As such, we wanted to share the knowledge gained from our university's experience. To facilitate this exchange of knowledge on wiki development, we recruited our current supervisor Thøger Jensen Krogh, to facilitate presentations on how to design a good wiki page. Thøger was qualified for this task through his role as the designer of the SDU iGEM 2013 and 2014 team wikis, both of which won the special prize on both occasions. During the presentation, Thøger had arranged several exercises where the attendees got to mingle, discuss and evaluate their wikis. This resulted in a steady flow of information and constructive feedback between all three teams.
After a long day of learning and discussing, we went for a tour around campus under the summer sun. This concluded in a visit to the roof terrace of the campus dormitory, followed by dinner. It was requested, by our fellow Danish teams, to make the SDU meetup an iGEM tradition.

Attending Meetups

Besides hosting our own meetup, we also attended several meetups during our iGEM experience. The first of which, was the 5th Annual Biobrick Workshop in March, hosted by the Technical University of Denmark, DTU-Denmark. This meetup not only gave us our first experience with Biobricks, but also worked as a foundation for friendships across different teams.
Our second meetup, the Nordic iGEM Conference was hosted by the University of Copenhagen, UCopenhagen, and took place in June. The main focus of this meetup was the traditional mini Jamboree. Participating in this meetup gave us useful feedback from both the judges as well as from our fellow iGEM teams. This helped us greatly to shape and develop our project for the better.
To celebrate the beginning of our iGEM summer, we went on a road trip to attend the European Meetup, hosted by the Delft University of Technology in the Netherlands. Here we discussed ideas regarding our project at a poster session, and learned about all the other great iGEM projects. We also made new friends from all over Europe.

Further Collaboration

In regard to our project, we have been in contact with the iGEM teams from Bielefeld and Imperial College, who helped us by sending crucial parts, relevant to the execution of our project.
As our project revolves around global warming and green sustainable energy, we were thrilled to hear about the iGEM Goes Green initiative made by the TU Dresden iGEM team. Following their guidelines, we have calculated the carbon footprint of our laboratory work and travelling. We have, in part, tried to make up for our carbon footprint, by changing our travelling and eating habits in our everyday lives. Furthermore, we have reduced our daily electricity consumption, our wiki became CO2 neutral, and we made an effort to sort our waste. The full report can be scrutinised here. Due to our team being the most green dream team, TU-Dresden asked us to lead the iGEM Goes Green project in year 2018.
We sought expertise from the Macquarie Australia iGEM team, who has worked with the implementation of photosynthesis in E. coli since 2013. We had an interesting Skype call with their team, where we discussed the particular challenges their previous teams had experienced throughout their projects.
We were also able to help the Stony Brook iGEM team by facilitating communication with members of the SDU iGEM team from 2016.
During our project we received several questionnaires from fellow iGEM teams. We were delighted to help the teams by answering their questionnaires. These included from:

  • Waterloo - regarding 3D printing of lab equipment
  • Dalhousie - regarding the common conception of science literature
  • University of Washington - regarding communication platforms used by teams
  • Vilnius-Lithuania - regarding cotransformation
  • Nanjing-China - regarding a whole-cell sensor for formaldehyde
  • University of Sydney - regarding the use and accessibility of insulin
  • Georgia State - regarding disabilities
  • Greece - regarding modular RNAi-based logic circuits

Attributions


Nothing can be done alone, so please scroll further to read about the contributors, who helped make this project a reality.

Laboratory, Technical and General support


We would like to give a special thanks to our supervisors:

  • Assistant professor, Mikkel Girke Jørgensen, for his general support and advice on the project, the laboratory, the fundraising and our team synergy.
  • Ph.D. student and former iGEM participant, Patrick Rosendahl Andreassen, for his guidance and technical assistance in the laboratory.
  • Ph.D student and former iGEM participant, Thøger Jensen Krogh, for his help in developing the wiki, as well as his laboratory guidance.
  • Cand.phil student and former iGEM participant, Tim Munk, for his focus on team dynamics and advice for our human practices.


We would also like to thank:

  • Academic assistant, Tina Kronborg, for her guidance in the lab, as well as for providing us with laboratory equipment.
  • Medical Laboratory Technician, Simon Rose, for giving us a course in lab safety, risk assessment and general guidance in the lab.
  • Postdoc, Oona Sneoyenbos-West, for providing us with Geobacter Sulfurreducens PCA and the necessary knowledge on how to grow this particular bacterial strain. Furthermore, she helped us greatly with helpful discussions regarding the advancement of our project. We would also like to thank her for lending us her laboratory, for the cultivation of G. Sulfurreducens PCA.
  • Postdoc, Satoshi Kawaichi, for his assistance in measuring the electrical conductivity of our nanowires, as well as providing us with knowledge on the G. Sulfurreducens.
  • Business scout and PhD, Ann Zahle Andersen, for presenting us with the necessary tools for the development of innovative business ideas.
  • Stud.scient, Kristian Severin Rasmussen, for helping us use the oCelleScope for testing.
  • Stud.scient, Brian Baltzar, for hosting a workshop regarding the use of Adobe Illustrator, which has been a great help to the development of graphics for our wiki.
  • Ph.D student, Richard Xavier Etienne Valli, for helpful discussions in the lab.
  • Software Developer, Jonas Hartwig, for his help on some JQuery functionality on the wiki.
  • Stud.scient, Birka Jensen, for general advice and suggestion on how to build an iGEM wiki.
  • Stud.med, Ida Charlotte Hvam, for helpful discussions on the development of our wiki, helping with last minute figures to the wiki, as well as proofreading its content.
  • Stud.med, Maria Victoria Mikkelsen, for helpful guidance regarding the composition of experiment pages and proofreading.
  • Stud.med, Liza Gaardsted Hansen, for proofreading our wiki in the 11th hour.
  • Ph.D student and current iGEM advisor for the Bielefeld team, Boas Pucker, for providing us with BioBricks created by former iGEM teams from Bielefeld.
  • Our iGEM HQ Representative, Traci Haddock-Angelli, for her general guidance and assistance in registering our Danish Ethics and Wiki Workshop to the official iGEM meetup page.
  • iGEM HQ Representative and Lab Technician, Abigail Sison, for her help in registering our Danish Ethics and Wiki Workshop to the official iGEM meetup page.
  • Stud.polyt, Oliver Klinggaard, for helpful discussions on the implementation of a pan-tilt system and for providing us with his project report on the subject.
  • DTU BioBuilders, for hosting their 5th Annual Biobrick Workshop and for attending our Danish Ethics and Wiki Workshop.
  • The UNIK Copenhagen iGEM team, for hosting the Nordic Meetup and for attending our Danish Ethics and Wiki Workshop.
  • The TU-Delft iGEM team, for hosting the European Meetup.
  • Mimo Antabi, for adding our adverts to the University of Southern Denmark’s info screens preceding the Danish Science Festival.
  • Anders Boe, for putting an enormous amount of work into the postproduction of our commercial.
  • Allan Haurballe Madsen, for helping us with our appearance at the Danish Science Festival.
  • Outreach Coordinator and PhD, Lise Junker Nielsen, for for helping us with the Danish Science Festival as well as with the visit from the Academy for Talented Youth. We would also like to thank her for providing us with iPads for laboratory use.
  • The Danish Science Festival, for having us at their annual event. We would also like to thank all the visitors who attended our booth, especially the children who participated in our ‘Draw-a-Bacteria’-contest.
  • The high schools Odense Technical Gymnasium, Mulernes Legatskole and Academy for Talented Youth, for letting us present our project and to engage in rewarding discussions about synthetic biology.
  • The UNF Biotech Camp, for having us present our project to the attending students.
  • The elementary school, Odense Friskole, for letting us present our project for their 8th grade students, thereby forcing us to contemplate how to convey a subject depending on the audience.
  • All former iGEM participants from SDU, for attending our preliminary presentation and giving us feedback before the Giant Jamboree.
  • The following groups and associations, for helping us develop our human practices: SP-Moulding, Borgernes Hus, Kommunens bygninger, Bolbro - områdefornyelse, Odense Byudvikling.
  • Project manager (Smart City Odense), Kristina Dienhart, for wonderful advice on how to involve Odense Municipality in our project. We want to thank her for our conversation on the implementation of The PowerLeaf in Odense. We would also like to thank her for leading us to the ongoing project of Bolbro’s city renewal.
  • Project Manager Bolbro City Renewal (DitBolbro), Rikke Flagreen Mortensen, for meeting with us to discuss how The PowerLeaf could be implemented in the neighbourhood of Bolbro. We would also like to thank her for providing us with a pitch and reading-materials on Odense’s green goals.
  • Director of audience - and Central Library Odense (Borgernes Hus), Jens Winther Bang Petersen, for our email correspondence and upcoming meeting with members of our iGEM team.
  • MATLAB user Nezar, for an easy implementation of the gillespie algorithm into MATLAB.
  • Flemming Christiansen, for his guidance and expertise in choices regarding materials and prototype.

Sponsors


Thanks to:

  • The Faculty of Science at University of Southern Denmark, for providing us with the fundamental funds required for our participation in the iGEM competition, and for providing us with laboratory benches and essential equipment.
  • The Faculty of Health Sciences at University of Southern Denmark, for their much needed funding of our project.
  • Integrated DNA Technologies, for providing us with 20 kilobases of gBlock gene fragments.
  • SnapGene, for providing our team with memberships to their software during the duration of the competition.
  • PentaBase, for sponsoring us with 10,000 DKK worth of oligos and a further 10% discount.
  • New England Biolabs, for providing our team with a BioBrick® Assembly Kit, a Q5® High-Fidelity 2X Master Mix and a Quick-Load® Purple 2-Log DNA Ladder.
  • CO2 Neutral Website, for attributing to green energy in our name, and thereby eliminating the carbon footprint our wiki makes.
  • Piktochart, for extending their student offer to our mail, and for providing us with easy access to great graphics.

Litterature


Final Words


Thank you for your time! We hope you enjoyed our wiki and getting to know our project.
Now you can sit back, relax, and be proud of your hard work. While you do so, feel free to enjoy some of the less serious pictures and snippets from our amazing iGEM adventure.
Take a look at these telling pictures from our iGEM experience.