Difference between revisions of "Team:TecCEM/Experiments"

Line 366: Line 366:
 
                 <span class="caret"></span></button>
 
                 <span class="caret"></span></button>
 
                 <div class="dropdown-menu">
 
                 <div class="dropdown-menu">
−
                     <h3>Preparation of chemocompetent cells</h3>
+
                     <h3>Plasmid extraction</h3>
 
                     <ul><h4>Materials</h4>
 
                     <ul><h4>Materials</h4>
−
                         <li>LB Medium</li>
+
                        <li>Transformed E. coli DH5a cells./li>
−
                         <li>01. M CaCI2</li>
+
                         <li>LB + CAM</li>
−
                         <li>CaCL2 0.1M + 15% glycerol</li>
+
                         <li>STET Buffer</li>
−
                         <li>Sterile Falcon tubes</li>
+
                        <li>Lysozyme</li>
 +
                        <li>RNAse A</li>
 +
                        <li>3 M Sodium acetate</li>
 +
                         <li>Isopropanol</li>
 +
                        <li>70% ethanol</li>
 +
                         <li>Injectable water</li>
 
                     </ul>
 
                     </ul>
 
                     <ol><h4>Steps</h4>
 
                     <ol><h4>Steps</h4>
−
                         <li>Inoculate an isolated colony of an Escherichia coli strain in a tube containing 10 mL of LB medium and incubate overnight at 37°C and 260 rpm.</li>
+
                         <li>Seed an isolated colony of each transformed Escherichia coli strain in 10 mL of LB+CAM in a test tube and incubate for 16 hours at 37oC at 260 rpm.</li>
−
                         <li>Inoculate 100 mL of LB broth with 1 mL of the previous culture.</li>
+
                         <li>Centrifuge all the culture in 2 mL sterile microtubes at 13,000 rpm for 1 minute in order to retrieve the pellet.</li>
−
                         <li>Incubate for 3 hours at 37 °C and 260 rpm until it reaches a 0.6 O.D.</li>
+
                        <li>Remove the supernatant and wash the pellets without resuspending with 350μL of STET Buffer (0.1M NaCl, 10 mM TRIS-HCl pH 8, 1 mM EDTA pH 8 and Triton X-100 5%)</li>
−
                         <li>Place on ice for 10 minutes.</li>
+
                        <li>Resuspend with 350 μL of STET Buffer and add 25μL of fresh lysozyme (2 mg/mL).</li>
−
                         <li>Divide the culture in 15 mL Falcon tubes and centrifuge at 5000 rpm for 5 minutes.</li>
+
                         <li>Incubate for 4 minutes at room temperature, and then place in a water bath at 100oC for 1 minute.</li>
−
                         <li>Remove the supernatant, resuspend the pellets in 10 mL of cold 0.1 M CaCl2 and allow to incubate on ice for 10 minutes.</li>
+
                         <li>Centrifuge at 12,000 rpm for 10 minutes and remove the pellet with a stick.</li>
−
                         <li>Centrifuge at 4000 rpm for 10 minutes.</li>
+
                         <li>Add 5 μL of RNAse A and incubate for 20 minutes at 37°C .</li>
−
                         <li>Remove the supernatant, resuspend the pellet in 2 mL of CaCl2 0.1M + 15% glycerol solution and allow to incubate on ice for 10 min.</li>
+
                         <li>Add 75 μL of sodium acetate 3M pH 5.2 and 250 μL of isopropanol and incubate for 10 minutes at room temperature.</li>
−
                         <li>Prepare 200 μl aliquots and store at -80 °C.</li>
+
                         <li>Centrifuge at 12,400 rpm for 10 minutes and discard the supernatant.</li>
 +
                         <li>Wash the pellet twice with 750 μL of 70% ethanol to eliminate salts.</li>
 +
                         <li>Resuspend the pellet in 150 μL of water for injections.</li>
 
                     </ol>
 
                     </ol>
 
                 </div>
 
                 </div>

Revision as of 23:11, 27 October 2017

IGEM_TECCEM

Experiments

Protocols

Preparation of chemocompetent cells

    Materials

  • LB Medium
  • CaCl2 0.1 M
  • CaCl2 0.1M + 15% glycerol
  • Desired bacterial strain

    Steps

  1. Inoculate an isolated colony of the desired bacterial strain in a sterile tube containing 10 mL of LB medium and incubate overnight at 37°C and 260 rpm.
  2. Inoculate 100 mL of LB broth with 1 mL of the previous culture (1:100 proportion).
  3. Incubate for 3 hours at 37 °C and 260 rpm until it reaches a 0.6 O.D.
  4. Place on ice for 10 minutes.
  5. Divide the culture in sterile Falcon tubes and centrifuge at 5000 rpm for 5 minutes.
  6. Remove the supernatant, resuspend the pellets in 10 mL of cold 0.1 M CaCl2 and incubate on ice for 10 minutes.
  7. Centrifuge at 4000 rpm for 10 minutes.
  8. Remove the supernatant, resuspend the pellet in 2 mL of CaCl2 0.1M + 15% glycerol solution and incubate on ice for 10 minutes.
  9. Prepare 200 μl aliquots and store at -80 °C.

Chemocompetent cell transformation

    Materials

  • Chemocompetent cells
  • Plasmid DNA
  • LB or SOC medium

    Previous Steps

  • Prepare a water bath at 42°C.

    Steps

  1. Thaw a tube of competent cells on ice.
  2. Add 5-10 μL of DNA (concentration between 1 pg/mL- 100 ng) to 125μL the competent cells.
  3. Incubate the mixture in ice for 30 minutes.
  4. Place in the water bath at 42°C for 30 seconds and immediately incubate on ice for 5 minutes.
  5. Add 950 μL with SOC or LB medium under sterile conditions.
  6. Incubate at 37°C for 60 minutes at 250 rpm.
  7. Centrifuge at 5000 rpm for 2 minutes to obtain a pellet.
  8. Discard 800 μL from the supernatant and resuspend the pellet in the remaining 200 μL.
  9. Spatulate the volume on LB plates with the selection antibiotic and incubate for 16 hours at 37°C.

Annealing of oligonucleotides

    Materials

  • Oligonucleotides
  • Injectable water
  • NEBuffer 2.1

    Previous Steps

  • Prepare a water bath at 95°C.

    Steps

  1. Perform the corresponding calculations for a desired concentration (μg/μL) and the volume needed to use 5 μg of each oligonucleotide.
  2. For each oligonucleotide, make a mix with 1X NEBuffer 2.1 for a total volume of 20 μl with the following materials:
    • Injectable water
    • NEBuffer 2.1
    • Sense oligonucleotide
    • Antisense oligonucleotide
  3. Incubate the mixture at 95°C for 5 minutes on the water bath.
  4. Leave in the water bath to cool down until room temperature is reached.
  5. Place on ice until further use.

Plasmid digestion

    Materials

  • NEBuffer 2.1
  • Restriction enzymes
  • Injectable water

    Steps

  1. Make a Master Mix with the following:
    • 18 μL of injectable water
    • 5 μL of NEBuffer 2.1
    • 1 μL of Enzyme 1
    • 1 μL of Enzyme 2
  2. Add 6 μL of the Master Mix to 6 μL of linearized plasmid in a sterile tube.
  3. Incubate at 37° for 2 hours.
  4. Inactivate in water bath at 80°C for 20 minutes.
  5. Incubate on ice for immediate use or store at -20 oC.

Ligation

    Materials

  • Injectable water
  • T4 DNA ligase buffer (10X)
  • T4 DNA ligase
  • Aligned oligonucleotides
  • Digested linearized plasmid (25ng/μL)

    Steps

  1. Prepare a master mix (if necessary) with the following components:
    • Digested plasmid
    • Water °MB
    • T4 DNA ligase
    • T4 DNA ligase buffer
  2. Distribute the master mix among the reaction tubes and place the oligonucleotides aligned to have a final volume of 10 μL per reaction.
  3. Leave incubating at room temperature overnight and transform the next day.

Lowry Method for protein quantification

    Standard curve protocol

  1. To identify the protein concentration, quantify a BSA standard curve.
  2. Preparation of samples with known proteins for a BSA stock (1mg/ml):

    3. Table 1. Known protein concentrations with the volumes of each reactant for its preparation.

    Sample BSA (μg) BSA vol (1ug/ul) H2O (ul) C Reactant (ul) Folin Reactant (ul)
    1 0 0 100 500 50
    2 10 5 95 500 50
    3 20 10 90 500 50
    4 30 15 85 500 50
    5 40 20 80 500 50
    6 50 25 75 500 50
    7 60 30 70 500 50
    8 70 35 65 500 50
    9 80 40 60 500 50
    10 110 55 45 500 50
    11 120 60 40 500 50
  3. After the samples of each concentration are prepared, add 500 μl of solution “C” (Biuret reactant) to each one and incubate for 10 minutes at room temperature.
  4. Add 50 μl of Folin reactant to each sample and then incubate 45 minutes at room temperature.
  5. Add 150μl per sample in a 96-well plate and read absorbance.

    Protein quantification for the curve sample protocol

  1. Resuspend samples in lysis buffer RIPA (200μl).
  2. Dilute 1:20 using 10μl of sample in 190μl of milliQ water.
  3. Add 1ml of “solution C” to the diluted samples and incubate for 10 minutes at room temperature.
  4. Add 10μl of Folin reactant per sample and resuspend. Incubate 45 min at room temperature.
  5. In a 96 well plate add 150μl per sample and read absorbance at 660.

Plasmid extraction

    Materials

  • Transformed E. coli DH5a cells./li>
  • LB + CAM
  • STET Buffer
  • Lysozyme
  • RNAse A
  • 3 M Sodium acetate
  • Isopropanol
  • 70% ethanol
  • Injectable water

    Steps

  1. Seed an isolated colony of each transformed Escherichia coli strain in 10 mL of LB+CAM in a test tube and incubate for 16 hours at 37oC at 260 rpm.
  2. Centrifuge all the culture in 2 mL sterile microtubes at 13,000 rpm for 1 minute in order to retrieve the pellet.
  3. Remove the supernatant and wash the pellets without resuspending with 350μL of STET Buffer (0.1M NaCl, 10 mM TRIS-HCl pH 8, 1 mM EDTA pH 8 and Triton X-100 5%)
  4. Resuspend with 350 μL of STET Buffer and add 25μL of fresh lysozyme (2 mg/mL).
  5. Incubate for 4 minutes at room temperature, and then place in a water bath at 100oC for 1 minute.
  6. Centrifuge at 12,000 rpm for 10 minutes and remove the pellet with a stick.
  7. Add 5 μL of RNAse A and incubate for 20 minutes at 37°C .
  8. Add 75 μL of sodium acetate 3M pH 5.2 and 250 μL of isopropanol and incubate for 10 minutes at room temperature.
  9. Centrifuge at 12,400 rpm for 10 minutes and discard the supernatant.
  10. Wash the pellet twice with 750 μL of 70% ethanol to eliminate salts.
  11. Resuspend the pellet in 150 μL of water for injections.

Preparation of chemocompetent cells

    Materials

  • LB Medium
  • 01. M CaCI2
  • CaCL2 0.1M + 15% glycerol
  • Sterile Falcon tubes

    Steps

  1. Inoculate an isolated colony of an Escherichia coli strain in a tube containing 10 mL of LB medium and incubate overnight at 37°C and 260 rpm.
  2. Inoculate 100 mL of LB broth with 1 mL of the previous culture.
  3. Incubate for 3 hours at 37 °C and 260 rpm until it reaches a 0.6 O.D.
  4. Place on ice for 10 minutes.
  5. Divide the culture in 15 mL Falcon tubes and centrifuge at 5000 rpm for 5 minutes.
  6. Remove the supernatant, resuspend the pellets in 10 mL of cold 0.1 M CaCl2 and allow to incubate on ice for 10 minutes.
  7. Centrifuge at 4000 rpm for 10 minutes.
  8. Remove the supernatant, resuspend the pellet in 2 mL of CaCl2 0.1M + 15% glycerol solution and allow to incubate on ice for 10 min.
  9. Prepare 200 μl aliquots and store at -80 °C.

Preparation of chemocompetent cells

    Materials

  • LB Medium
  • 01. M CaCI2
  • CaCL2 0.1M + 15% glycerol
  • Sterile Falcon tubes

    Steps

  1. Inoculate an isolated colony of an Escherichia coli strain in a tube containing 10 mL of LB medium and incubate overnight at 37°C and 260 rpm.
  2. Inoculate 100 mL of LB broth with 1 mL of the previous culture.
  3. Incubate for 3 hours at 37 °C and 260 rpm until it reaches a 0.6 O.D.
  4. Place on ice for 10 minutes.
  5. Divide the culture in 15 mL Falcon tubes and centrifuge at 5000 rpm for 5 minutes.
  6. Remove the supernatant, resuspend the pellets in 10 mL of cold 0.1 M CaCl2 and allow to incubate on ice for 10 minutes.
  7. Centrifuge at 4000 rpm for 10 minutes.
  8. Remove the supernatant, resuspend the pellet in 2 mL of CaCl2 0.1M + 15% glycerol solution and allow to incubate on ice for 10 min.
  9. Prepare 200 μl aliquots and store at -80 °C.

Preparation of chemocompetent cells

    Materials

  • LB Medium
  • 01. M CaCI2
  • CaCL2 0.1M + 15% glycerol
  • Sterile Falcon tubes

    Steps

  1. Inoculate an isolated colony of an Escherichia coli strain in a tube containing 10 mL of LB medium and incubate overnight at 37°C and 260 rpm.
  2. Inoculate 100 mL of LB broth with 1 mL of the previous culture.
  3. Incubate for 3 hours at 37 °C and 260 rpm until it reaches a 0.6 O.D.
  4. Place on ice for 10 minutes.
  5. Divide the culture in 15 mL Falcon tubes and centrifuge at 5000 rpm for 5 minutes.
  6. Remove the supernatant, resuspend the pellets in 10 mL of cold 0.1 M CaCl2 and allow to incubate on ice for 10 minutes.
  7. Centrifuge at 4000 rpm for 10 minutes.
  8. Remove the supernatant, resuspend the pellet in 2 mL of CaCl2 0.1M + 15% glycerol solution and allow to incubate on ice for 10 min.
  9. Prepare 200 μl aliquots and store at -80 °C.

Preparation of chemocompetent cells

    Materials

  • LB Medium
  • 01. M CaCI2
  • CaCL2 0.1M + 15% glycerol
  • Sterile Falcon tubes

    Steps

  1. Inoculate an isolated colony of an Escherichia coli strain in a tube containing 10 mL of LB medium and incubate overnight at 37°C and 260 rpm.
  2. Inoculate 100 mL of LB broth with 1 mL of the previous culture.
  3. Incubate for 3 hours at 37 °C and 260 rpm until it reaches a 0.6 O.D.
  4. Place on ice for 10 minutes.
  5. Divide the culture in 15 mL Falcon tubes and centrifuge at 5000 rpm for 5 minutes.
  6. Remove the supernatant, resuspend the pellets in 10 mL of cold 0.1 M CaCl2 and allow to incubate on ice for 10 minutes.
  7. Centrifuge at 4000 rpm for 10 minutes.
  8. Remove the supernatant, resuspend the pellet in 2 mL of CaCl2 0.1M + 15% glycerol solution and allow to incubate on ice for 10 min.
  9. Prepare 200 μl aliquots and store at -80 °C.

Preparation of chemocompetent cells

    Materials

  • LB Medium
  • 01. M CaCI2
  • CaCL2 0.1M + 15% glycerol
  • Sterile Falcon tubes

    Steps

  1. Inoculate an isolated colony of an Escherichia coli strain in a tube containing 10 mL of LB medium and incubate overnight at 37°C and 260 rpm.
  2. Inoculate 100 mL of LB broth with 1 mL of the previous culture.
  3. Incubate for 3 hours at 37 °C and 260 rpm until it reaches a 0.6 O.D.
  4. Place on ice for 10 minutes.
  5. Divide the culture in 15 mL Falcon tubes and centrifuge at 5000 rpm for 5 minutes.
  6. Remove the supernatant, resuspend the pellets in 10 mL of cold 0.1 M CaCl2 and allow to incubate on ice for 10 minutes.
  7. Centrifuge at 4000 rpm for 10 minutes.
  8. Remove the supernatant, resuspend the pellet in 2 mL of CaCl2 0.1M + 15% glycerol solution and allow to incubate on ice for 10 min.
  9. Prepare 200 μl aliquots and store at -80 °C.

Experiments

Project Development

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aenean maximus, odio eu ornare bibendum, tellus lorem mattis ante, non iaculis leo lorem id justo. In placerat sapien eget ultrices venenatis. Vivamus velit augue, efficitur sit amet commodo a, tristique at purus. Aenean quam mi, mollis ac posuere id, faucibus quis velit. Nullam interdum enim nec ultrices volutpat. Proin vel mi eget lorem laoreet venenatis. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Fusce sodales porta mauris, sit amet elementum eros aliquet eu. Pellentesque sed sapien at enim sollicitudin sollicitudin vitae vel diam. Vivamus placerat aliquet enim.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aenean maximus, odio eu ornare bibendum, tellus lorem mattis ante, non iaculis leo lorem id justo. In placerat sapien eget ultrices venenatis. Vivamus velit augue, efficitur sit amet commodo a, tristique at purus. Aenean quam mi, mollis ac posuere id, faucibus quis velit. Nullam interdum enim nec ultrices volutpat. Proin vel mi eget lorem laoreet venenatis. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Fusce sodales porta mauris, sit amet elementum eros aliquet eu. Pellentesque sed sapien at enim sollicitudin sollicitudin vitae vel diam. Vivamus placerat aliquet enim.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aenean maximus, odio eu ornare bibendum, tellus lorem mattis ante, non iaculis leo lorem id justo. In placerat sapien eget ultrices venenatis. Vivamus velit augue, efficitur sit amet commodo a, tristique at purus. Aenean quam mi, mollis ac posuere id, faucibus quis velit. Nullam interdum enim nec ultrices volutpat. Proin vel mi eget lorem laoreet venenatis. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Fusce sodales porta mauris, sit amet elementum eros aliquet eu. Pellentesque sed sapien at enim sollicitudin sollicitudin vitae vel diam. Vivamus placerat aliquet enim.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aenean maximus, odio eu ornare bibendum, tellus lorem mattis ante, non iaculis leo lorem id justo. In placerat sapien eget ultrices venenatis. Vivamus velit augue, efficitur sit amet commodo a, tristique at purus. Aenean quam mi, mollis ac posuere id, faucibus quis velit. Nullam interdum enim nec ultrices volutpat. Proin vel mi eget lorem laoreet venenatis. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Fusce sodales porta mauris, sit amet elementum eros aliquet eu. Pellentesque sed sapien at enim sollicitudin sollicitudin vitae vel diam. Vivamus placerat aliquet enim.

IGEM_TECCEM