Difference between revisions of "Team:Aalto-Helsinki/Concept"

The Concept

We wanted to create a concept that gathers together the whole project we have been working with. The purpose of the concept is to have a way to communicate with people about possibilities of synthetic biology. Skin care and acne turned out to be really good way to do that, because it is part of almost everyone’s daily life in a way or another and with it it was easy to build a bridge between science and people. The concept itself is simple and easy to understand. Our aim was to create purifying skin care product for people suffering from acne. Our primary of importance was to create non-toxic and safe product that doesn’t cause any environmental impacts, is easy to produce and simple to use.

Porifi - Purify your pores from acne bacteria

Our application for antimicrobial dermcidin is exfoliating skin care product made out of cellulose hydrogel. Important part of taking care of acne is to remove and exfoliate dead skin gently and purify the skin. Cellulose hydrogel is natural and non-toxic substance that could be ideal for store dermcidin in. By changing content and amounts of water and CMC it was possible to have different viscosities and feelings of hydrogel. By testing different kind of compositions we ended up using one with..

Picture on the left: Michal and Maisa making the hydrogel
Picture on the right: Hydrogel sample ready for density measurement

For exfoliating beads ideal material would be cellulose that dissolves in water as time passes but not too fast when product is stored and still under use. Dermcidin could also be bonded with cellulose based bead. In our product trial we used grinded peach stones.

Picture on the left: Filters for the grinding machine
Picture on right: Andreas Lindberg helping us with the grinding machine

Smooth as a peach - The product

From the survey and meetings with professionals and people suffering with acne we got valuable information what kind of products people in general are willing to use and what kind of effect they are looking for form the product. We wanted to make our product application as simple and user friendly as possible. Instead of making purifying mask that user should wear 10 to 20 minutes we decided to make easy exfoliating gel. User only needs add it on skin, rub it gently on the skin and rinse away.

The efficiency of the product is based on both antimicrobial dermcidin component which could increase the natural dermcidin balance on the skin and exfoliating the dead skin by rubbing peach stone beads gently on the skin.

Hydrogel with exfoliant

Cosmetics is one of the major sources for microplastics that end up in the environment. We were critical of microbeads which many cosmetic companies use as exfoliating agents in their products. Microbeads are tiny plastic particles which end up in the oceans, as they cannot be filtered from our waste waters. After, through plankton, they start to accumulate in fish and fish-eating birds [2]. In the beginning of 2017 microplastics were already detectable from table salt. We used natural beads made of peach pits. We grinded them to achieve the beads of different particle sizes: coarse (heavy), medium (mix) and fine. Then, we added them to hydrogel samples to get different compositions. The viscosity also impacts the sedimentation rate of exfoliating beads suspended in the hydrogel.

Exfoliant sedimentation and user perception tests

First, we compared all samples by sensing and realized that the fine exfoliant felt too delicate in all prepared hydrogels. On the other hand, the coarse beads were quite big and had sharp edges. The medium exfoliant seemed to nicely blend with hydrogels and provide good exfoliating effect.

After testing based on perception, we left the samples for several days to see what would happen with the exfoliants. It turned out that the most viscous solutions, 7% Cekol 2000 and 3% Cekol 50000 W, remained stable and kept the beads uniformly distributed (#picture). However, we also noticed the degradation of cellulose chains in the hydrogels due to microorganisms growth, which resulted in severe viscosity reduction.

Hydrogel degradation

Although CMC has good stability towards degradation– enzymes and oxidants may still degrade it. Enzymes produced by microorganisms, may degrade the cellulose chain, and thus, cause serious, irreversible viscosity decreases. [1]

It happened to our samples while keeping them in room temperature and being exposed to light. We were warned about the possible spoilage in the talk with one expert, but despite that, we had neither carefully sterilized the peach pits nor added any preservative before. In result, after one week, two samples (1% and 2% Cekol 50000 W with the fine exfoliant) completely turned into cloudy liquids. Some other were affected by mold and the degradation process started too. After another week, the cellulose chains in most of other samples were either entirely or almost entirely degraded (#picture).

Pic: a,b) Degraded 3% Cekol 50000 W with medium exfoliant - cloudy liquid on top and severely c) Mold in 7% Cekol 2000 with heavy exfoliant

An efficient way to stop enzymatic attacks is thus to prevent growth of microorganisms. This can be done by adding preservative. The CMC manufacturer suggest the following preservatives for food, cosmetic and pharmaceutical uses:
- Sodium benzoate
- Sorbates (Na and K salts)
- Sodium propionate
- Methyl parahydroxybenzoate
We also searched for other preservatives which are commonly used in cosmetics. The attachment presents the list of several other preservatives with brief descriptions.

Preservatives

Due to problem with microorganism growth in the hydrogels, we decided to check the effect of adding a preservative on the solution stability. We picked the benzyl alcohol for a trial, because it is used in a wide variety of cosmetic formulations [3]. According to Cosmetic Ingredient Review, it is safe to use in cosmetic products at concentrations of up to 5%. However, in the European Union, benzyl alcohol is allowed at maximum concentration of 1% in ready for use preparation [4].

Although benzyl alcohol can be considered as a natural ingredient as many plants, fruits, and teas have it as a component. On the other hand, the cheaper synthetic version is usually used in products, which is produced by mixing benzyl chloride with sodium hydroxide. Other ‘natural’ alternatives are also available and could be also considered in the future.

Benzyl alcohol is a colorless liquid and has a mild, pleasant aromatic scent, so it is used not only as a preservative but also as a fragrance ingredient. We assumed that our cosmetic product should be odorless or with subtle aroma. However, during testing benzyl alcohol as the preservative we got annoyed with its perfumed smell. After mixing the components, the smell was not so irritating anymore, but it is important to consider the influence of preservatives and other additives on the finished product aesthetics such as odor, color and viscosity.

Moreover, the interaction of benzyl alcohol or other preservatives with the dermcidin should be investigated in the future to provide the anti-acne features of our product. The testings we made with benzyl alcohol turned out to be promising and within one week no microorganism growth wasn’t found. In the future more test are required and we were also taking into account the possible effect of sterilization of the beads and order to avoid contamination.

Sterilized peach beads.

Package

In package design we had several potential material candidates like biodegradable wood based plastic PLL, paper and wood. We decided to go with a wooden packages because we had an idea of wood based product packaged inside wooden package. With wooden package we also represented Finnish nature which was an inspiration in whole design process. Package is made out of curly birch wood, which has beautiful structure and outlook naturally. Product name is laser engraved on top of the package and ingredient information can be engraved on bottom of the package. In actual production process wooden package is most probably too expensive, but now we wanted to focus on a show piece, an idea of no beautiful package that can be used after the product has run out. With wooden package we will also get more attention. In future the package could be PLL tube or coated paper tube which is easy to recycle or burn.

Future work

We had two possible path to proceed with the application prototype in the time limits of iGEM competition. We had a possibility to make looks like product sample, with the correct materials and compositions or works like prototype with correct function. We decided to to proceed with looks like prototype in order to have a understandable sample in the end to show and in able to create a visual concept around or research and product. Next steps with the product development would be to bring dermcidin and the hydrogel together and testing the activity in final product and how it works on skin contact.