Team:IISc-Bangalore/Hardware/Documentation
| Sponsors | |||||
|---|---|---|---|---|---|
 |
 |
 |
|||
 |
 |
||||
| Contact | |||||
|---|---|---|---|---|---|
|
|
|
|||
Build Your Own GCODe Mini
Construction Manual
Here's the construction manual for the GCODe Mini. It contains the parts list, assembly instructions and device setup instructions. It also has the software installation instructions.
GCODe Mini Construction Manual.pdf
Resources
Laser Cutting and PCB fabrication Resources
Here are the source files for the laser cutting and PCB fabrication. For laser cutting, the material we used is a standard opaque 4mm acrylic sheet. You should submit the .dwg file in the laser-cutting-source-files folder for laser cutting. The Gerber files for PCB fabrication are in GCODeMini_PCB_V3.zip inside the below zip file. The schematics are given as .pdf files.
IISc-Bangalore--GCODe--Mini--FabFiles.zip
Software Resources
Here's the entire source code for the Mini. Once you extract it, you will get a folder named 'Code'. This is referred to as the Code folder in the manual.
IISc-Bangalore--GCODe--Mini--Code.zip
User Manual
Here's the User manual for the GCODe Mini. It details out the user instructions for an assembled GCODe Mini on a laptop with the GCODe Mini software and all the required dependencies installed. For installation instructions, please refer the last part of the Construction manual.
Build Your Own GCODe Pro
Construction Manual
Here's the construction manual for the GCODe Pro. It contains the parts list, assembly instructions and device setup instructions. It also has the software installation instructions.
Resources
Laser Cutting and PCB fabrication Resources
Here are the source files for the laser cutting and PCB fabrication. For laser cutting, the material we used is a standard opaque 4mm acrylic sheet. You should submit the .dwg file in the laser-cutting-source-files folder for laser cutting. The Gerber files for PCB fabrication are in GCODe_Pro_PCB_Gerbers.zip inside the below zip file. The schematics are given as .pdf files.
Software Resources
Here's the entire source code for the Mini. Once you extract it, you will get a folder named 'Code'. This is referred to as the Code folder in the manual.
