Hardware Project

This year’s hardware project dealt with creating a lightbox for optogenetic experiments, which is inexpensive to build and easy to use. Lightboxes are an important part of every lab that deals with optogenetics, due to the fact that experiments in this field require light of specific wavelengths and are very easily disrupted by background lighting. This would normally mean that the experiment would need to be conducted in a completely dark lab, which can be difficult to achieve and may render the room practically useless for other experiments. A lightbox provides a compact way of creating a suitable environment. Unfortunately, buying such a box can be expensive, as it needs to be custom-built. We wanted to create a way of supplying future iGEM teams or other research groups with a relatively easy way of constructing their own box. Since we had planned on using optogenetics in parts of our overall project, the lightbox we built also came in handy for us.

Construction of the box

Building our box requires a small amount of work with electronics, as well as a bit of programming. Below we provide a sketch of the set-up, a brief description of the overall box and then an instruction manual to building the box yourself.

Our lightbox consists of a 3D-printed casing, a circuit board with LEDs, a slot for inserting your samples, and a compartment for electronics and wiring. Other lightboxes we looked at came in two parts: a basin for the sample and a lid with LEDs. Our tray mechanism enables construction of a more compact box and relieves stress on wires.