Latest revision as of 19:52, 15 December 2017

Production

A major requisite of cyano-cell factories, according to expert's opinion, is that they must be able to produce in a stable fashion under industrial conditions. A recent quantitative analysis of the various ways to convert the energy of photons to chemical bonds has revealed that the direct utilization of sunlight is the most efficient [1]. This however means that cells will be exposed to diurnal regimes in which they will inevitably be exposed to periods of darkness. Our goal here is to achieve the first photoautotrophic cell factories that are able to stably produce fumarate around the clock.

Produce

Overview

Synechocystis does not naturally produce fumarate. However, model guided engineering found that removing a single gene within Synechocystis leads to a stable cell factory that produces fumarate as it grows during the day. Nevertheless, at night our cells do not produce fumarate, since at night, they don't grow. To overcome this challenge, we have taken a systems biology approach which interweaves theory, modeling, and experimentation to implement stable nighttime production of fumarate. We theorized that we can redirect the nighttime flux towards fumarate production by removing a competing pathway via knockout of the zwf gene. Additionally, we also took inspiration from nature and speculated that the incorporation of the glyoxylate shunt would further increase our nighttime production of fumarate. Our models corroborate these predictions, however, they also suggest that the stability of the glyoxylate shunt is sensitive to the timing of when the shunt is turned on (i.e. expressed). We therefore took a robust approach to incorporate the glyoxylate shunt enzymes under ideal expression conditions.

Highlights

Engineered a Δ fumC Δ zwf Synechocystis strain, that uses different fumarate production strategies during day and night.
Developed a method to make fully segregated libraries in polyploid organisms
Created the first fully segregated library representing the entire genome (99.9% confidence) of Synechocystis upstream of the glyoxylate shunt genes. This library is now ready to be tested to further increase nighttime fumarate production.
Stable production of fumarate directly from CO ₂ around the clock Qp _night of 12.7 µM grDW ^-1 hour ^-1 Qp _day of 52.0 µM grDW ^-1 hour ^-1

▶ Industrial conditions

Why produce during day and night?

Our cyano-cell factory must be able to stably grow and produce under industrial conditions. At the industrial scale, Synechocystis and other cyanobacteria are often grown in large outdoor ponds or in greenhouses [2], where natural solar radiation is the primary source of light. This means that the cultures are subject to an oscillating light-dark cycle. Therefore, we aim to make a cyanobacterial cell factory that is able to produce fumarate in a stable fashion during, not only the day, but also the night.
We mimicked industrial conditions in the lab by tailoring commercially available photobioreactors (MC1000-OD, PSI, Czech Republic) to be capable of simulating dynamic white light regimes. This involved developing new algorithms to incorporate the on-line measurements (e.g. OD ₇₃₀ ) with the desired oscillatory light intensity patterns, which then had to be coded into the in-house software package that controls the photobioreactors. These relatively complex sinusoidal functions that we deduced may then also be optionally coupled with algorithms that generate stochasticity resembling the one cells encounter in production scenarios. In combination, these new developments allow us to use lab-scale photobioreactors to mimic industrial settings operating at high cell densities in which cells perceive fluctuating light intensities on top of the sinusoidal light regimes inherent to day-night cycles. This effort, albeit time consuming and with little application of synthetic biology methods, was crucial to ensure the connectivity of our metabolic engineering strategies to the "real-world" beyond the academic laboratory.

Why is stability an issue?

Stable production at the industrial scale is a challenge of biotechnology. Production rates are often not sustained and will diminish throughout the cultivation. Furthermore, maximal production rates cannot be reached again by the same culture, even with the addition of fresh medium. This is due to the phenomena of strain instability [3].
This generalized phenomenon can be easily understood in the light of evolution theory, Darwinian selection and population dynamics. By introducing heterologous production pathways, cellular resources are forcibly diverted towards an extraneous product, and away from anabolic processes (i.e. growth). Cells which then lose the ability to produce the product are able to grow faster and eventually take over the population based on simple Darwinian selection, resulting in the irreversible loss of production [4].
Promising solutions to strain instability can involve the alignment of production of the desired compound with the fitness of the cell, i.e. the cell must produce in order to grow. One method for stable production is to knock-out genes whose proteins recycle anabolic byproducts [5].

▶ Stable daytime production - Δ fumC

Introduction

Experts in biotechnology have indicated to us at the onset of this project that the process unpredictability that emerges from the instability of engineered strains in production settings is one of the major technical hurdles of the field [6]. This occurs because most commonly used metabolic engineering approaches make products in direct competition with biomass formation, which imposes high fitness burdens on production strains. This ultimately leads to a rapid appearance of suppressor mutations, for instance in the form of insertions or deletions, that impair the culture's ability to form product [7][8]. So called growth-coupled production (i.e. obligate coupling of the synthesis of specific target products with bacterial growth) can help stabilize production traits. When the formation of product and biomass are aligned, non-producing mutants that emerge spontaneously are outcompeted by the fitter producing strains according to Darwinian selection principles [9]. The theoretical framework behind the engineering of growth-coupled strategies has thus far been underpinned by the same principle - linking a product-forming pathway to the capacity of the cell to regenerate energy and/or redox co-factors. This principle has been proposed for photoautotrophs but never successfully implemented in the laboratory [10]. The cause behind this has to do with the plasticity conferred by all the alternative electron flows surrounding the photosystems I and II, which makes it very difficult to achieve the desired strict coupling. However, recent advancements in the designing of metabolic engineering growth-coupled production strategies may bring the solution to this hurdle.

How to stably produce fumarate in Synechocystis during the day?

The 2015 Amsterdam iGEM team has pioneered the development of a method to design growth-coupled strategies based on a completely different principle. Instead of using energy or redox regeneration, this is now based on the direct stoichiometric coupling of pathways uniquely responsible for the formation of biomass precursors to the production of target compounds. This is achieved through the deletion of the native metabolic route(s) that cells have to reintroduce side-products of anabolism, leading to their accumulation, and hence, ensuring their growth-coupled production.
This concept has been developed into an algorithm to 'Find Reactions Usable In Tapping Side-products' - FRUITS. By analyzing existing genome-scale metabolic models, it identifies anabolic side-products that can be coupled to cell growth by the deletion of their re-utilization pathway(s). This pipeline is freely-available at https://gitlab.com/mmp-uva/fruits.git . When applied to Synechocystis growing under photoautotrophic conditions, FRUITS predicts that nine compounds can be coupled to growth, of which one is fumarate.
Prediction is that during growth, so in the light (or during the day in an industrial setting), fumarate is produced as a by-product of specific anabolic reactions within purine and urea metabolism and then re-assimilated through the TCA cycle via the activity of fumC (fumarase). If the only fumarate assimilation pathway present is removed, by the engineering of a fumC deletion strain, FRUITS predicts that fumarate will be accumulated (fig.2.1). While the precise localization of fumarate is not important in silico, in our module on transport we have clarified this in reality as, according to experts engaged in our project, it is very important for the economic feasibility of the technology here developed. The predictions of FRUITS regarding fumarate have been experimentally tested, leading to the first photoautotrophic cell factory that is able to stably produce fumarate directly from CO ₂ .

**Figure 2.1** Schematic representation of fumarate metabolism in *Synechocystis* sp. PCC6803. (a) A deletion of *fumC* gene (red X) in the TCA cycle blocks fumarate re-assimilation, thereby enabling its accumulation. (b) PCR confirmation of the Δ *fumC* mutant. With the primers indicated (black arrows), a clean knockout of *fumC* gives a single DNA band ~ 1.2 kb, while for wild type (WT) is ~ 2.5 kb. Abbreviations: RuBP, Ribulose-1,5-bisphosphate; G3P, Glyceraldehyde 3-phosphate.

Results and discussion

Extracellular fumarate production by a markerless fumC deletion Synechocystis strain

We used a clean Synechocystis fumC deletion mutant ( Δ fumC ) to experimentally test its capacity to produce fumarate, using the wild type Synechocystis as a control. Under constant light conditions, Synechocystis wild type and the Δ fumC strain grew similarly during the exponential growth phase. Wild type reached a slightly higher optical density after entering stationary growth phase (fig.2.2A). Not surprisingly, there was no extracellular fumarate production in Synechocystis wild type. In contrast, the Δ fumC strain excreted significant amounts (> 1 mM) of fumarate throughout the cultivation (fig.2.2B). These results very nicely match the the in silico predictions that indicated that disrupting fumC would culminate in fumarate accumulation.

**Figure 2.2** Cell growth and extracellular fumarate production in different Synechocystis strains. (a) Cell growth of both wild type and ΔfumC in Multi-Cultivator under constant light illumination for over 200 hours. (b) Extracellular fumarate production for both strains. Error bars indicate the standard deviations.

While undoubtedly promising (!) these initial growth experiments do not assure that biomass and fumarate formation are strictly aligned. The strong stoichiometric coupling which we are striving to engineer implies that at different growth rates one would expect a linearly proportional change in the biomass specific production rate. The latter remained to be tested with this initial set of experiments alone.

Growth-coupled production of fumarate in Δ fumC strain

We tested whether fumarate production and growth rate are aligned in the Δ fumC strain, by performing 12 independent photonfluxostat at different, yet constant, growth rates [6]. This was achieved by dosing the biomass specific light flux to intensities ranging from 30 to 100 μmol photons m ^-2 s ^-1 OD ^-1 . For each cultivation maintained at a different growth rate, samples were taken at different sampling times to quantify extracellular fumarate concentration. Fumarate productivities were subsequently calculated and plotted against the respective growth rate (fig. 3.A). The results obtained indicate that fumarate productivity is indeed proportional to cell growth rate, implying that both physiological traits are strongly coupled as here desired. Furthermore, we compared the linear fit between fumarate productivity and growth rate based on our experiment, with the outcome of the simulations using FBA on the metabolic network reconstruction of Synechocystis . It is important to highlight that we did not in anyway tweak the modeling parameters, which were taken directly from the original report [11]. Still, both fits match strikingly well, corroborating that indeed the hypothesis that fumarate production and growth rate are aligned in the Δ fumC strain seems to hold up to scrutiny.

We also calculated the carbon partitioning towards fumarate in the Δ fumC strain during the multiple cultivations carried out (Fig. 3B). We did not see any significant changes in carbon partitioning irrespective of the biomass specific light flux. This indicates that irrespective of the growth rate, as long as cells are illuminated, the fumarate yield on biomass is constant. This result also support theoretical predictions, which state that fumarate production is only affected by environmental conditions to the extent that the latter affect growth. In other words, that fumarate production is stoichiometrically and obligatorily coupled to growth.

**Figure 2.3** Strict relationship between growth and product formation in the Δ fumC strain. (a) A linear relationship between growth rate and biomass specific fumarate productivity. Each point represents a single observation, and solid line is a linear fit of all experimental data points. Dash line is based on in silico FBA simulations of the genome-scale metabolic model of Synechocystis using biomass maximization as the objective function. (b) Carbon partitioning of fumarate production on biomass at different light regimes. Error bars indicate the standard deviation of carbon partitioning calculated at times throughout the cultivation (n>3).

Stability of fumarate production by the Δ fumC strain

While we considered the body of evidence supporting fumarate growth-coupled production in the Δ fumC strain to be very convincing, whether this does indeed improve the phenotypic stability of the production trait remained to be tested. As explained above, the root of the instability comes from Darwinian selection for fitter strains. When using classical metabolic engineering strategies, the fitter strains are the non-producing ones; When using our new growth-coupled strategy, it should be the producing ones. Conditions in which cells are under a strong selection pressure for fastest growth and in which the propagation bottlenecks are smallest, are predicted to result in the fastest drops in productivity [12]. Such conditions, while maintaining the total population size relatively constant, are best met under turbidostat cultivation [13], and so these provide the harshest test ground to assess the stability of production strains.
We cultivated the Δ fumC strain under turbidostat regimes operated at non-light limiting conditions at maximal growth rate extending for over 3 weeks. During this period we did not observe any significant changes in production rate (fig.2.4A) - a true testament to the stability of our daytime fumarate producing strain. As a control, we compared how a Synechocystis strain that was engineered using classical approaches to produce lactate [14] fairs under the same conditions. Lactate production in this strain was achieved by the heterologous expression of lactate dehydrogenase from Lactococcus lactis, yielding an initial carbon partitioning as the one here reported for fumarate. As theory would dictate, lactate production was lost within 5 to 10 days for this strain (fig.2.4B). This result reinforces the stringency with which this regimes selects for fitter cells, which when using our engineering method, means the producing ones.

**Figure 2.4** Production stability of fumarate (a) and lactate (b) during prolonged turbidostat cultivation under continuous light.For fumarate, productivity in corresponding time points was normalized based on the average productivity at the first time point (set to be 100%). The error bars indicate the standard deviations of 4 replicates. For lactate, each symbol represents a single observation normalized by its first time point (set to be 100%). The initial burden of deviating carbon from biomass formation for both products is similar, highlighting the success of the engineering strategy deployed for fumarate.

Conclusion

The model guided metabolic engineering strategy to achieve stable growth coupled production of fumarate during the day (i.e. while cells are growing) in the photosynthetic cyanobacterium Synechocystis has been successfully implemented and validated. We provide evidence that (i) the Δ fumC strain produces fumarate; (ii) does so in a growth-coupled fashion; and (iii) that this approach completely stabilizes the production trait. This is the first report of fumarate production directly from CO ₂ using an engineered cyanobacterium. Thus far, albeit stable, this production is limited to the day since that is when cells grow. Further modeling and genetic engineering in this module of the project, will exploit how this can also be done during the night or exploiting the incorporation of pathways that are not native to Synechocystis .

Methods

Strains

The Synechocystis Δ fumC strain was obtained from the collection of the Molecular Microbial Physiology Group from the University of Amsterdam. This strain has the fumC gene which encodes for the TCA cycle enzyme fumarase deleted from its genome. This is a fully segregated strain that has been made clean of all antibiotic resistance markers using the markerless method we adopted in our project.

Batch and photonfluxostat cultivation

The batch cultivation was performed in Multi-Cultivator (MC1000-OD, PSI, Czech Republic), with light intensity controlled through a "cool-white" LED panel (PSI, CZ). BG11 supplied with 10 mM TES-NaOH (pH = 8.0) was used for Synechocystis cultivation at 30 ℃ and bubbled by a mix (v/v) of 99 % N ₂ and 1% CO ₂ at a flow rate of ~150 ml min ^-1 . The pre-cultures (OD ₇₃₀ ≈ 2) from the shake flask were used for inoculation in the Multi-Cultivator, with an initial OD ₇₃₀ of 0.05 and working volume of 60 ml. Continuous light was given at fixed light intensity of 30 μmol photons m ^-2 s ^-1 after inoculation, and 120 μmol photons m ^-2 s ^-1 when OD ₇₃₀ reached 0.5. Samples were taken daily, where OD was recorded and supernatant was prepared. Regarding the photonfluxostats[16], all the cultivation conditions are the same as for batch cultivation except for the light intensity settings. Light intensity was 30 μmol photons m ^-2 s ^-1 after inoculation. When OD ₇₂₀ (measured through the build-in OD sensor of the Multi-Cultivator at 720 nm calibrated to the external spectrophotometer at 730 nm) was above 0.6, light intensity was automatically adjusted every 5 min to ensure light intensity per OD ₇₂₀ was constant. This light regime was maintained until maximum capacity of the LED panel was reached. Under photonfluxostat mode, a "steady-state" would be achieved and constant growth rate can be reliably obtained. Samples were taken every a few hours during this phase, where OD ₇₃₀ was measured and fumarate concentration was quantified.

Turbidostat cultivation

We studied the genetic stability of our strains in populations maintained under turbidostat model [13]. In this continuous cultivation method, microbial populations are kept at a fixed biomass density by diluting the culture with fresh medium at the same rate as the populations grows. This feedback loop applies a strong selection pressure on cells to grow at the maximal specific growth rate. The turbidostat setup used in this experiment is based on a modified Multi-Cultivator, with additional pumps (Reglo ICC, ISMATEC, Germany) transferring fresh medium to the cultures, and subsequently, to a waste container (i.e. as in a classical chemostat). The "pycultivator" software package that controls the Multi-Cultivator and adjunct hardware, additionally sets the pumps to dilute the cultures if the selected OD ₇₂₀ threshold is reached. Cells from pre-cultures in shake flasks were inoculated at OD ₇₂₀ ~0.05 in 4 independent cylindrical vessels of the Multi-Cultivator, using the same conditions as specified before, except for the incident light intensity, which was fixed at 100 μmol photons m ^-2 s ^-1 . The OD ₇₂₀ was recorded every 5 min. When the threshold of OD ₇₂₀ > 0.6 was reached, cultures were diluted by 8% (v/v) with fresh BG11. Strain stability was assessed by monitoring growth rate and fumarate and lactate production in time. Growth rate was calculated by fitting a linear function through the natural logarithm of the OD ₇₂₀ during each cell "growth-dilution" cycle. Samples for exometabolite production were collected periodically throughout the cultivation period. The variation in production rate, expressed in percentage, was calculated relative to the one observed at the beginning of the cultivation experiment.

Fumarate and lactate quantification

Culture samples were harvested at selected time points. To determine the concentration of exometabolites, at least 500 μL aliquot was taken. Cells were removed through centrifugation for 10 min at 15,000 rpm at 4 ℃. The resulting supernatant was then filtered (Sartorius Stedin Biotech, minisart SRP 4, 0.22 μm) for sample preparation. Exometabolite concentrations were measured by HPLC-UV/VIS (LC-20AT, Prominence, Shimadzu), with ion exclusion Rezex ROA-Organic Acid column (250x4.6 mm; Phenomenex) and UV detector (SPD-20A, Prominence, Shimadzu) at 210 nm wavelength. 10 μL of the HPLC samples were injected through an autosampler (SIL-20AC, Prominence, Shimadzu), with 5 mMH ₂ SO ₄ as eluent at a flow rate of 0.15 ml min ^-1 and column temperature of 45 ℃. The retention time for fumarate and lactate are 18.26 min and 16.20, respectively on the system used.

▶ Stable nighttime production - Δ fumC Δ zwf

Introduction

How to stably produce fumarate during the night?

Experts in the field of biotechnology explained to us that production with photoautotrophs is to the best of their knowledge not been explored. After all the claim to fame of these organisms is precisely their ability to use the energy of light. Nonetheless, a significant part of the energy from light captured during the day is used by these organisms to make storage compounds such as glycogen [24] or poly-hydroxybutyrate[25]. If we explore the production possibilities of fumarate in Synechocystis during the night, we face a challenge. As Synechocystis does not grow without sunlight, the growth coupled production strategy of fumarate is not possible during the night. Thus, we expect no growth coupled fumarate production. But is there another strategy in which we can exploit the night to produce fumarate?

In order to survive the night, Synechocystis produces energy by catabolizing its glycogen storage [24]. The TCA cycle is often associated with this process as it provides the electron carriers for ATP production via respiration. As fumarate is an intermediate metabolite in the TCA cycle, increasing the carbon flux through the TCA cycle could be exploited to increase fumarate production during the night.

An unexpected challenge, probably quite unique to photoautotrophs, that emerged is that flux measurements experimentally determined that Synechocystis does not use the TCA cycle at night as anticipated, but as rather evolved to prefer the Pentose Phosphate Pathway (PPP) [15]. During the night, the PPP can also act as an additional electron carrier producing pathway, which is preferred over the TCA cycle in Synechocystis for this function [15], potentially because it does not release so much of the energy already stored in the carbon bonds. End-product of PPP will be a pentose (5 carbon skeleton), while the TCA cycle will produce CO ₂ which was so costly to fix in the first place!

To increase the flux through the TCA cycle, we took a modeling approach, which predicted that we could increase flux towards the TCA cycle by deletion of the zwf gene, which codes for Glucose-6-phosphate 1-dehydrogenase. It catalyzes the first step in the PPP. By removing the PPP, our model predicts that the cell is then forced to have a higher flux towards the TCA cycle to reconcile the loss in reducing equivalent production. When combined with the fumC deletion, this will lead to an increased production of fumarate, which we have tested (and confirmed) in a photonfluxostat experiment.

Results and Discussion

Extracellular fumarate production by a markerless Synechocystis Δ fumC Δ zwf strain

We constructed the Δ zwf and Δ fumC Δ zwf knockouts and confirmed complete absence of antibiotic resistant cassettes for both strains (fig.2.5). On our quest to a diurnal production system, we have characterised both strains in a batch experiment and compared the production capacity of these strain, during the day and night phases. We earlier showed that the Δ fumC strain is able to produce fumarate under continuous light. Therefore, we expect the Δ fumC to be able to produce fumarate during the day in our diurnal regime as well. From our systems biology approach, we predicted that the Δ fumC Δ zwf strain is able to produce fumarate in a similar fashion as the Δ fumC during the day, also using growth coupled production. On top of the strictly growth-coupled production, our model also predicted that the Δ fumC Δ zwf strain produces fumarate during the night from the flux that is redirected from the PPP towards the TCA. This implies that the Δ fumC Δ zwf should have an increased total daily fumarate production over the course of 24 hours.

**Figure 2.5** PCR confirmation of gene deletions on Wild Type and Δ fumC background of Δ zwf and Δ fumC Δ zwf. A clean knockout gives a single DNA band at 2202 bp, while for wild type (WT) this is 3.430 bp. As a positive control (C+) the knockout plasmid was used and as negative control (C-) the mazF plasmid was used. Most importantly the Wild Type (WT) gene is not present anymore in our strains, which implies that the strains are fully segregated knock outs.

Daytime production

From the diurnal batch culture, we were able to calculate the daytime production for the two strains (N=4 for both strains). After 72 hours at an OD ₇₂₀ of ~2, which is realistic for industrial settings, both the Δ fumC and the Δ fumC Δ zwf strain produce fumarate with a maximum Qp _day of 58.7 µM grDW ^-1 hour ^-1 for the Δ fumC and 52.0 µM grDW ^-1 hour ^-1 for the Δ fumC Δ zwf over the course of one day fig.2.6. This confirms that (i) the Δ fumC is able to produce during the day, when mimicking industrial settings with a diurnal and sinusoidal light regime, and (ii) the Δ fumC Δ zwf produces a similar amount of fumarate during the day as the Δ fumC . As expected both the WT and the Δ zwf strain did not produce fumarate during the day.

**Figure 2.6** Qp _day of the different strains. After 72h. This experiment has been carried out with similar results 4 times independently for Δ *fumC* Δ *zwf* and 5 times for the Δ *fumC* . Δ *fumC* Δ *zwf* has a higher Qp _day than the Δ *fumC* . *WT and Δ *zwf* do not produce fumarate during the night.*

Night time production in conditions mimicking industrial settings

Based on our modeling results we expected the Δ fumC Δ zwf to have increased fumarate production during the night compared to the Δ fumC strain. We can see that already after 64 hours, the Δ fumC Δ zwf has a Qp _night of 12.5 µM grDW ^-1 hour ^-1 , while the Δ fumC has a Qp _night of 5.2 µM grDW ^-1 hour ^-1 (fig.2.7). This beautifully confirms the predicted results obtained from modeling.

It must be noted however, that nighttime fumarate production can be perceived as finite since it relies on the glycogen storages that were built up during the day. The reported QP is calculated by looking at the night as whole. Although the comparisons between the strains are still valid, it is important to understand that QP is not necessarily constant throughout the night as it depends on the dynamics of glycogen catabolism.

The Δ fumC strain produced fumarate during the night, and albeit not much, still it directly contradicts our model predictions. Even if we do not correct for OD, there is an increase in fumarate concentration during the night (fig. 2.8), further supporting that the Δ fumC indeed (unexpectedly) produces fumarate during the night. This can be easily explained by one of the pitfalls of constraint based analysis techniques such as the ones we used - they assume optimality. The dynamic flux balance analysis predicts that using the PPP at night is preferred over the TCA, and hence, the corresponding flux distributions deduced do not lead to fumarate production. The thing is that Life does not always have to conform to the optimality principles that underlie the modeling, as there might be other factors which are not captured in the model at play. For instance, one could speculate that cells adopt an anticipatory behavior during the night and want to make some amino acids that are derived from TCA intermediates. That could explain why a residual flux towards the TCA could still be beneficial. One thing remains clear, though - deletion of the zwf gene combined with the fumC drastically increases fumarate production in the dark - nearly 3 fold! This also opens up possibilities for the production of other TCA cycle intermediates at night with Synechocystis

**Figure 2.7** Qp _night of the two strains after 64h. This experiment has been carried out with similar results 4 times independently for Δ *fumC* Δ *zwf* and 5 times for the Δ *fumC* . Δ *fumC* Δ *zwf* has a higher Qp _night than the Δ *fumC* . *WT and Δ *zwf* do not produce fumarate during the night.*

**Figure 2.8** Fumarate production of the four different strains during the night. The fumarate production value is not corrected by OD. This confirms that the ΔfumCΔzwf and the ΔfumC strain produce fumarate at night.

Overall production in conditions mimicking industrial settings

The productivity of our strains in an industrial setting is the combined production of day and night. We calculated the Qp _daily over the course of a 24h period (figure 2.9). We find that the Δ fumC Δ zwf has a Qp _daily of 26.6 µM grDW ^-1 hour ^-1 , while the Δ fumC has a Qp _daily of 23.8 µM grDW ^-1 hour ^-1 . We can thus conclude that the Δ fumC Δ zwf produces more fumarate over the course of a natural day. This clearly shows the benefit of having a day/night production system (and it is extremely gratifying to see that all our modeling and experimental efforts were not in vain!)

**Figure 2.9** Qp _daily of the two different strains after 72 hours. This experiment has been carried out with similar results 4 times independently for ΔfumCΔzwf and 5 times for the ΔfumC. ΔfumCΔzwf has a higher Qp _daily than the ΔfumC. WT and Δzwf do not produce fumarate.

**Table 2.1** *Fumarate production parameters for four different strains. Qp values are in µM grDW ^-1 hour ^-1 measured after 72 hours.*

Conclusion

We showed that the Δ fumC and the Δ fumC Δ zwf are both able to produce fumarate during the daytime using the growth coupled strategy. During the night, the Δ fumC Δ zwf produces more fumarate than the Δ fumC , which confirms the extensive modeling we did for this part of the project. We can confirm that at night the Δ fumC Δ zwf is forced to direct carbon from glycogen catabolism towards the TCA cycle to form fumarate. We thus engineered a Synechocystis cell factory that is able to produce fumarate around the clock, using two different production strategies - both stable - one for day and another for night. On top of this, since we used only knock-outs and did not resort to the cloning of heterologous genes, the Δ fumC Δ zwf will be a stable production strain for many generations to come. As a bonus, the higher nighttime production of the Δ fumC Δ zwf compared to the Δ fumC does imply that by knocking out the Δ zwf , we force flux to the TCA cycle. This is an important finding, as it opens up opportunities for the nighttime production of valuable TCA cycle intermediates in Synechocystis . To our knowledge such a diurnal, dual strategy, photoautotrophic cell factory has never been reported before.

Methods

Strain construction: Δ zwf and Δ fumC Δ zwf and segregation

The zwf gene encodes glucose-6-phosphate 1-dehydrogenase, which catalyses the first step in the Pentose Phosphate Pathway. We knocked out the zwf gene in the Wild Type and the Δ fumC background, to construct the Δ zwf and the Δ fumC Δ zwf mutants. We used the Markerless knock out method . The homologous regions of the zwf gene were amplified from the Synechocystis genomic DNA, with Herculase polymerase using primers BP1, BP2, BP3 and BP4. The biobrick T vector used was the pFL-AN. Resulting in plasmid in zwf knockout plasmids, which were used for the first and second round of transformation

Characterising Δ zwf , Δ fumC and Δ fumC Δ zwf

In order to characterise the different Synechocystis strains, we performed different cultivation experiments. We simultaneously performed a batch and a turbidostat experiment in a modified Multi-Cultivator under a photonfluxostat light regime, as described in Du et al. 2016[4] and outlined on our methods page. Our Synechocystis strains were cultivated in BG-11 medium which contained 10 mM TES KOH buffer. For the batch experiment, we had 4 vessels that contained Δ fumC and 4 vessels that contained Δ fumC Δ zwf . In the turbidostat set up, we cultivated four strains i) Wild Type, ii) Δ zwf , iii) Δ fumC Δ zwf , and iv) Δ fumC all in duplicates. The light intensity per OD followed a sinusoidal regime to simulate day/night cycles yielding 16 hours of darkness (0 μE s ^-2 OD ^-1 ) and 8 hours of light (peaking at 120 μE s ^-2 OD ^-1 ), calculated by equation 2.1, where t is the time in hours.

\[2.1 \frac{\mu E}{s^{2}}="240\sin" (2\pi\cdot (\frac{t}{24}+\frac{1}{4}) )-120\]

This equation returns negative values during the period, so they are clamped at a minimum value of 0. All cultures are inoculated at an initial OD ₇₂₀ of 0.05 and were grown at a constant light intensity of 20 μE until all vessels reached an OD ₇₂₀ of 0.6. At this point, we switched the light output to the designated light regime.

Instead of the more commonly adopted 12h day/12h night, we chose a 8h day/ 16h night as indicated above. While longer days would have probably allowed us to reach higher levels of production in the lab, after visiting an actual production facility , we were convinced that this would not be representative of a real-world scenario. The structures surrounding the greenhouses in many production plans provide shading during dawn and dusk. This makes the sun rise somewhat later, and set somewhat sooner, for production photoautotrophs. Our light regime in the lab mimics this, and is yet another factor that confers credibility to the actual production numbers that we report..

Sampling and fumarate measurements

During the course of the experiment, we took samples at every perceived dawn and dusk. After sampling we had to determine the concentration of fumarate. 1 ml of sample was centrifuged at 15.000 rpm for 10 min. Then 500 μl supernatant was taken and filtered (Sartorius Stedin Biotech, minisart SRP 4, 0.22 μm) for sample preparation. Fumarate concentration was measured by HPLC-UV/VIS (LC-20AT, Prominence, Shimadzu), with ion exclusion Rezex ROA-Organic Acid column (250x4.6 mm; Phenomenex) and UV detector (SPD-20A, Prominence, Shimadzu) at 210 nm wavelength. 50 μL of the HPLC samples were injected through an autosampler (SIL-20AC, Prominence, Shimadzu), with 5 mM H ₂ SO ₄ as eluent at a flow rate of 0.15 ml min ^-1 and column temperature of 45 ℃. Fumarate retention time was determined as 18.16 and 18.36 min and fumarate samples were normalised by a correction factor composed of 10 mM divided by the measured TES concentration.

Production calculations

To calculate the fumarate production during the day and the fumarate production during the night. We made the following assumptions: i) Synechocystis does not grow in the absence of sunlight, so does not grow during the night. ii) The production of fumarate during the day is growth coupled. We calculated the fumarate yield during the day, yield _day by Δ fumarate/ Δ OD in mmol OD ^-1 over the course of 1 day in the batch culture. By dividing this number by 8 hours, we could calculate Qp _day in mmol OD ^-1 h ^-1 for the day. During the night, no cell growth was assumed, therefore we expected no change in OD, however as Synechocystis physiology changes at night, this can influence the scattering of the light and thereby the OD measurement can change during the night. To account for this effect, we determined the night time fumarate yield, yield _night as Δ fumarate/mean OD. By dividing this number by 16 hours we could calculate Qp _night in mmol OD ^-1 h ^-1 . The overall 24h fumarate production could be determined by knitting together the nighttime production and the daytime production. we determined the yield _daily as yield _day plus yield _night . Dividing this number by 24 hours, we could determine Qp _daily in mmol OD ^-1 hour ^-1 . To transform these QPs to a more familiar unit, we multiplied all QP's by a conversion factor that converts OD ₇₂₀ to gram dry weight (148 mg L ^-1 OD ^-1 [16] ) . We then receive fumarate QPs in mM gDW ^-1 hour ^-1 .

2.2 \[yield_{day} ="\frac{\triangle" [fumarate]}{\triangle OD}\] 2.3 \[yield_{night} ="\frac{\triangle" [fumarate]}{mean OD}\] 2.4 \[Qp_{day} ="\frac{yield_{day}}{8" \ Hours}\cdot148\ mg \cdot L^{-1} \cdot OD^{-1}\] 2.5 \[Qp_{night}="\frac{yield_{night}}{16" \ Hours}\cdot148\ mg \cdot L^{-1} \cdot OD^{-1} \] 2.6 \[Qp_{daily} ="\frac{yield_{day}+yield_{night}}{24" \ Hours}\cdot148\ mg \cdot L^{-1} \cdot OD^{-1}\]

▶ Beyond the native metabolic network of Synechocystis

Introduction

Being able to force the cell to direct carbon flux towards the reactions of the native TCA cycle in the Δ fumC Δ zwf strain increases the fumarate production during the night. However, by knocking out fumarase, we disrupted the cyclic nature of the TCA, which may no longer operate as a cycle. This construct yields one fumarate per glycogen catabolized. We started wondering if there could be a way to use synthetic biology to improve the nighttime production efficiency in terms of carbon usage. We turned to nature for inspiration…
Many microorganisms express a glyoxylate shunt. The glyoxylate shunt consists of two enzymes which are not natively present in Synechocystis : isocitrate lyase (ICL) and malate synthase (MS). The first enzyme, ICL, catalyzes the reaction of isocitrate into glyoxylate and succinate, where succinate can then be consumed by succinate dehydrogenase to produce fumarate and FADPH2. As for glyoxylate, this compound is then consumed by MS, along with acetyl-CoA, to make malate. Malate is then converted to oxaloacetate by malate dehydrogenase, yielding NADPH (fig. 2.11).

**Figure 2.11** The glyoxylate shunt with *ΔfumC* . The glyoxylate shunt is comprised of two enzymes: isocitrate lyase (ICL) and malate synthase (MS). The orange X signifies the knockout of the *fumC* gene.

We hypothesized that if a synthetic glyoxylate shunt was introduced into Synechocystis , this would not only reconnect the stunted Δ fumC TCA cycle, but also increase the flux towards fumarate production, by feeding into reactions which produce electron carriers - one of the main roles of the TCA cycle [17]. This would potentially align fumarate production with an increase in fitness during the night, providing the type of positive selection pressure, which could be used to stabilize the expression of this heterologous pathway in a production strain as advised by experts .

We have explored this idea by introducing the glyoxylate shunt into the genome-scale metabolic model that had been guiding our metabolic engineering strategies thus far. We found that our hypothesis is corroborated by model simulations . However, timing the activation of this pathway turned out to be of the essence when engineering a stable strain. This led us to the construction of the first fully-segregated (i.e all copies of the chromosome have the same allele) promoter library in a polyploid organism such as the cyanobacterium we work with ( Synechocystis ), but not without first developing a method to do so.

Results and discussion

Modeling the shunt

We explored the possibilities for the introduction of the glyoxylate shunt in terms of fitness-gain and fumarate production, by running simulations in which the glyoxylate shunt had been "cloned" into our ur metabolic engineering strategies thus far. We found that our hypothesis is corroborated by model (Oh! If only it was that easy in the lab as well…)

We found that the glyoxylate shunt must be well timed: it cannot be active during the day, as the glyoxylate shunt will draw carbon from more prefered pathways. We are thus faced with another challenge: how do we time the expression of the glyoxylate shunt such that the cell has a fitness advantage, while partitioning more carbon to fumarate synthesis? Clearly, only expressing the glyoxylate shunt during the night with the right expression levels is hard. The expression level and timing of a gene is, at the very least, partially regulated through its promoter. That is why we aim to look for a promoter with the right expression pattern for the shunt genes to be activate only in the night. Photoreceptor-based transcriptional circuits could at a first glance be suitable control systems. However, the delays between transcriptional activation (or repression) and the actual increase (or drop) in enzyme levels can be many hours depending for instance on protein stability. Such delay could be sufficient to remove the competitive edge of harboring the genes encoding the shunt, and therefore, rendering it phenotypically unstable.
Synechocystis harbors circadian clocks with periods close to 24 h [18]. Chances are, that there already is a promoter present in its chromosome with the right expression levels at the right time for our glyoxylate shunt enzymes. These cellular clocks allow organisms to anticipate the environmental cycles of day and night by synchronizing circadian rhythms with the rising and setting of the sun. The rhythms originate from the oscillator components of circadian clocks and control global gene expression and various cellular processes, hinting at the presence of an appropriate promoter for our shunt genes. To express the glyoxylate shunt only during the night and with the right expression levels, we aim to use what nature has to offer and make a glyoxylate shunt promoter library.

**Figure 2.12** The promoter library DNA is prepared by cutting up the genome of *Synechocystis* into fragments that have on average the size of a promoter (100-1000bp). Each of these fragments will be introduced upstream of the glyoxylate shunt genes, resulting in thousands of unique plasmids.

Making the library

The glyoxylate shunt promoter library was constructed by cutting up the genome of Synechocystis into fragments that have, on average, the size of a promoter (between 100-1000 bp). Subsequently, each of these fragments was introduced upstream of the glyoxylate shunt genes (fig. 2.12) and transformed to E. coli . A colony PCR with primers flanking the promoter region (seg_h2_fw and ms_col_rv) confirmed that all inserts had a different length (fig. 2.13). Once we were happy with our odds (99.9%) that every possible base pair is in the library at least once, the DNA was extracted from E. coli . We required our final library to be integrated into the the genome at the neutral site slr0168 of Synechocystis to ensure that the difference in observed phenotype can be attributed to the difference in promoter, rather than something else (e.g. changes in plasmid copy number). However, the introduction of the promoter library into Synechocystis was easier said than done.

**Figure 2.13** After transforming the library DNA into *E. coli* , a colony PCR with primers flanking the promoter region confirmed that every insert had a different length.

Synechocystis is a polyploid, each cell containing 4 to 20 copies of the genome depending on the physiological state and environmental conditions [19]. Polyploidy poses a challenge in creating a stable mutant strain, since the newly introduced genes have to be "fully segregated" (i.e. present in all chromosome copies) to avoid that they revert to wild type in future generations. However, a fully segregated promoter library in Synechocystis is something that has not yet been reported and poses a major challenge - How does one guarantee that all members of the library are fully segregated? - Our supervisor, told us that we had three options:

Quit here;
Colony PCR tens of thousands of colonies;
Or come up with a new method to do it.

We chose the latter and decided to develop a method to create a fully segregated (promoter) libraries in polyploid organisms.
The strategy we developed employs the markerless method that facilitates the selection for fully segregated colonies. This procedure is based on the negative selection method using the toxic gene mazF [20]. The mazF gene is an endoribonuclease that is regulated by a nickel-induced element (NIE) [21], killing the cells upon exposure to elevated concentrations of nickel. The mazF cassette needs to be introduced into the neutral site slr0168 of the Synechocystis genome, enabling the introduction of the glyoxylate shunt into the neutral site at later time points, replacing the mazF cassette itself. With this selection method, complete segregation of the glyoxylate shunt in the genome can be tested simply by adding nickel - if the colony is not fully segregated, even if there is only one copy of the mazF -cassette in the genome, the cell will be killed upon exposure to nickel! However, when a colony is fully segregated, and all the mazF cassettes are replaced by glyoxylate shunt genes, the colony remains unharmed. Furthermore, we wanted the glyoxylate shunt promoter library to represent the entire genome (i.e. as many colonies as possible to reach a probability of having all the positions in the chromosome in the library at least once approaching 100%). To expand the library, we allowed the cells time to segregate before exposing them to nickel, as cells often shift towards full segregation over time [22]. A positive selection marker was used to push cells towards full segregation. However, high amounts of antibiotics might hamper cell growth and thereby slow down segregation. Studying the segregation dynamics, we found the sweet-spot between antibiotic concentration and the timing before exposing cells to nickel: after transformation (day 0), cells were supplemented with kanamycin (50 μg/ml) on day 1 and nickel 20 μM on day 4 (fig. 2.14).
Using our newly developed method, we created the first fully segregated library representing the entire genome (99.9% confidence) of Synechocystis upstream of the glyoxylate shunt genes. What is more; the library is now ready to be tested. The beauty of the glyoxylate shunt promoter library approach lies in the fact that expressing the shunt at both the appropriate time and level increases fitness. Therefore, we can now easily select the ideal promoter using long term cultivations and letting Darwinian selection do the rest. The promoter that expresses the shunt the most optimally will be the one that grows the fastest, outcompeting the rest of the population. This will also be the best fumarate producer, which will eventually be used to further increase the nighttime fumarate production.

Conclusion

Using the genome-scale metabolic model, we found that the glyoxylate shunt can increase the growth rate of our fumarate producing strain, but only under specific conditions: (i) it cannot be active during the day, as this will result in a decrease in fitness, and (ii) the expression of glyoxylate shunt enzymes need to be at the right levels. In order to find a promoter with the right expression characteristics for the glyoxylate shunt, we developed a method to create a fully segregated promoter library in polyploid organisms, such as our own cyanobacterium Synechocystis . Using our own developed method, we created the first fully segregated library representing the entire genome (99.9% confidence) of Synechocystis upstream of the glyoxylate shunt genes. This library is now ready to be tested to further increase nighttime fumarate production.

Methods

Construction of the glyoxylate shunt genes in a plasmid

The glyoxylate shunt genes are derived from Chlorogloeopsis fritschii PCC 9212 and are obtained from the Bryant Lab in a plasmid called pAQ1Ex_cpc_MS-ICL_Sp [23]. To get both genes expressed under the same promoter, the glyoxylate shunt will be placed in a plasmid (pFLXN-h1h2-rbs-yfp-0168; obtained from MMP) that contains a ribosomal binding site (rbs) in front of each gene and a BglII restriction site where the genomic DNA fragments will be inserted. To push segregation and to select in E. coli , a kanamycin (Kan) resistance cassette was introduced in the plasmid.

Both plasmids were digested with NcoI and BamHI (Thermo Scientific FastDigest), placed on a 1% agarose gel, cut out and purified (Qiagen PCR/gel purification kit). Subsequently, the insert (MS-ICL) was ligated in the vector (pFLXN-h1h2-rbs), replacing the YFP fragment using T4 ligase and transformed to DH5alpha competent cells. Colonies were confirmed with colony PCR using primers h2_down_rv and h1_up_fw. The confirmed colonies were inoculated in LB (+50 μg/mL Kan), after which the plasmid, now called pFLXN-h1h2-rbs-MS-ICL (fig. 2.15), was extracted and sequence confirmed by Macrogen Europe (the Netherlands).

**Figure 2.15** Plasmid map of pFLXN-H1H2-rbs-MS-rbs-ICL containing the glyoxylate shunt genes with homologous regions to be integrated into the neutral site *slr0168* . Genomic DNA fragments were inserted at the BglII site.

Method to create a promoter library in polyploid organisms

Construction of the glyoxylate shunt promoter library DNA using E. coli

The construction of a promoter library consists of multiple steps. First, the genomic DNA of Synechocystis was extracted on a large scale (20 mL, OD ₇₃₀ ~5) and purified using RNAse. Then, the purified genomic DNA was digested with Sau3AI (Thermo Scientific FastDigest), yielding fragments ranging from 100-1000 bp. These fragments will be referred to as the inserts.
To open pFLXN-h1h2-rbs-MS-ICL, enabling it to integrate the inserts, the plasmid was digested with BglII which is compatible with Sau3AI (Thermo Scientific FastDigest; incubated for 3 hours, added Phosphatase after 1.5 hour to prevent self ligation).
Next, the insert was ligated in the vector using a ligation ratio of 1:7 (v:i) and transformed into Dh5-Alpha Competent E. coli cells (MCLAB) multiple times, yielding it total over 100,000 positive colonies. This led to a probability of 99.9% that any fragment in the genome will occur at least once in the library.

The colonies were washed of the plates, stored as glycerol stocks (15% glycerol; -80℃) and inoculated overnight. The plasmids were extracted using a MiniPrep (Qiagen) and stored as the promoter library DNA.

Segregation Dynamics in Synechocystis

In order to obtain a fully segregated library that represents the entire genome of Synechocystis , the segregation dynamics was studied, aiming to find the sweet-spot between kanamycin concentration and timing before exposing the library to Nickel.

Transformation

A pre-culture (fully segregated Δ fumC - mazF Ω) of 100 mL (20 mL per transformation) was used (OD ₇₃₀ = 1). The culture was spun down (3900 rpm; 10 min), washed twice with fresh BG-11 to remove possible antibiotics, and concentrated 100 times to a volume of 1 mL (200 μL per transformation) (OD ₇₃₀ = 100). Next, the library DNA was added (30 μg DNA/mL culture) to 800 μL culture. As a negative control, 200 μL of culture without DNA was used. The cultures were incubated for 5 hours (30 ℃; ~30 μmol/m2/s of constant white light), after which the 200 μL per transformed culture was diluted in fresh BG-11(20 mL) without antibiotics and incubated (~22 hours )(day 0). Subsequently, kanamycin was added in the following concentrations to push segregation (day 1):

negative control: 40 μg/mL Kan
Kan40: 40 μg/mL Kan
Kan50: 50 μg/mL Kan
Kan75: 75 μg/mL Kan
Kan100: 100 μg/mL Kan

Droplet experiment

**Table 2.2** *The ability of clones to grow (x) on different BG-11 plates. Concentrations: Kanamycin: 50 μg/mL; Nickel: 20 mM.*

Every day, the cells were plated on the three different BG-11 plates using a dilution series droplet design (fig. 2.16).
The OD ₇₃₀ of the cultures were measured, after which the dilution series was prepared using a 96 well-plate and a multichannel pipet. First, all the BG-11 was added in appropriate amounts to the wells following the pipetting scheme, after which the inoculum from the different cultures was added to row A. After mixing properly, the dilution series were made by pipetting 10 μL from row A to B. After mixing, 10 μL was pipetted from row B to C, and so on, resulting in a dilution series that contained two rows per culture:

10 ⁰ , 10 ^-1 , 10 ^-2 , 10 ^-3 , 10 ^-4 , 10 ^-5 , 10 ^-6 , 10 ^-7 .
10 ^-0.5 , 10 ^-1.5 , 10 ^-2.5 , 10 ^-3.5 , 10 ^-4.5 , 10 ^-5.5 , 10 ^-6.5 , 10 ^-7.5

From each well, 5 μL will be plated in droplets on the three types of BG-11 plates.

**Figure 2.16** *Pipetting scheme in order to make the droplet dilution series and the plating design.*

Transformation efficiency can be calculated by dividing the amount of colonies on the BG-11 plate by the amount of colonies on the BG-11 + Kan plate. The ratio of fully segregated colonies can be calculated by dividing the amount of colonies on the BG-11 + Kan plate by the amount of colonies on the BG-11 + Kan + Nickel plate. If all clones are fully segregated, this will result in a ratio of 1. Segregation efficiency can be calculated by dividing the amount of colonies on the BG-11 plate by the amount of colonies on the BG-11 + Kan + Nickel plate.

Large scale transformation of the glyoxylate shunt promoter library DNA into Synechocystis

From the segregation dynamics, the transformation and segregation efficiency was calculated to estimate the amount of transformations needed to represent the entire genome. A pre-culture ( Δ fumC - mazF Ω) of 20 mL per transformation was used (OD ₇₃₀ between 1 and 2). The culture was spun down (3900 rpm; 10 min), washed twice with fresh BG-11 to remove antibiotics, and concentrated 100 times to a volume of 200 μL per transformation. Next, the library DNA was added (30 μg DNA/mL culture) and incubated for 5 hours (30 ℃; ~30 μmol/m2/s of constant white light). After five hours, the 200 μL transformed culture was diluted in fresh BG-11(20 mL) without antibiotics and incubated for ~22 hours (day 0). Subsequently, Kanamycin was added (50 μg/mL) to push segregation (day 1) and cultivated for an additional three days. At day 4, the culture was spun down (3900 rpm; 10 min) and concentrated (OD ₇₃₀ ~40), after which 100 μL per plate was spread on BG-11 plates (1% agar) containing Kanamycin (50 μg/mL) and Nickel (20 μM). The plates were incubated for 8 days (30 ℃; ~30 μmol/m2/s of constant white light) until colonies appeared, resulting in the first fully segregated glyoxylate shunt promoter library in Synechocystis .

References

Lips, D., Schuurmans, J. M. M., dos Santos, F. B., & Hellingwerf, K. J. (2017). Many ways towards "solar fuel": Quantitative analysis of the most promising strategies and the main challenges during scale-up. Energy & Environmental Science.
René H. Wijffels, Olaf Kruse, and Klaas J. Hellingwerf. "Potential of industrial biotechnology with cyanobacteria and eukaryotic microalgae". In: Current Opinion in Biotechnology 24.3 (2013), pp. 405-413.
Patrik R. Jones. "Genetic Instability in Cyanobacteria - An Elephant in the Room?" In: Frontiers in Bioengineering and Biotechnology 2.May (2014), pp. 1-5.
Wei Du, S. Andreas Angermayr, Joeri A. Jongbloets, Douwe Molenaar, Herwig Bachmann, Klaas J. Hellingwerf, and Filipe Branco dos Santos. "Nonhierarchical flux regulation exposes the fitness burden associated with lactate production in Synechocystis sp. PCC6803". In: ACS Synthetic Biology (2016), acssynbio.6b00235.
Wei Du, Joeri A. Jongbloets, Coco van Boxtel, Hugo Pineda Hernandez, David Lips, Brett G. Oliver, Klaas J. Hellingwerf, and Filipe Branco dos Santos. "Alignment of microbial fitness with engineered product formation: Obligatory coupling between acetate production and photoautotrophic growth". 2017.
Teusink B, Smid EJ. Modelling strategies for the industrial exploitation of lactic acid bacteria. Nat Rev Microbiol. 2006;4:46-56
Darmon E, Leach DR. Bacterial genome instability. Microbiol Mol Biol Rev. 2014;78:1-39.
Renda BA, Hammerling MJ, Barrick JE. Engineering reduced evolutionary potential for synthetic biology. Mol Biosyst. 2014;10:1668-78.
Feist AM, Zielinski DC, Orth JD, Schellenberger J, Herrgard MJ, Palsson BO. Model-driven evaluation of the production potential for growth-coupled products of Escherichia coli . Metab Eng. 2010;12:173-86
Erdrich P, Knoop H, Steuer R, Klamt S. Cyanobacterial biofuels: new insights and strain design strategies revealed by computational modeling. Microb Cell Fact. 2014;13:128.
Nogales, J., Gudmundsson, S., Knight, E. M., Palsson, B. O., & Thiele, I. (2012). Detailing the optimality of photosynthesis in cyanobacteria through systems biology analysis. Proceedings of the National Academy of Sciences, 109(7), 2678-2683.
Bachmann H, Molenaar D, Branco dos Santos F, Teusink B. Experimental evolution and the adjustment of metabolic strategies in lactic acid bacteria. FEMS Microbiol Rev. 2017;41 Supp_1:S201-19.
Bryson V, Szybalski W. Microbial Selection. Science. 1952;116:45-51.
Angermayr, S. A. & Hellingwerf, K. J. On the Use of Metabolic Control Analysis in the Optimization of Cyanobacterial Biosolar Cell Factories. J. Phys. Chem. B (2013). doi:10.1021/jp4013152
Ni Wan, Drew M. DeLorenzo, Lian He, Le You, Cheryl M. Immethun, George Wang, Ed- ward E.K. Baidoo, Whitney Hollinshead, Jay D. Keasling, Tae Seok Moon, and Yinjie J. Tang. "Cyanobacterial carbon metabolism: Fluxome plasticity and oxygen dependence". In: Biotechnology and Bioengineering 114.7 (2017), pp. 1593-1602.
Du, W., Jongbloets, J. A., Hernandez, H. P., Bruggeman, F. J., Hellingwerf, K. J., & dos Santos, F. B. (2016). Photonfluxostat: A method for light-limited batch cultivation of cyanobacteria at different, yet constant, growth rates. Algal Research, 20, 118-125.
Lee J. Sweetlove, Katherine F M Beard, Adriano Nunes-Nesi, Alisdair R. Fernie, and R. George Ratcliffe. "Not just a circle: Flux modes in the plant TCA cycle". In: Trends in Plant Science 15.8 (2010), pp. 462-470
Tu, Benjamin P., and Steven L. McKnight. "Metabolic cycles as an underlying basis of biological oscillations." Nature reviews Molecular cell biology 7.9 (2006): 696-701.
Biology, C. & Soppa, J. Microbiology The ploidy level of Synechocystis sp. PCC 6803 is highly variable and is influenced by growth phase and by chemical and physical external parameters. (2016)
Cheah, Y.E., Albers, S.C. & Peebles, C.A.M. A novel counter-selection method for markerless genetic modification in Synechocystis sp. PCC 6803. Biotechnol. Prog. 29, 23-30 (2013).
Lopez-maury, L., Garcia-dominguez, M., Florencio, F. J. & Reyes, J.C. A two-component signal transduction system involved in nickel sensing in the cyanobacterium. 43, 247-256 (2002).
Griese, M. & Lange, C. Ploidy in cyanobacteria. 323, 124-131 (2011).
Zhang, Shuyi, and Donald A. Bryant. "Biochemical validation of the glyoxylate cycle in the cyanobacterium Chlorogloeopsis fritschii strain PCC 9212." Journal of Biological Chemistry 290.22 (2015): 14019-14030.

▶ Supplementary Material

@@ Line 1: / Line 1: @@
 <html>
   <head>
-   <meta charset="utf-8">
+   <meta charset="utf-8"/>
-   <meta content="ie=edge" http-equiv="x-ua-compatible">
+  <meta content="ie=edge" http-equiv="x-ua-compatible"/>
-    <meta content="width=device-width, initial-scale=1, shrink-to-fit=no" name="viewport">
+  <meta content="width=device-width, initial-scale=1, shrink-to-fit=no" name="viewport"/>
-     <title>
+  <title>
-      Production
+   Production
-     </title>
+  </title>
-     <!-- include normalizer -->
+  <!-- include normalizer -->
-     <link href="https://2017.igem.org/Team:Amsterdam/assets/css/normalize?action=raw&amp;ctype=text/css" rel="stylesheet"/>
+  <link href="https://2017.igem.org/Team:Amsterdam/assets/css/normalize?action=raw&amp;ctype=text/css" rel="stylesheet"/>
-     <!-- include auto generated css -->
+  <!-- include auto generated css -->
-     <link href="https://2017.igem.org/Team:Amsterdam/assets/css/all?action=raw&amp;ctype=text/css" rel="stylesheet"/>
+  <link href="https://2017.igem.org/Team:Amsterdam/assets/css/all?action=raw&amp;ctype=text/css" rel="stylesheet"/>
-     <!-- include auto generated javascript -->
+  <!-- include auto generated javascript -->
-     <script src="https://2017.igem.org/Team:Amsterdam/assets/js/all?action=raw&amp;ctype=text/javascript">
+  <script src="https://2017.igem.org/Team:Amsterdam/assets/js/all?action=raw&amp;ctype=text/javascript">
-     </script>
+  </script>
-     <!-- include mathjax -->
+  <!-- include mathjax -->
-     <script src="https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.2/MathJax.js?config=TeX-MML-AM_CHTML">
+  <script src="https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.2/MathJax.js?config=TeX-MML-AM_CHTML">
-     </script>
+  </script>
-    </meta>
-   </meta>
-  </meta>
   </head>
   <div class="site-wrapper">
@@ Line 27: / Line 24: @@
       <div class="container-fluid">
        <div class="navbar-header">
-        <img src="https://static.igem.org/mediawiki/2017/d/d8/Pm_logo.png">
+        <img src="https://static.igem.org/mediawiki/2017/8/86/TAmsterdam_pm_logo.png"/>
-        <a class="navbar-brand nav-link" href="https://2017.igem.org/Team:Amsterdam">
+       <a class="navbar-brand nav-link" href="https://2017.igem.org/Team:Amsterdam">
-         Photosynthetic Magic
+        Photosynthetic Magic
-        </a>
+       </a>
-       </img>
        </div>
        <ul class="list-inline nav navbar-right">
@@ Line 41: / Line 37: @@
          </a>
          <ul class="dropdown-menu">
+         <li>
+          <a class="nav-link" href="https://2017.igem.org/Team:Amsterdam/Project">
+           Overview
+          </a>
+         </li>
           <li>
            <a class="nav-link" href="https://2017.igem.org/Team:Amsterdam/Produce">
@@ Line 70: / Line 71: @@
          </a>
          <ul class="dropdown-menu">
+         <li>
+          <a class="nav-link" href="https://2017.igem.org/Team:Amsterdam/Practices">
+           Overview
+          </a>
+         </li>
           <li>
            <a class="nav-link" href="https://2017.igem.org/Team:Amsterdam/Carbon">
@@ Line 76: / Line 82: @@
           </li>
           <li>
-           <a class="nav-link" href="https://2017.igem.org/Team:Amsterdam/Silver">
+           <a class="nav-link" href="https://2017.igem.org/Team:Amsterdam/HP/Silver">
             HP Silver
            </a>
           </li>
           <li>
-           <a class="nav-link" href="https://2017.igem.org/Team:Amsterdam/Gold_Integrated">
+           <a class="nav-link" href="https://2017.igem.org/Team:Amsterdam/HP/Gold_Integrated">
             HP Gold
            </a>
@@ Line 104: / Line 110: @@
          </a>
          <ul class="dropdown-menu">
+         <li>
+          <a class="nav-link" href="https://2017.igem.org/Team:Amsterdam/Lab">
+           Overview
+          </a>
+         </li>
           <li>
            <a class="nav-link" href="https://2017.igem.org/Team:Amsterdam/Parts">
@@ Line 138: / Line 149: @@
          </a>
          <ul class="dropdown-menu">
+         <li>
+          <a class="nav-link" href="https://2017.igem.org/Team:Amsterdam/Team">
+           Overview
+          </a>
+         </li>
           <li>
            <a class="nav-link" href="https://2017.igem.org/Team:Amsterdam/Attributions">
@@ Line 166: / Line 182: @@
       <div class="summary-container">
        <div class="summary-col-left">
-        <img class="animated-module-icon" src="https://static.igem.org/mediawiki/2017/6/6e/Shunt_icon.png">
+        <img class="animated-module-icon" src="https://static.igem.org/mediawiki/2017/6/63/TAmsterdam_shunt_icon.png"/>
-        <br>
+        <br/>
-        </br>
-        </img>
        </div>
        <div class="summary-col-mid">
         <p class="summary-text">
-         <br>
+         A major requisite of cyano-cell factories, according to expert's opinion, is that they  must be able to produce in a stable fashion under industrial conditions. A recent quantitative analysis of the various ways to convert the energy of photons to chemical bonds has revealed that the direct utilization of sunlight is the most efficient [1]. This however means that cells will be exposed to diurnal regimes in which they will inevitably be exposed to periods of darkness. Our goal here is to achieve the first photoautotrophic cell factories that are able to stably produce fumarate around the clock.
-         </br>
+         <br/>
         </p>
        </div>
@@ Line 191: / Line 205: @@
         </h1>
         <p>
+        <i>
+         Synechocystis
+        </i>
+        does not naturally produce fumarate. However, model guided engineering found that removing a single gene within
+        <i>
+         Synechocystis
+        </i>
+        leads to a stable cell factory that produces fumarate as it grows during the day. Nevertheless, at night our cells do not produce fumarate, since at night, they don't grow. To overcome this challenge, we have taken a systems biology approach which interweaves theory, modeling, and experimentation to implement stable nighttime production of fumarate. We theorized that we can redirect the nighttime flux towards fumarate production by removing a competing pathway via knockout of the
+        <i>
+         zwf
+        </i>
+        gene.  Additionally, we also took inspiration from nature and speculated that the incorporation of the glyoxylate shunt would further increase our nighttime production of fumarate. Our models corroborate these predictions, however, they also suggest that the stability of the glyoxylate shunt is sensitive to the timing of when the shunt is turned on (i.e. expressed). We therefore took a robust approach to incorporate the glyoxylate shunt enzymes under ideal expression conditions.
         </p>
        </div>
@@ Line 199: / Line 225: @@
         <ul class="highlights-list">
          <li>
+         Engineered a
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         <i>
+          Synechocystis
+         </i>
+         strain, that uses different fumarate production strategies during day and night.
          </li>
          <li>
+         Developed a method to make fully segregated libraries in polyploid organisms
          </li>
          <li>
+         Created the first fully segregated library representing the entire genome (99.9% confidence) of
+         <i>
+          Synechocystis
+         </i>
+         upstream of the glyoxylate shunt genes. This library is now ready to be tested to further increase nighttime fumarate production.
+        </li>
+        <li>
+         Stable production of fumarate directly from CO
+         <sub>
+         </sub>
+         around the clock Qp
+         <sub>
+          night
+         </sub>
+         of 12.7 µM grDW
+         <sup>
+          -1
+         </sup>
+         hour
+         <sup>
+          -1
+         </sup>
+         Qp
+         <sub>
+          day
+         </sub>
+         of 52.0 µM grDW
+         <sup>
+          -1
+         </sup>
+         hour
+         <sup>
+          -1
+         </sup>
          </li>
         </ul>
        </div>
-       <div class="module-collapsible-container-outer" id="">
+       <div class="module-collapsible-container-outer" id="first">
-        <p class="in-text-link" id="" onclick="displayCollapsible(this.id)">
+        <p class="in-text-link" id="first" onclick="displayCollapsible(this.id)">
-         ▶
+         ▶  Industrial conditions
         </p>
-        <div class="module-collapsible-container-inner" id="" style="display:none;">
+        <div class="module-collapsible-container-inner" id="first" style="display:none;">
-         <p class="collapsible-main-header" id="">
+         <p class="collapsible-main-header" id="daynight">
+         Why produce during day and night?
          </p>
+        <p>
+         Our cyano-cell factory must be able to stably grow and produce under industrial conditions. At the industrial scale,
+         <i>
+          Synechocystis
+         </i>
+         and other cyanobacteria are often grown in large outdoor ponds or in greenhouses [2], where natural solar radiation is the primary source of light. This means that the cultures are subject to an oscillating light-dark cycle. Therefore, we aim to make a cyanobacterial cell factory that is able to produce fumarate in a stable fashion during, not only the day, but also the night.
+         <br/>
+         We mimicked industrial conditions in the lab by tailoring commercially available photobioreactors (MC1000-OD, PSI, Czech Republic) to be capable of simulating dynamic white light regimes. This involved developing new algorithms to incorporate the on-line measurements (e.g. OD
+         <sub>
+         </sub>
+         ) with the desired oscillatory light intensity patterns, which then had to be coded into the in-house
+         <a class="in-text-link" href="https://gitlab.com/mmp-uva/pycultivator" target="_blank">
+          software package
+         </a>
+         that controls the photobioreactors. These relatively complex
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Model" target="_blank">
+          sinusoidal functions
+         </a>
+         that we deduced may then also be optionally coupled with
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Model" target="_blank">
+          algorithms
+         </a>
+         that generate stochasticity resembling the one cells encounter in production scenarios. In combination, these new developments allow us to use lab-scale photobioreactors to mimic industrial settings operating at high cell densities in which cells perceive fluctuating light intensities on top of the sinusoidal light regimes inherent to day-night cycles. This effort, albeit time consuming and with little application of synthetic biology methods, was crucial to ensure the connectivity of our metabolic engineering strategies to the
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/HP/Gold_Integrated" target="_blank">
+          "real-world"
+         </a>
+         beyond the academic laboratory.
+        </p>
+        <p class="collapsible-main-header" id="stable">
+         Why is stability an issue?
+        </p>
+        <p>
+         Stable production at the industrial scale is a challenge of biotechnology. Production rates are often not sustained and will diminish throughout the cultivation. Furthermore, maximal production rates cannot be reached again by the same culture, even with the addition of fresh medium. This is due to the phenomena of strain instability [3].
+         <br/>
+         This generalized phenomenon can be easily understood in the light of evolution theory, Darwinian selection and population dynamics. By introducing heterologous production pathways, cellular resources are forcibly diverted towards an extraneous product, and away from anabolic processes (i.e. growth). Cells which then lose the ability to produce the product are able to grow faster and eventually take over the population based on simple Darwinian selection, resulting in the irreversible loss of production [4].
+         <br/>
+         Promising solutions to strain instability can involve the alignment of production of the desired compound with the fitness of the cell, i.e. the cell must produce in order to grow. One method for stable production is to knock-out genes whose proteins recycle anabolic byproducts [5].
+        </p>
+       </div>
+      </div>
+      <div class="module-collapsible-container-outer" id="second">
+       <p class="in-text-link" id="second" onclick="displayCollapsible(this.id)">
+        ▶  Stable daytime production -
+        <i>
+         Δ
+        </i>
+        <i>
+         fumC
+        </i>
+       </p>
+       <div class="module-collapsible-container-inner" id="second" style="display:none;">
+        <p class="collapsible-main-header" id="intro1">
+         Introduction
+        </p>
+        <p>
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/HP/Gold_Integrated" target="_blank">
+          Experts in biotechnology
+         </a>
+         have indicated to us at the onset of this project that the process unpredictability that emerges from the instability of engineered strains in production settings is one of the major technical hurdles of the field [6]. This occurs because most commonly used metabolic engineering approaches make products in direct competition with biomass formation, which imposes high fitness burdens on production strains. This ultimately leads to a rapid appearance of suppressor mutations, for instance in the form of insertions or deletions, that impair the culture's ability to form product [7][8]. So called
+         <b>
+          <i>
+           growth-coupled production
+          </i>
+         </b>
+         (i.e. obligate coupling of the synthesis of specific target products with bacterial growth) can help stabilize production traits. When the formation of product and biomass are aligned, non-producing mutants that emerge spontaneously are outcompeted by the fitter producing strains according to Darwinian selection principles [9]. The theoretical framework behind the engineering of growth-coupled strategies has thus far been underpinned by the same principle - linking a product-forming pathway to the capacity of the cell to regenerate energy and/or redox co-factors. This principle has been proposed for photoautotrophs but never successfully implemented in the laboratory [10]. The cause behind this has to do with the plasticity conferred by all the alternative electron flows surrounding the photosystems I and II, which makes it very difficult to achieve the desired strict coupling. However, recent advancements in the designing of metabolic engineering growth-coupled production strategies may bring the solution to this hurdle.
+        </p>
+        <p class="project-header">
+         How to stably produce fumarate in
+         <i>
+          Synechocystis
+         </i>
+         during the day?
+        </p>
+        <p>
+         The
+         <a class="in-text-link" href="https://2015.igem.org/Team:Amsterdam" target="_blank">
+Amsterdam iGEM team
+         </a>
+         has pioneered the development of a method to design growth-coupled strategies based on a completely different principle. Instead of using energy or redox regeneration, this is now based on the direct stoichiometric coupling of pathways uniquely responsible for the formation of biomass precursors to the production of target compounds. This is achieved through the deletion of the native metabolic route(s) that cells have to reintroduce side-products of anabolism, leading to their accumulation, and hence, ensuring their growth-coupled production.
+         <br/>
+         This concept has been developed into an algorithm to 'Find Reactions Usable In Tapping Side-products' - FRUITS. By analyzing existing genome-scale metabolic models, it identifies anabolic side-products that can be coupled to cell growth by the deletion of their re-utilization pathway(s). This pipeline is freely-available at
+         <a class="in-text-link" href="https://gitlab.com/mmp-uva/fruits.git" target="_blank">
+          https://gitlab.com/mmp-uva/fruits.git
+         </a>
+         . When applied to
+         <i>
+          Synechocystis
+         </i>
+         growing under photoautotrophic conditions, FRUITS predicts that nine compounds can be coupled to growth, of which one is fumarate.
+         <br/>
+         Prediction is that during growth, so in the light (or during the day in an industrial setting), fumarate is produced as a by-product of specific anabolic reactions within purine and urea metabolism and then re-assimilated through the TCA cycle via the activity of
+         <i>
+          fumC
+         </i>
+         (fumarase). If the only fumarate assimilation pathway present is removed, by the engineering of a
+         <i>
+          fumC
+         </i>
+         deletion strain, FRUITS predicts that fumarate will be accumulated (fig.2.1). While the precise localization of fumarate is not important in silico, in our
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Export" target="_blank">
+          module on transport
+         </a>
+         we have clarified this in reality as, according to
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Gold_Integrated" target="_blank">
+          experts
+         </a>
+         engaged in our project, it is very important for the economic feasibility of the technology here developed. The predictions of FRUITS regarding fumarate have been experimentally tested, leading to the first photoautotrophic cell factory that is able to stably produce fumarate directly from CO
+         <sub>
+         </sub>
+         .
+        </p>
+        <figure id="fig21">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/9/9d/TAmsterdam_amsterdam_production_2.1.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Figure 2.1
+          </b>
+          <i>
+           Schematic representation of fumarate metabolism in
+           <i>
+            Synechocystis
+           </i>
+           sp. PCC6803. (a) A deletion of
+           <i>
+            fumC
+           </i>
+           gene (red X) in the TCA cycle blocks fumarate re-assimilation, thereby enabling its accumulation. (b) PCR confirmation of the
+           <i>
+            Δ
+           </i>
+           <i>
+            fumC
+           </i>
+           mutant. With the primers indicated (black arrows), a clean knockout of
+           <i>
+            fumC
+           </i>
+           gives a single DNA band ~ 1.2 kb, while for wild type (WT) is ~ 2.5 kb. Abbreviations: RuBP, Ribulose-1,5-bisphosphate; G3P, Glyceraldehyde 3-phosphate.
+          </i>
+         </figcaption>
+        </figure>
+        <p class="collapsible-main-header" id="results1">
+         Results and discussion
+        </p>
+        <p class="project-header">
+         Extracellular fumarate production by  a markerless
+         <i>
+          fumC
+         </i>
+         deletion
+         <i>
+          Synechocystis
+         </i>
+         strain
+        </p>
+        <p>
+         We used a clean
+         <i>
+          Synechocystis
+         </i>
+         <i>
+          fumC
+         </i>
+         deletion mutant (
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         ) to experimentally test its capacity to produce fumarate, using the wild type
+         <i>
+          Synechocystis
+         </i>
+         as a control. Under constant light conditions,
+         <i>
+          Synechocystis
+         </i>
+         wild type and the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         strain grew similarly during the exponential growth phase. Wild type reached a slightly higher optical density after entering stationary growth phase (fig.2.2A). Not surprisingly, there was no extracellular fumarate production in
+         <i>
+          Synechocystis
+         </i>
+         wild type. In contrast, the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         strain excreted significant amounts (&gt; 1 mM) of fumarate throughout the cultivation (fig.2.2B). These results very nicely match the the in silico predictions that indicated that disrupting
+         <i>
+          fumC
+         </i>
+         would culminate in fumarate accumulation.
+        </p>
+        <figure id="fig22">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/a/a8/TAmsterdam_amsterdam_production_2.2.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Figure 2.2
+          </b>
+          <i>
+           Cell growth and extracellular fumarate production in different Synechocystis strains. (a) Cell growth of both wild type and ΔfumC in Multi-Cultivator under constant light illumination for over 200 hours. (b) Extracellular fumarate production for both strains. Error bars indicate the standard deviations.
+          </i>
+         </figcaption>
+        </figure>
+        <p>
+         While undoubtedly promising (!) these initial growth experiments do not assure that biomass and fumarate formation are strictly aligned. The strong stoichiometric coupling which we are striving to engineer implies that at different growth rates one would expect a linearly proportional change in the biomass specific production rate. The latter remained to be tested with this initial set of experiments alone.
+        </p>
+        <p class="project-header">
+         Growth-coupled production of fumarate in
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         strain
+        </p>
+        <p>
+         We tested whether fumarate production and growth rate are aligned in the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         strain, by performing 12 independent photonfluxostat at different, yet constant, growth rates [6]. This was achieved by dosing the biomass specific light flux to intensities ranging from 30 to 100 μmol photons m
+         <sup>
+          -2
+         </sup>
+         s
+         <sup>
+          -1
+         </sup>
+         OD
+         <sup>
+          -1
+         </sup>
+         . For each cultivation maintained at a different growth rate, samples were taken at different sampling times to quantify extracellular fumarate concentration. Fumarate productivities were subsequently calculated and plotted against the respective growth rate (fig. 3.A). The results obtained indicate that fumarate productivity is indeed proportional to cell growth rate, implying that both physiological traits are strongly coupled as here desired. Furthermore, we compared the linear fit between fumarate productivity and growth rate based on our experiment, with the outcome of the simulations using FBA on the metabolic network reconstruction of
+         <i>
+          Synechocystis
+         </i>
+         . It is important to highlight that we did not in anyway tweak the modeling parameters, which were taken directly from the original report [11]. Still, both fits match strikingly well, corroborating that indeed the hypothesis that fumarate production and growth rate are aligned in the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         strain seems to hold up to scrutiny.
+        </p>
+        <p>
+         We also calculated the carbon partitioning towards fumarate in the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         strain during the multiple cultivations carried out (Fig. 3B). We did not see any significant changes in carbon partitioning irrespective of the biomass specific light flux. This indicates that irrespective of the growth rate, as long as cells are illuminated, the fumarate yield on biomass is constant. This result also support theoretical predictions, which state that fumarate production is only affected by environmental conditions to the extent that the latter affect growth. In other words, that fumarate production is
+         <b>
+          stoichiometrically
+         </b>
+         and
+         <b>
+          obligatorily
+         </b>
+         coupled to growth.
+        </p>
+        <figure id="fig23">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/a/a0/TAmsterdam_amsterdam_production_2.3.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Figure 2.3
+          </b>
+          <i>
+           Strict relationship between growth and product formation in the Δ fumC strain. (a) A linear relationship between growth rate and biomass specific fumarate productivity. Each point represents a single observation, and solid line is a linear fit of all experimental data points. Dash line is based on in silico FBA simulations of the genome-scale metabolic model of Synechocystis using biomass maximization as the objective function. (b) Carbon partitioning of fumarate production on biomass at different light regimes. Error bars indicate the standard deviation of carbon partitioning calculated at times throughout the cultivation (n&gt;3).
+          </i>
+         </figcaption>
+        </figure>
+        <p class="project-header">
+         Stability of fumarate production by the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         strain
+        </p>
+        <p>
+         While we considered the body of evidence supporting fumarate growth-coupled production in the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         strain to be very convincing, whether this does indeed improve the phenotypic stability of the production trait remained to be tested. As explained above, the root of the instability comes from Darwinian selection for fitter strains. When using classical metabolic engineering strategies, the fitter strains are the non-producing ones; When using our new growth-coupled strategy, it should be the producing ones. Conditions in which cells are under a strong selection pressure for fastest growth and in which the propagation bottlenecks are smallest, are predicted to result in the fastest drops in productivity [12]. Such conditions, while maintaining the total population size relatively constant, are best met under turbidostat cultivation [13], and so these provide the harshest test ground to assess the stability of production strains.
+         <br/>
+         We cultivated the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         strain under turbidostat regimes operated at non-light limiting conditions at maximal growth rate extending for over 3 weeks. During this period we did not observe any significant changes in production rate (fig.2.4A) - a true testament to the stability of our daytime fumarate producing strain. As a control, we compared how a
+         <i>
+          Synechocystis
+         </i>
+         strain that was engineered using classical approaches to produce lactate [14] fairs under the same conditions. Lactate production in this strain was achieved by the heterologous expression of lactate dehydrogenase from Lactococcus lactis, yielding an initial carbon partitioning as the one here reported for fumarate. As theory would dictate, lactate production was lost within 5 to 10 days for this strain (fig.2.4B). This result reinforces the stringency with which this regimes selects for fitter cells, which when using our engineering method, means the producing ones.
+        </p>
+        <figure id="fig24">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/1/15/TAmsterdam_amsterdam_production_2.4.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Figure 2.4
+          </b>
+          <i>
+           Production stability of fumarate (a) and lactate (b) during prolonged turbidostat cultivation under continuous light.For fumarate, productivity in corresponding time points was normalized based on the average productivity at the first time point (set to be 100%). The error bars indicate the standard deviations of 4 replicates. For lactate, each symbol represents a single observation normalized by its first time point (set to be 100%). The initial burden of deviating carbon from biomass formation for both products is similar, highlighting the success of the engineering strategy deployed for fumarate.
+          </i>
+         </figcaption>
+        </figure>
+        <p class="collapsible-main-header" id="conc1">
+         Conclusion
+        </p>
+        <p>
+         The model guided metabolic engineering strategy to achieve stable growth coupled production of fumarate during the day (i.e. while cells are growing) in the photosynthetic cyanobacterium
+         <i>
+          Synechocystis
+         </i>
+         has been successfully implemented and validated. We provide evidence that (i) the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         strain produces fumarate; (ii) does so in a growth-coupled fashion; and (iii) that this approach completely stabilizes the production trait. This is the first report of fumarate production directly from CO
+         <sub>
+         </sub>
+         using an engineered cyanobacterium. Thus far, albeit stable, this production is limited to the day since that is when cells grow. Further modeling and genetic engineering in this module of the project, will exploit how this can also be done during the
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Produce#intro2" target="_blank">
+          night
+         </a>
+         or exploiting the
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Produce" target="_blank">
+          incorporation
+         </a>
+         of pathways that are not native to
+         <i>
+          Synechocystis
+         </i>
+         .
+        </p>
+        <p class="collapsible-main-header" id="methods1">
+         Methods
+        </p>
+        <p class="project-header">
+         Strains
+        </p>
+        <p>
+         The
+         <i>
+          Synechocystis
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         strain was obtained from the collection of the Molecular Microbial Physiology Group from the University of Amsterdam. This strain has the
+         <i>
+          fumC
+         </i>
+         gene which encodes for the TCA cycle enzyme fumarase deleted from its genome. This is a fully segregated strain that has been made clean of all antibiotic resistance markers using the
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Methods" target="_blank">
+          markerless method
+         </a>
+         we adopted in our project.
+        </p>
+        <p class="project-header">
+         Batch and photonfluxostat cultivation
+        </p>
+        <p>
+         The batch cultivation was performed in Multi-Cultivator (MC1000-OD, PSI, Czech Republic), with light intensity controlled through a "cool-white" LED panel (PSI, CZ). BG11 supplied with 10 mM TES-NaOH (pH = 8.0) was used for
+         <i>
+          Synechocystis
+         </i>
+         cultivation at 30 ℃ and bubbled by a mix (v/v) of 99 % N
+         <sub>
+         </sub>
+         and 1% CO
+         <sub>
+         </sub>
+         at a flow rate of ~150 ml min
+         <sup>
+          -1
+         </sup>
+         . The pre-cultures (OD
+         <sub>
+         </sub>
+         ≈ 2) from the shake flask were used for inoculation in the Multi-Cultivator, with an initial OD
+         <sub>
+         </sub>
+         of 0.05 and working volume of 60 ml. Continuous light was given at fixed light intensity of 30 μmol photons m
+         <sup>
+          -2
+         </sup>
+         s
+         <sup>
+          -1
+         </sup>
+         after inoculation, and 120 μmol photons m
+         <sup>
+          -2
+         </sup>
+         s
+         <sup>
+          -1
+         </sup>
+         when OD
+         <sub>
+         </sub>
+         reached 0.5. Samples were taken daily, where OD was recorded and supernatant was prepared. Regarding the photonfluxostats[16], all the cultivation conditions are the same as for batch cultivation except for the light intensity settings. Light intensity was 30 μmol photons m
+         <sup>
+          -2
+         </sup>
+         s
+         <sup>
+          -1
+         </sup>
+         after inoculation. When OD
+         <sub>
+         </sub>
+         (measured through the build-in OD sensor of the Multi-Cultivator at 720 nm calibrated to the external spectrophotometer at 730 nm) was above 0.6, light intensity was automatically adjusted every 5 min to ensure light intensity per OD
+         <sub>
+         </sub>
+         was constant. This light regime was maintained until maximum capacity of the LED panel was reached. Under photonfluxostat mode, a "steady-state" would be achieved and constant growth rate can be reliably obtained. Samples were taken every a few hours during this phase, where OD
+         <sub>
+         </sub>
+         was measured and fumarate concentration was quantified.
+        </p>
+        <p class="project-header">
+         Turbidostat cultivation
+        </p>
+        <p>
+         We studied the genetic stability of our strains in populations maintained under turbidostat model [13]. In this continuous cultivation method, microbial populations are kept at a fixed biomass density by diluting the culture with fresh medium at the same rate as the populations grows. This feedback loop applies a strong selection pressure on cells to grow at the maximal specific growth rate. The turbidostat setup used in this experiment is based on a modified Multi-Cultivator, with additional pumps (Reglo ICC, ISMATEC, Germany) transferring fresh medium to the cultures, and subsequently, to a waste container (i.e. as in a classical chemostat). The "pycultivator" software package that controls the Multi-Cultivator and adjunct hardware, additionally sets the pumps to dilute the cultures if the selected OD
+         <sub>
+         </sub>
+         threshold is reached. Cells from pre-cultures in shake flasks were inoculated at OD
+         <sub>
+         </sub>
+         ~0.05 in 4 independent cylindrical vessels of the Multi-Cultivator, using the same conditions as specified before, except for the incident light intensity, which was fixed at 100 μmol photons m
+         <sup>
+          -2
+         </sup>
+         s
+         <sup>
+          -1
+         </sup>
+         . The OD
+         <sub>
+         </sub>
+         was recorded every 5 min. When the threshold of OD
+         <sub>
+         </sub>
+         &gt; 0.6 was reached, cultures were diluted by 8% (v/v) with fresh BG11. Strain stability was assessed by monitoring growth rate and fumarate and lactate production in time. Growth rate was calculated by fitting a linear function through the natural logarithm of the OD
+         <sub>
+         </sub>
+         during each cell "growth-dilution" cycle. Samples for exometabolite production were collected periodically throughout the cultivation period. The variation in production rate, expressed in percentage, was calculated relative to the one observed at the beginning of the cultivation experiment.
+        </p>
+        <p class="project-header">
+         Fumarate and lactate quantification
+        </p>
+        <p>
+         Culture samples were harvested at selected time points. To determine the concentration of exometabolites, at least 500 μL aliquot was taken. Cells were removed through centrifugation for 10 min at 15,000 rpm at 4 ℃. The resulting supernatant was then filtered (Sartorius Stedin Biotech, minisart SRP 4, 0.22 μm) for sample preparation. Exometabolite concentrations were measured by HPLC-UV/VIS (LC-20AT, Prominence, Shimadzu), with ion exclusion Rezex ROA-Organic Acid column (250x4.6 mm; Phenomenex) and UV detector (SPD-20A, Prominence, Shimadzu) at 210 nm wavelength. 10 μL of the HPLC samples were injected through an autosampler (SIL-20AC, Prominence, Shimadzu), with 5 mMH
+         <sub>
+         </sub>
+         SO
+         <sub>
+         </sub>
+         as eluent at a flow rate of 0.15 ml min
+         <sup>
+          -1
+         </sup>
+         and column temperature of 45 ℃. The retention time for fumarate and lactate are 18.26 min and 16.20, respectively on the system used.
+        </p>
+       </div>
+      </div>
+      <div class="module-collapsible-container-outer" id="third">
+       <p class="in-text-link" id="third" onclick="displayCollapsible(this.id)">
+        ▶  Stable nighttime production -
+        <i>
+         Δ
+        </i>
+        <i>
+         fumC
+        </i>
+        <i>
+         Δ
+        </i>
+        <i>
+         zwf
+        </i>
+       </p>
+       <div class="module-collapsible-container-inner" id="third" style="display:none;">
+        <p class="collapsible-main-header" id="intro2">
+         Introduction
+        </p>
+        <p class="project-header">
+         How to stably produce fumarate during the night?
+        </p>
+        <p>
+         Experts in the field of biotechnology explained to us that production with photoautotrophs is to the best of their knowledge not been explored. After all the claim to fame of these organisms is precisely their ability to use the energy of light. Nonetheless, a significant part of the energy from light captured during the day is used by these organisms to make storage compounds such as glycogen [24] or poly-hydroxybutyrate[25]. If we explore the production possibilities of fumarate in
+         <i>
+          Synechocystis
+         </i>
+         during the night, we face a challenge. As
+         <i>
+          Synechocystis
+         </i>
+         does not grow without sunlight, the growth coupled production strategy of fumarate is not possible during the night. Thus, we expect no growth coupled fumarate production. But is there another strategy in which we can exploit the night to produce fumarate?
+        </p>
+        <p>
+         In order to survive the night,
+         <i>
+          Synechocystis
+         </i>
+         produces energy by catabolizing its glycogen storage [24]. The TCA cycle is often associated with this process as it provides the electron carriers for ATP production via respiration.  As fumarate is an intermediate metabolite in the TCA cycle, increasing the carbon flux through the TCA cycle could be exploited to increase fumarate production during the night.
+        </p>
+        <p>
+         An unexpected challenge, probably quite unique to photoautotrophs, that emerged is that flux measurements experimentally determined that
+         <i>
+          Synechocystis
+         </i>
+         does not use the TCA cycle at night as anticipated, but as rather evolved to prefer the Pentose Phosphate Pathway (PPP) [15]. During the night, the PPP can also act as an additional electron carrier producing pathway, which is preferred over the TCA cycle in
+         <i>
+          Synechocystis
+         </i>
+         for this function [15], potentially because it does not release so much of the energy already stored in the carbon bonds. End-product of PPP will be a pentose (5 carbon skeleton), while the TCA cycle will produce CO
+         <sub>
+         </sub>
+         which was so costly to fix in the first place!
+        </p>
+        <p>
+         To increase the flux through the TCA cycle, we took a modeling approach, which predicted that we could increase flux towards the TCA cycle by deletion of the
+         <i>
+          zwf
+         </i>
+         gene, which codes for  Glucose-6-phosphate 1-dehydrogenase. It catalyzes the first step in the PPP. By removing the PPP, our
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Model#ppp" target="_blank">
+          model
+         </a>
+         predicts that the cell is then forced to have a higher flux towards the TCA cycle to reconcile the loss in reducing equivalent production. When combined with the
+         <i>
+          fumC
+         </i>
+         deletion, this will lead to an increased production of fumarate, which we have tested (and confirmed) in a photonfluxostat experiment.
+        </p>
+        <p class="collapsible-main-header" id="results2">
+         Results and Discussion
+        </p>
+        <p class="project-header">
+         Extracellular fumarate production by  a markerless
+         <i>
+          Synechocystis
+          <i>
+           Δ
+          </i>
+          <i>
+           fumC
+          </i>
+          <i>
+           Δ
+          </i>
+          <i>
+           zwf
+          </i>
+          strain
+         </i>
+        </p>
+        <p>
+         We constructed the
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         and
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         knockouts and confirmed complete absence of antibiotic resistant cassettes for  both strains (fig.2.5). On our quest to a diurnal production system, we have characterised both strains in a
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Produce#methods1" target="_blank">
+          batch experiment
+         </a>
+         and compared the production capacity of these strain, during the day and night phases. We earlier
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Produce#methods1" target="_blank">
+          showed
+         </a>
+         that the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         strain is able to produce fumarate under continuous light. Therefore, we expect the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         to be able to produce fumarate during the day in our diurnal regime as well. From our systems biology approach, we
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Model#ppp" target="_blank">
+          predicted
+         </a>
+         that the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         strain is able to produce fumarate in a similar fashion as the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         during the day, also using growth coupled production.  On top of the strictly growth-coupled production, our
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Model#ppp" target="_blank">
+          model
+         </a>
+         also predicted that the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         strain produces fumarate during the night from the flux that is redirected from the PPP towards the TCA. This implies that the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         should have an increased total daily fumarate production over the course of 24 hours.
+        </p>
+        <figure id="fig25">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/8/8c/TAmsterdam_amsterdam_production_2.5.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Figure 2.5
+          </b>
+          <i>
+           PCR confirmation of gene deletions on Wild Type and Δ fumC background of Δ zwf and Δ fumC Δ zwf. A clean knockout gives a single DNA band at 2202 bp, while for wild type (WT) this is 3.430 bp. As a positive control (C+) the knockout plasmid was used and as negative control (C-) the mazF plasmid was used. Most importantly the Wild Type (WT) gene is not present anymore in our strains, which implies that the strains are fully segregated knock outs.
+          </i>
+         </figcaption>
+        </figure>
+        <p class="project-header">
+         Daytime production
+        </p>
+        <p>
+         From the diurnal batch culture, we were able to calculate the daytime production for the two strains (N=4 for both strains). After 72 hours at an OD
+         <sub>
+         </sub>
+         of ~2, which is realistic for industrial settings, both the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         and the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         strain produce fumarate with a maximum Qp
+         <sub>
+          day
+         </sub>
+         of 58.7 µM grDW
+         <sup>
+          -1
+         </sup>
+         hour
+         <sup>
+          -1
+         </sup>
+         for the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         and 52.0 µM grDW
+         <sup>
+          -1
+         </sup>
+         hour
+         <sup>
+          -1
+         </sup>
+         for the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         over the course of one day fig.2.6. This confirms that (i) the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         is able to produce during the day, when mimicking industrial settings with a diurnal and sinusoidal light regime, and (ii) the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         produces a similar amount of fumarate during the day as the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         . As expected both the WT and the
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         strain did not produce fumarate during the day.
+        </p>
+        <figure id="fig26">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/c/c0/TAmsterdam_amsterdam_production_2.6.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Figure 2.6
+          </b>
+          <i>
+           Qp
+           <sub>
+            day
+           </sub>
+           of the different strains. After 72h. This experiment has been carried out with similar results 4 times independently for
+           <i>
+            Δ
+           </i>
+           <i>
+            fumC
+           </i>
+           <i>
+            Δ
+           </i>
+           <i>
+            zwf
+           </i>
+           and 5 times for the
+           <i>
+            Δ
+           </i>
+           <i>
+            fumC
+           </i>
+           .
+           <i>
+            Δ
+           </i>
+           <i>
+            fumC
+           </i>
+           <i>
+            Δ
+           </i>
+           <i>
+            zwf
+           </i>
+           has a higher Qp
+           <sub>
+            day
+           </sub>
+           than the
+           <i>
+            Δ
+           </i>
+           <i>
+            fumC
+           </i>
+           .
+           <i>
+            WT and
+            <i>
+             Δ
+            </i>
+            <i>
+             zwf
+            </i>
+            do not produce fumarate during the night.
+           </i>
+          </i>
+         </figcaption>
+        </figure>
+        <p class="project-header">
+         Night time production in conditions mimicking industrial settings
+        </p>
+        <p>
+         Based on our modeling results we expected the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         to have
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Model#ppp" target="_blank">
+          increased
+         </a>
+         fumarate production during the night compared to the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         strain. We can see that already after 64 hours, the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         has a Qp
+         <sub>
+          night
+         </sub>
+         of 12.5 µM grDW
+         <sup>
+          -1
+         </sup>
+         hour
+         <sup>
+          -1
+         </sup>
+         , while the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         has a Qp
+         <sub>
+          night
+         </sub>
+         of 5.2 µM grDW
+         <sup>
+          -1
+         </sup>
+         hour
+         <sup>
+          -1
+         </sup>
+         (fig.2.7). This beautifully confirms the predicted results obtained from modeling.
+        </p>
+        <p>
+         It must be noted however, that nighttime fumarate production can be perceived as finite since it relies on the glycogen storages that were built up during the day. The reported QP is calculated by looking at the night as whole. Although the comparisons between the strains are still valid, it is important to understand that QP is not necessarily constant throughout the night as it depends on the dynamics of glycogen catabolism.
+        </p>
+        <p>
+         The
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         strain produced fumarate during the night, and albeit not much, still it directly contradicts our model predictions. Even if we do not correct for OD, there is an increase in fumarate concentration during the night (fig. 2.8), further supporting that the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         indeed (unexpectedly) produces fumarate during the night. This can be easily explained by one of the pitfalls of constraint based analysis techniques such as the ones we used - they assume optimality. The dynamic flux balance analysis predicts that using the PPP at night is preferred over the TCA, and hence, the corresponding flux distributions deduced do not lead to fumarate production. The thing is that Life does not always have to conform to the optimality principles that underlie the modeling, as there might be other factors which are not captured in the model at play. For instance, one could speculate that cells adopt an anticipatory behavior during the night and want to make some amino acids that are derived from TCA intermediates. That could explain why a residual flux towards the TCA could still be beneficial. One thing remains clear, though - deletion of the
+         <i>
+          zwf
+         </i>
+         gene combined with the
+         <i>
+          fumC
+         </i>
+         drastically increases fumarate production in the dark - nearly 3 fold! This also opens up possibilities for the production of other TCA cycle intermediates at night with
+         <i>
+          Synechocystis
+         </i>
+        </p>
+        <figure id="fig27">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/7/7c/TAmsterdam_amsterdam_production_2.7.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Figure 2.7
+          </b>
+          <i>
+           Qp
+           <sub>
+            night
+           </sub>
+           of the two strains after 64h. This experiment has been carried out with similar results 4 times independently for
+           <i>
+            Δ
+           </i>
+           <i>
+            fumC
+           </i>
+           <i>
+            Δ
+           </i>
+           <i>
+            zwf
+           </i>
+           and 5 times for the
+           <i>
+            Δ
+           </i>
+           <i>
+            fumC
+           </i>
+           .
+           <i>
+            Δ
+           </i>
+           <i>
+            fumC
+           </i>
+           <i>
+            Δ
+           </i>
+           <i>
+            zwf
+           </i>
+           has a higher Qp
+           <sub>
+            night
+           </sub>
+           than the
+           <i>
+            Δ
+           </i>
+           <i>
+            fumC
+           </i>
+           .
+           <i>
+            WT and
+            <i>
+             Δ
+            </i>
+            <i>
+             zwf
+            </i>
+            do not produce fumarate during the night.
+           </i>
+          </i>
+         </figcaption>
+        </figure>
+        <figure id="fig28">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/d/dc/TAmsterdam_amsterdam_production_2.8.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Figure 2.8
+          </b>
+          <i>
+           Fumarate production of the four different strains during the night. The fumarate production value is not corrected by OD. This confirms that the ΔfumCΔzwf and the ΔfumC strain produce fumarate at night.
+          </i>
+         </figcaption>
+        </figure>
+        <p class="project-header">
+         Overall production in conditions mimicking industrial settings
+        </p>
+        <p>
+         The productivity of our strains in an industrial setting is the combined production of day and night. We calculated the Qp
+         <sub>
+          daily
+         </sub>
+         over the course of a 24h period (figure 2.9). We find that the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         has a Qp
+         <sub>
+          daily
+         </sub>
+         of 26.6 µM grDW
+         <sup>
+          -1
+         </sup>
+         hour
+         <sup>
+          -1
+         </sup>
+         , while the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         has a Qp
+         <sub>
+          daily
+         </sub>
+         of 23.8 µM grDW
+         <sup>
+          -1
+         </sup>
+         hour
+         <sup>
+          -1
+         </sup>
+         . We can thus conclude that the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         produces more fumarate over the course of a natural day. This clearly shows the benefit of having a day/night production system (and it is extremely gratifying to see that all our modeling and experimental efforts were not in vain!)
+        </p>
+        <figure id="fig29">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/3/3b/TAmsterdam_amsterdam_production_2.9.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Figure 2.9
+          </b>
+          <i>
+           Qp
+           <sub>
+            daily
+           </sub>
+           of the two different strains after 72 hours. This experiment has been carried out with similar results 4 times independently for  ΔfumCΔzwf and 5 times for the ΔfumC. ΔfumCΔzwf  has a higher Qp
+           <sub>
+            daily
+           </sub>
+           than the ΔfumC. WT and Δzwf do not produce fumarate.
+          </i>
+         </figcaption>
+        </figure>
+        <figure id="table21">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/f/f0/TAmsterdam_amsterdam_production_table21.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Table 2.1
+          </b>
+          <i>
+           Fumarate production parameters for four different strains. Qp values are in µM grDW
+           <sup>
+            -1
+           </sup>
+           hour
+           <sup>
+            -1
+           </sup>
+           measured after 72 hours.
+          </i>
+         </figcaption>
+        </figure>
+        <p class="collapsible-main-header" id="conc2">
+         Conclusion
+        </p>
+        <p>
+         We showed that the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         and the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         are both able to produce fumarate during the daytime using the growth coupled strategy. During the night, the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         produces more fumarate than the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         , which confirms the extensive
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Model#ppp" target="_blank">
+          modeling
+         </a>
+         we did for this part of the project. We can confirm that at night the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         is forced to direct carbon from glycogen catabolism  towards the TCA cycle to form fumarate. We thus engineered a
+         <i>
+          Synechocystis
+         </i>
+         cell factory that is able to produce fumarate around the clock, using two different production strategies - both stable - one for day and another for night. On top of this, since we used only knock-outs and did not resort to the cloning of heterologous genes, the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         will be a stable production strain for many generations to come. As a bonus, the higher nighttime production of the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         compared to the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         does imply that by knocking out the
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         , we force flux to the TCA cycle. This is an important finding, as it opens up opportunities for the nighttime production of valuable TCA cycle intermediates in
+         <i>
+          Synechocystis
+         </i>
+         . To our knowledge such a diurnal, dual strategy, photoautotrophic cell factory has never been reported before.
+        </p>
+        <p class="collapsible-main-header" id="methods2">
+         Methods
+        </p>
+        <p class="project-header">
+         Strain construction:
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         and
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         and segregation
+        </p>
+        <p>
+         The
+         <i>
+          zwf
+         </i>
+         gene encodes glucose-6-phosphate 1-dehydrogenase, which catalyses the first step in the Pentose Phosphate Pathway. We knocked out the
+         <i>
+          zwf
+         </i>
+         gene in the Wild Type and the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         background, to construct the
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         and the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         mutants. We used the
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Methods" target="_blank">
+          Markerless knock out method
+         </a>
+         . The homologous regions of the
+         <i>
+          zwf
+         </i>
+         gene were amplified from the
+         <i>
+          Synechocystis
+         </i>
+         genomic DNA, with Herculase polymerase using primers BP1, BP2, BP3 and BP4. The
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Methods" target="_blank">
+          biobrick T vector
+         </a>
+         used was the pFL-AN. Resulting in plasmid in
+         <i>
+          zwf
+         </i>
+         knockout plasmids, which were used for the  first and second round of transformation
+        </p>
+        <p class="project-header" id="char-zwf">
+         Characterising
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         ,
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         and
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+        </p>
+        <p>
+         In order to characterise the different
+         <i>
+          Synechocystis
+         </i>
+         strains, we performed different cultivation experiments. We simultaneously performed a batch and a turbidostat experiment in a modified Multi-Cultivator under a photonfluxostat light regime, as described in Du et al. 2016[4] and outlined on our methods page. Our
+         <i>
+          Synechocystis
+         </i>
+         strains were cultivated in BG-11 medium which contained 10 mM TES KOH buffer. For the batch experiment, we had 4  vessels that contained
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         and 4 vessels that contained
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         . In the turbidostat set up, we cultivated four  strains i) Wild Type, ii)
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         , iii)
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         , and iv)
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         all in duplicates. The light intensity per OD followed a sinusoidal regime to simulate day/night cycles yielding 16 hours of darkness (0 μE s
+         <sup>
+          -2
+         </sup>
+         OD
+         <sup>
+          -1
+         </sup>
+         ) and 8 hours of light (peaking at 120 μE s
+         <sup>
+          -2
+         </sup>
+         OD
+         <sup>
+          -1
+         </sup>
+         ), calculated by equation 2.1, where t is the time in hours.
+        </p>
+        <p>
+         \[2.1 \frac{\mu E}{s^{2}}="240\sin" (2\pi\cdot (\frac{t}{24}+\frac{1}{4}) )-120\]
+        </p>
+        <p>
+         This equation returns negative values during the period, so they are clamped at a minimum value of 0. All cultures are inoculated at an initial OD
+         <sub>
+         </sub>
+         of 0.05 and were grown at a constant light intensity of 20 μE until all vessels reached an OD
+         <sub>
+         </sub>
+         of 0.6. At this point, we switched the light output to the designated light regime.
+        </p>
+        <p>
+         Instead of the more commonly adopted 12h day/12h night, we chose a 8h day/ 16h night as indicated above. While longer days would have probably allowed us to reach higher levels of production in the lab, after visiting an actual
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/HP/Gold_Integrated" target="_blank">
+          production facility
+         </a>
+         , we were convinced that this would not be representative of a real-world scenario. The structures surrounding the greenhouses in many production plans provide shading during dawn and dusk. This makes the sun rise somewhat later, and set somewhat sooner,  for production photoautotrophs. Our light regime in the lab mimics this, and is yet another factor that confers credibility to the actual production numbers that we report..
+        </p>
+        <p class="project-header">
+         Sampling and fumarate measurements
+        </p>
+        <p>
+         During the course of the  experiment, we took samples at every perceived dawn and dusk.  After sampling we had to determine the concentration of fumarate. 1 ml of sample was centrifuged at 15.000 rpm  for 10 min. Then 500 μl supernatant was taken and filtered (Sartorius Stedin Biotech, minisart SRP 4, 0.22 μm) for sample preparation. Fumarate concentration was measured by HPLC-UV/VIS (LC-20AT, Prominence, Shimadzu), with ion exclusion Rezex ROA-Organic Acid column (250x4.6 mm; Phenomenex) and UV detector (SPD-20A, Prominence, Shimadzu) at 210 nm wavelength. 50 μL of the HPLC samples were injected through an autosampler (SIL-20AC, Prominence, Shimadzu), with 5 mM H
+         <sub>
+         </sub>
+         SO
+         <sub>
+         </sub>
+         as eluent at a flow rate of 0.15 ml min
+         <sup>
+          -1
+         </sup>
+         and column temperature of 45 ℃. Fumarate retention time was determined as 18.16 and 18.36 min and fumarate samples were normalised by a correction factor composed of 10 mM divided by the measured TES concentration.
+        </p>
+        <p class="project-header">
+         Production calculations
+        </p>
+        <p>
+         To calculate the fumarate production during the day and the fumarate production during the night. We made the following assumptions: i)
+         <i>
+          Synechocystis
+         </i>
+         does not grow in the absence of sunlight, so does not grow during the night. ii) The production of fumarate during the day is growth coupled.  We calculated the fumarate yield during the day, yield
+         <sub>
+          day
+         </sub>
+         by
+         <i>
+          Δ
+         </i>
+         fumarate/
+         <i>
+          Δ
+         </i>
+         OD in mmol OD
+         <sup>
+          -1
+         </sup>
+         over the course of 1 day in the batch culture. By dividing  this number by 8 hours, we could calculate Qp
+         <sub>
+          day
+         </sub>
+         in mmol OD
+         <sup>
+          -1
+         </sup>
+         h
+         <sup>
+          -1
+         </sup>
+         for the day. During the night, no cell growth was assumed, therefore we expected no change in OD, however as
+         <i>
+          Synechocystis
+         </i>
+         physiology changes at night, this can influence the scattering of the light and thereby the OD measurement can change during the night.  To account for this effect, we determined the night time fumarate yield, yield
+         <sub>
+          night
+         </sub>
+         as
+         <i>
+          Δ
+         </i>
+         fumarate/mean OD. By dividing this number by 16 hours we could calculate Qp
+         <sub>
+          night
+         </sub>
+         in mmol OD
+         <sup>
+          -1
+         </sup>
+         h
+         <sup>
+          -1
+         </sup>
+         . The overall 24h fumarate production could be determined by knitting together the nighttime production and the daytime production. we determined the  yield
+         <sub>
+          daily
+         </sub>
+         as yield
+         <sub>
+          day
+         </sub>
+         plus yield
+         <sub>
+          night
+         </sub>
+         . Dividing this number by 24 hours, we could determine Qp
+         <sub>
+          daily
+         </sub>
+         in mmol OD
+         <sup>
+          -1
+         </sup>
+         hour
+         <sup>
+          -1
+         </sup>
+         . To transform these QPs to a more familiar unit, we multiplied all QP's  by  a conversion factor that converts OD
+         <sub>
+         </sub>
+         to gram dry weight (148 mg L
+         <sup>
+          -1
+         </sup>
+         OD
+         <sup>
+          -1
+         </sup>
+         [16] ) . We then receive fumarate QPs  in mM gDW
+         <sup>
+          -1
+         </sup>
+         hour
+         <sup>
+          -1
+         </sup>
+         .
+        </p>
+        <p>
+.2 \[yield_{day} ="\frac{\triangle" [fumarate]}{\triangle OD}\] 2.3 \[yield_{night} ="\frac{\triangle" [fumarate]}{mean OD}\] 2.4 \[Qp_{day} ="\frac{yield_{day}}{8" \ Hours}\cdot148\ mg \cdot L^{-1} \cdot OD^{-1}\] 2.5 \[Qp_{night}="\frac{yield_{night}}{16" \ Hours}\cdot148\ mg \cdot L^{-1} \cdot OD^{-1} \] 2.6 \[Qp_{daily} ="\frac{yield_{day}+yield_{night}}{24" \ Hours}\cdot148\ mg \cdot L^{-1} \cdot OD^{-1}\]
+        </p>
+       </div>
+      </div>
+      <div class="module-collapsible-container-outer" id="fourth">
+       <p class="in-text-link" id="fourth" onclick="displayCollapsible(this.id)">
+        ▶  Beyond the native metabolic network of
+        <i>
+         Synechocystis
+        </i>
+       </p>
+       <div class="module-collapsible-container-inner" id="fourth" style="display:none;">
+        <p class="collapsible-main-header" id="intro3">
+         Introduction
+        </p>
+        <p>
+         Being able to force the cell to direct carbon flux towards the reactions of the native TCA cycle in the
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         <i>
+          Δ
+         </i>
+         <i>
+          zwf
+         </i>
+         strain increases the fumarate production during the night. However, by knocking out fumarase, we disrupted the cyclic nature of  the TCA, which may no longer operate as a cycle. This construct yields one fumarate per glycogen catabolized. We started wondering if there could be a way to use synthetic biology to improve the nighttime production efficiency in terms of carbon usage. We turned to nature for inspiration…
+         <br>
+          Many microorganisms express a glyoxylate shunt. The glyoxylate shunt consists of two enzymes which are not natively present in
+          <i>
+           Synechocystis
+          </i>
+          : isocitrate lyase (ICL) and malate synthase (MS). The first enzyme, ICL, catalyzes the reaction of isocitrate into glyoxylate and succinate, where succinate can then be consumed by succinate dehydrogenase to produce fumarate and FADPH2. As for glyoxylate, this compound is then consumed by MS, along with acetyl-CoA, to make malate. Malate is then converted to oxaloacetate by malate dehydrogenase, yielding NADPH (fig. 2.11).
+         </br>
+        </p>
+        <figure id="fig211">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/8/83/TAmsterdam_amsterdam_production_2.11.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Figure 2.11
+          </b>
+          <i>
+           The glyoxylate shunt with
+           <i>
+            ΔfumC
+           </i>
+           . The glyoxylate shunt is comprised of two enzymes: isocitrate lyase (ICL) and malate synthase (MS). The orange X signifies the knockout of the
+           <i>
+            fumC
+           </i>
+           gene.
+          </i>
+         </figcaption>
+        </figure>
+        <p>
+         We hypothesized that if a synthetic glyoxylate shunt was introduced into
+         <i>
+          Synechocystis
+         </i>
+         , this would not only reconnect the stunted
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         TCA cycle, but also increase the flux towards fumarate production, by feeding into reactions which produce electron carriers - one of the main roles of the TCA cycle [17]. This would potentially align fumarate production with an increase in fitness during the night, providing the type of positive selection pressure, which could be used to stabilize the expression of this heterologous pathway in a production strain as advised by
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/HP/Gold_Integrated" target="_blank">
+          experts
+         </a>
+         .
+        </p>
+        <p>
+         We have explored this idea by introducing the glyoxylate shunt into the genome-scale metabolic model that had been guiding our metabolic engineering strategies thus far. We found that our hypothesis is corroborated by
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Model" target="_blank">
+          model simulations
+         </a>
+         . However, timing the activation of this pathway turned out to be of the essence when engineering a stable strain. This led us to the construction of the first fully-segregated (i.e all copies of the chromosome have the same allele) promoter library in a polyploid organism such as the cyanobacterium we work with (
+         <i>
+          Synechocystis
+         </i>
+         ), but not without first developing a method to do so.
+        </p>
+        <p class="collapsible-main-header" id="results3">
+         Results and discussion
+        </p>
+        <p class="project-header">
+         Modeling the shunt
+        </p>
+        <p>
+         We explored the possibilities for the introduction of the glyoxylate shunt in terms of fitness-gain and fumarate production, by running simulations in which the glyoxylate shunt had been "cloned" into our ur metabolic engineering strategies thus far. We found that our hypothesis is corroborated by
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Model" target="_blank">
+          model
+         </a>
+         (Oh! If only it was that easy in the lab as well…)
+        </p>
+        <p>
+         We found that the glyoxylate shunt must be well timed: it cannot be active during the day, as the glyoxylate shunt will draw carbon from more prefered pathways. We are thus faced with another challenge: how do we time the expression of the glyoxylate shunt such that the cell has a fitness advantage, while partitioning more carbon to fumarate synthesis? Clearly, only expressing the glyoxylate shunt during the night with the right expression levels is hard. The expression level and timing of a gene is, at the very least, partially regulated through its promoter. That is why we aim to look for a promoter with the right expression pattern for the shunt genes to be activate only in the night. Photoreceptor-based transcriptional circuits could at a first glance be suitable control systems. However, the delays between transcriptional activation (or repression) and the actual increase (or drop) in enzyme levels can be many hours depending for instance on protein stability. Such delay could be sufficient to remove the competitive edge of harboring the genes encoding the shunt, and therefore, rendering it phenotypically unstable.
+         <br>
+          <i>
+           Synechocystis
+          </i>
+          harbors circadian clocks with periods close to 24 h [18]. Chances are, that there already is a promoter present in its chromosome with the right expression levels at the right time for our glyoxylate shunt enzymes. These cellular clocks allow organisms to anticipate the environmental cycles of day and night by synchronizing circadian rhythms with the rising and setting of the sun. The rhythms originate from the oscillator components of circadian clocks and control global gene expression and various cellular processes, hinting at the presence of an appropriate promoter for our shunt genes. To express the glyoxylate shunt only during the night and with the right expression levels, we aim to use what nature has to offer and make a glyoxylate shunt promoter library.
+         </br>
+        </p>
+        <figure id="fig212">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/e/e3/TAmsterdam_amsterdam_production_2.12.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Figure 2.12
+          </b>
+          <i>
+           The promoter library DNA is prepared by cutting up the genome of
+           <i>
+            Synechocystis
+           </i>
+           into fragments that have on average the size of a promoter (100-1000bp). Each of these fragments will be introduced upstream of the glyoxylate shunt genes, resulting in thousands of unique plasmids.
+          </i>
+         </figcaption>
+        </figure>
+        <p class="project-header">
+         Making the library
+        </p>
+        <p>
+         The glyoxylate shunt  promoter library was constructed by cutting up the genome of
+         <i>
+          Synechocystis
+         </i>
+         into fragments that have, on average, the size of a promoter (between 100-1000 bp). Subsequently, each of these fragments was introduced upstream of the glyoxylate shunt genes (fig. 2.12) and transformed to
+         <i>
+          E. coli
+         </i>
+         . A colony PCR with primers flanking the promoter region (seg_h2_fw and ms_col_rv) confirmed that all inserts had a different length (fig. 2.13). Once we were happy with our odds (99.9%) that every possible base pair is in the library at least once, the DNA was extracted from
+         <i>
+          E. coli
+         </i>
+         .  We required our final library to be integrated into the the genome at the neutral site
+         <i>
+          slr0168
+         </i>
+         of
+         <i>
+          Synechocystis
+         </i>
+         to ensure that the difference in observed phenotype can be attributed to the difference in promoter, rather than something else (e.g. changes in plasmid copy number). However, the introduction of the promoter library into
+         <i>
+          Synechocystis
+         </i>
+         was easier said than done.
+        </p>
+        <figure id="fig213">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/e/e2/TAmsterdam_amsterdam_production_2.13.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Figure 2.13
+          </b>
+          <i>
+           After transforming the library DNA into
+           <i>
+            E. coli
+           </i>
+           , a colony PCR with primers flanking the promoter region confirmed that every insert had a different length.
+          </i>
+         </figcaption>
+        </figure>
+        <p>
+         <i>
+          Synechocystis
+         </i>
+         is a polyploid, each cell containing 4 to 20 copies of the genome depending on the physiological state and environmental conditions [19]. Polyploidy poses a challenge in creating a stable mutant strain, since the newly introduced genes have to be "fully segregated" (i.e. present in all chromosome copies) to avoid that they revert to wild type in future generations. However, a fully segregated promoter library in
+         <i>
+          Synechocystis
+         </i>
+         is something that has not yet been reported and poses a major challenge - How does one guarantee that all members of the library are fully segregated? - Our supervisor, told us that we had three options:
+        </p>
+        <ul class="produce-list">
+         <li>
+          Quit here;
+         </li>
+         <li>
+          Colony PCR tens of thousands of colonies;
+         </li>
+         <li>
+          Or come up with a new method to do it.
+         </li>
+        </ul>
+        <p>
+         We chose the latter and decided to develop a method to create a fully segregated (promoter) libraries in polyploid organisms.
+         <br>
+          The strategy we developed employs the
+          <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Method" target="_blank">
+           markerless method
+          </a>
+          that facilitates the selection for fully segregated colonies. This procedure is based on the negative selection method using the toxic gene
+          <i>
+           mazF
+          </i>
+          [20]. The
+          <i>
+           mazF
+          </i>
+          gene is an endoribonuclease that is regulated by a nickel-induced element (NIE) [21], killing the cells upon exposure to elevated concentrations of nickel. The
+          <i>
+           mazF
+          </i>
+          cassette needs to be introduced into the neutral site
+          <i>
+           slr0168
+          </i>
+          of the
+          <i>
+           Synechocystis
+          </i>
+          genome, enabling the introduction of the glyoxylate shunt into the neutral site at later time points, replacing the
+          <i>
+           mazF
+          </i>
+          cassette itself. With this selection method, complete segregation of the glyoxylate shunt in the genome can be tested simply by adding nickel - if the colony is not fully segregated, even if there is only one copy of the
+          <i>
+           mazF
+          </i>
+          -cassette in the genome, the cell will be killed upon exposure to nickel! However, when a colony is fully segregated, and all the
+          <i>
+           mazF
+          </i>
+          cassettes are replaced by glyoxylate shunt genes, the colony remains unharmed. Furthermore, we wanted the glyoxylate shunt promoter library to represent the entire genome (i.e. as many colonies as possible to reach a probability of having all the positions in the chromosome in the library at least once approaching 100%). To expand the library, we allowed the cells time to segregate before exposing them to nickel, as cells often shift towards full segregation over time [22].  A positive selection marker was used to push cells towards full segregation. However, high amounts of antibiotics might hamper cell growth and thereby slow down segregation. Studying the segregation dynamics, we found the sweet-spot between antibiotic concentration and the timing before exposing cells to nickel: after transformation (day 0), cells were supplemented with kanamycin (50 μg/ml) on day 1 and nickel 20 μM on day 4 (fig. 2.14).
+          <br>
+           Using our newly developed method, we created the first fully segregated library representing the entire genome (99.9% confidence) of
+           <i>
+            Synechocystis
+           </i>
+           upstream of the glyoxylate shunt genes. What is more; the library is now ready to be tested. The beauty of the glyoxylate shunt promoter library approach lies in the fact that expressing the shunt at both the appropriate time and level increases fitness. Therefore, we can now easily select the ideal promoter using long term cultivations and letting Darwinian selection do the rest. The promoter that expresses the shunt the most optimally will be the one that grows the fastest, outcompeting the rest of the population. This will also be the best fumarate producer, which will eventually be used to further increase the nighttime fumarate production.
+          </br>
+         </br>
+        </p>
+        <figure id="fig214">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/d/de/TAmsterdam_amsterdam_production_2.14.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Figure 2.14
+          </b>
+          <i>
+          </i>
+         </figcaption>
+        </figure>
+        <p class="collapsible-main-header" id="conc3">
+         Conclusion
+        </p>
+        <p>
+         Using the genome-scale metabolic model, we found that the glyoxylate shunt can increase the growth rate of our fumarate producing strain, but only under specific conditions: (i) it cannot be active during the day, as this will result in a decrease in fitness, and (ii) the expression of glyoxylate shunt enzymes need to be at the right levels. In order to find a promoter with the right expression characteristics for the glyoxylate shunt, we developed a method to create a fully segregated promoter library in polyploid organisms, such as our own cyanobacterium
+         <i>
+          Synechocystis
+         </i>
+         . Using our own developed method, we created the first fully segregated library representing the entire genome (99.9% confidence) of
+         <i>
+          Synechocystis
+         </i>
+         upstream of the glyoxylate shunt genes. This library is now ready to be tested to further increase nighttime fumarate production.
+        </p>
+        <p class="collapsible-main-header" id="methods3">
+         Methods
+        </p>
+        <p class="project-header">
+         Construction of the glyoxylate shunt genes in a plasmid
+        </p>
+        <p>
+         The glyoxylate shunt genes are derived from
+         <i>
+          Chlorogloeopsis fritschii
+         </i>
+         PCC 9212 and are obtained from the Bryant Lab in a plasmid called pAQ1Ex_cpc_MS-ICL_Sp [23]. To get both genes expressed under the same promoter, the glyoxylate shunt will be placed in a plasmid (pFLXN-h1h2-rbs-yfp-0168; obtained from MMP) that contains a ribosomal binding site (rbs) in front of each gene and a BglII restriction site where the genomic DNA fragments will be inserted. To push segregation and to select in
+         <i>
+          E. coli
+         </i>
+         , a kanamycin (Kan) resistance cassette was introduced in the plasmid.
+        </p>
+        <p>
+         Both plasmids were digested with NcoI and BamHI (Thermo Scientific FastDigest), placed on a 1% agarose gel, cut out and purified (Qiagen PCR/gel purification kit). Subsequently, the insert (MS-ICL) was ligated in the vector (pFLXN-h1h2-rbs), replacing the YFP fragment using T4 ligase and transformed to DH5alpha competent cells. Colonies were confirmed with colony PCR using primers h2_down_rv and h1_up_fw. The confirmed colonies were inoculated in LB (+50 μg/mL Kan), after which the plasmid, now called pFLXN-h1h2-rbs-MS-ICL (fig. 2.15), was extracted and sequence confirmed by Macrogen Europe (the Netherlands).
+        </p>
+        <figure id="fig215">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/c/cd/TAmsterdam_amsterdam_production_2.15.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Figure 2.15
+          </b>
+          <i>
+           Plasmid map of pFLXN-H1H2-rbs-MS-rbs-ICL containing the glyoxylate shunt genes with homologous regions to be integrated into the neutral site
+           <i>
+            slr0168
+           </i>
+           . Genomic DNA fragments were inserted at the BglII site.
+          </i>
+         </figcaption>
+        </figure>
+        <p class="project-header">
+         Method to create a promoter library in polyploid organisms
+        </p>
+        <p class="project-header">
+         <i>
+          Construction of the glyoxylate shunt promoter library DNA using E. coli
+         </i>
+        </p>
+        <p>
+         The construction of a promoter library consists of multiple steps. First, the genomic DNA of
+         <i>
+          Synechocystis
+         </i>
+         was
+         <a class="in-text-link" href="https://2017.igem.org/Team:Amsterdam/Methods" target="_blank">
+          extracted
+         </a>
+         on a large scale (20 mL, OD
+         <sub>
+         </sub>
+         ~5) and purified using RNAse. Then, the purified genomic DNA was digested with Sau3AI (Thermo Scientific FastDigest), yielding fragments ranging from 100-1000 bp. These fragments will be referred to as the inserts.
+         <br>
+          To open pFLXN-h1h2-rbs-MS-ICL, enabling it to integrate the inserts, the plasmid was digested with BglII which is compatible with Sau3AI (Thermo Scientific FastDigest; incubated for 3 hours, added Phosphatase after 1.5 hour to prevent self ligation).
+          <br>
+           Next, the insert was ligated in the vector using a ligation ratio of 1:7 (v:i) and transformed into Dh5-Alpha Competent  E. coli cells (MCLAB) multiple times, yielding it total over 100,000 positive colonies. This led to a probability of 99.9% that any fragment in the genome will occur at least once in the library.
+          </br>
+         </br>
+        </p>
+        <figure id="box21">
+         <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/9/99/TAmsterdam_amsterdam_production_box21.png"/>
+         <figcaption class="module-figure-text">
+          <b>
+           Box 2.1
+          </b>
+          <i>
+          </i>
+         </figcaption>
+        </figure>
+        <p>
+         The colonies were washed of the plates, stored as glycerol stocks (15% glycerol; -80℃) and inoculated overnight. The plasmids were extracted using a MiniPrep (Qiagen) and stored as the promoter library DNA.
+        </p>
+        <p class="project-header">
+         <i>
+          Segregation Dynamics in
+          <i>
+           Synechocystis
+          </i>
+         </i>
+        </p>
+        <p>
+         In order to obtain a fully segregated library that represents the entire genome of
+         <i>
+          Synechocystis
+         </i>
+         , the segregation dynamics was studied, aiming to find the sweet-spot between kanamycin concentration and timing before exposing the library to Nickel.
+        </p>
+        <p class="project-header">
+         Transformation
+        </p>
+        <p>
+         A pre-culture (fully segregated
+         <i>
+          Δ
+         </i>
+         <i>
+          fumC
+         </i>
+         -
+         <i>
+          mazF
+         </i>
+         Ω) of 100 mL (20 mL per transformation) was used (OD
+         <sub>
+         </sub>
+         = 1). The culture was spun down (3900 rpm; 10 min), washed twice with fresh BG-11 to remove possible antibiotics, and concentrated 100 times to a volume of 1 mL (200 μL per transformation) (OD
+         <sub>
+         </sub>
+         = 100). Next, the library DNA was added (30 μg DNA/mL culture) to 800 μL culture.  As a negative control, 200 μL of culture without DNA was used. The cultures were incubated for 5 hours (30  ℃; ~30 μmol/m2/s of constant white light), after which the 200 μL per transformed culture was diluted in fresh BG-11(20 mL) without antibiotics and incubated (~22 hours )(day 0). Subsequently, kanamycin was added in the following concentrations to push segregation (day 1):
+        </p>
+        <ul class="produce-list">
+         <li>
+          negative control:     40 μg/mL Kan
+         </li>
+         <li>
+          Kan40:      40 μg/mL Kan
+         </li>
+         <li>
+          Kan50:      50 μg/mL Kan
+         </li>
+         <li>
+          Kan75:      75 μg/mL Kan
+         </li>
+         <li>
+          Kan100:     100 μg/mL Kan
+         </li>
+        </ul>
+        <br>
+         <p class="project-header">
+          <i>
+           Droplet experiment
+          </i>
+         </p>
+         <figure id="table22">
+          <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/7/74/TAmsterdam_amsterdam_production_table22.png"/>
+          <figcaption class="module-figure-text">
+           <b>
+            Table 2.2
+           </b>
+           <i>
+            The ability of clones to grow (x) on different BG-11 plates. Concentrations: Kanamycin: 50 μg/mL; Nickel: 20 mM.
+           </i>
+          </figcaption>
+         </figure>
+         <p>
+          Every day, the cells were plated on the three different BG-11 plates using a dilution series droplet design (fig. 2.16).
+          <br>
+           The OD
+           <sub>
+           </sub>
+           of the cultures were measured, after which the dilution series was prepared using a 96 well-plate and a multichannel pipet. First, all the BG-11 was added in appropriate amounts to the wells following the pipetting scheme, after which the inoculum from the different cultures was added to row A. After mixing properly, the dilution series were made by pipetting 10 μL from row A to B. After mixing, 10 μL was pipetted from row B to C, and so on, resulting in a dilution series that contained two rows per culture:
+           <br/>
+           <br/>
+           <sup>
+           </sup>
+           , 10
+           <sup>
+            -1
+           </sup>
+           , 10
+           <sup>
+            -2
+           </sup>
+           , 10
+           <sup>
+            -3
+           </sup>
+           , 10
+           <sup>
+            -4
+           </sup>
+           , 10
+           <sup>
+            -5
+           </sup>
+           , 10
+           <sup>
+            -6
+           </sup>
+           , 10
+           <sup>
+            -7
+           </sup>
+           .
+           <br/>
+           <sup>
+            -0.5
+           </sup>
+           , 10
+           <sup>
+            -1.5
+           </sup>
+           , 10
+           <sup>
+            -2.5
+           </sup>
+           , 10
+           <sup>
+            -3.5
+           </sup>
+           , 10
+           <sup>
+            -4.5
+           </sup>
+           , 10
+           <sup>
+            -5.5
+           </sup>
+           , 10
+           <sup>
+            -6.5
+           </sup>
+           , 10
+           <sup>
+            -7.5
+           </sup>
+           <br/>
+           <br/>
+           From each well, 5 μL will be plated in droplets on the three types of BG-11 plates.
+          </br>
+         </p>
+         <figure id="fig216">
+          <img class="module-figure-image" src="https://static.igem.org/mediawiki/2017/4/43/TAmsterdam_amsterdam_production_2.16.png"/>
+          <figcaption class="module-figure-text">
+           <b>
+            Figure 2.16
+           </b>
+           <i>
+            Pipetting scheme in order to make the droplet dilution series and the plating design.
+           </i>
+          </figcaption>
+         </figure>
+         <p>
+          Transformation efficiency can be calculated by dividing the amount of colonies on the BG-11 plate by the amount of colonies on the BG-11 + Kan plate. The ratio of fully segregated colonies can be calculated by dividing the amount of colonies on the BG-11 + Kan plate by the amount of colonies on the BG-11 + Kan + Nickel plate. If all clones are fully segregated, this will result in a ratio of 1. Segregation efficiency can be calculated by dividing the amount of colonies on the BG-11 plate by the amount of colonies on the BG-11 + Kan + Nickel plate.
+         </p>
+         <p class="project-header">
+          <i>
+           Large scale transformation of the glyoxylate shunt promoter library DNA into
+           <i>
+            Synechocystis
+           </i>
+          </i>
+         </p>
+         <p>
+          From the segregation dynamics, the transformation and segregation efficiency was calculated to estimate the amount of transformations needed to represent the entire genome. A pre-culture (
+          <i>
+           Δ
+          </i>
+          <i>
+           fumC
+          </i>
+          -
+          <i>
+           mazF
+          </i>
+          Ω) of 20 mL per transformation was used (OD
+          <sub>
+          </sub>
+          between 1 and 2). The culture was spun down (3900 rpm; 10 min), washed twice with fresh BG-11 to remove antibiotics, and concentrated 100 times to a volume of 200 μL per transformation. Next, the library DNA was added (30 μg DNA/mL culture) and incubated for 5 hours (30  ℃; ~30 μmol/m2/s of constant white light).  After five hours, the 200 μL transformed culture was diluted in fresh BG-11(20 mL) without antibiotics and incubated for ~22 hours (day 0). Subsequently, Kanamycin was added (50 μg/mL) to push segregation (day 1) and cultivated for an additional three days. At day 4, the culture was spun down (3900 rpm; 10 min) and concentrated (OD
+          <sub>
+          </sub>
+          ~40), after which 100 μL per plate was spread on BG-11 plates (1% agar) containing Kanamycin (50 μg/mL) and Nickel (20 μM).  The plates were incubated for 8 days (30  ℃; ~30 μmol/m2/s of constant white light) until colonies appeared, resulting in the first fully segregated glyoxylate shunt promoter library in
+          <i>
+           Synechocystis
+          </i>
+          .
+         </p>
+        </br>
         </div>
        </div>
@@ Line 221: / Line 2,472: @@
         <ol class="references-list">
          <li>
+         Lips, D., Schuurmans, J. M. M., dos Santos, F. B., &amp; Hellingwerf, K. J. (2017). Many ways towards "solar fuel": Quantitative analysis of the most promising strategies and the main challenges during scale-up. Energy &amp; Environmental Science.
          </li>
          <li>
+         René H. Wijffels, Olaf Kruse, and Klaas J. Hellingwerf. "Potential of industrial biotechnology with cyanobacteria and eukaryotic microalgae". In: Current Opinion in Biotechnology 24.3 (2013), pp. 405-413.
          </li>
          <li>
+         Patrik R. Jones. "Genetic Instability in Cyanobacteria - An Elephant in the Room?" In: Frontiers in Bioengineering and Biotechnology 2.May (2014), pp. 1-5.
+        </li>
+        <li>
+         Wei Du, S. Andreas Angermayr, Joeri A. Jongbloets, Douwe Molenaar, Herwig Bachmann, Klaas J. Hellingwerf, and Filipe Branco dos Santos. "Nonhierarchical flux regulation exposes the fitness burden associated with lactate production in
+         <i>
+          Synechocystis
+         </i>
+         sp. PCC6803". In: ACS Synthetic Biology (2016), acssynbio.6b00235.
+        </li>
+        <li>
+         Wei Du, Joeri A. Jongbloets, Coco van Boxtel, Hugo Pineda Hernandez, David Lips, Brett G. Oliver, Klaas J. Hellingwerf, and Filipe Branco dos Santos. "Alignment of microbial fitness with engineered product formation: Obligatory coupling between acetate production and photoautotrophic growth". 2017.
+        </li>
+        <li>
+         Teusink B, Smid EJ. Modelling strategies for the industrial exploitation of lactic acid bacteria. Nat Rev Microbiol. 2006;4:46-56
+        </li>
+        <li>
+         Darmon E, Leach DR. Bacterial genome instability. Microbiol Mol Biol Rev. 2014;78:1-39.
+        </li>
+        <li>
+         Renda BA, Hammerling MJ, Barrick JE. Engineering reduced evolutionary potential for synthetic biology. Mol Biosyst. 2014;10:1668-78.
+        </li>
+        <li>
+         Feist AM, Zielinski DC, Orth JD, Schellenberger J, Herrgard MJ, Palsson BO. Model-driven evaluation of the production potential for growth-coupled products of
+         <i>
+          Escherichia coli
+         </i>
+         . Metab Eng. 2010;12:173-86
+        </li>
+        <li>
+         Erdrich P, Knoop H, Steuer R, Klamt S. Cyanobacterial biofuels: new insights and strain design strategies revealed by computational modeling. Microb Cell Fact. 2014;13:128.
+        </li>
+        <li>
+         Nogales, J., Gudmundsson, S., Knight, E. M., Palsson, B. O., &amp; Thiele, I. (2012). Detailing the optimality of photosynthesis in cyanobacteria through systems biology analysis. Proceedings of the National Academy of Sciences, 109(7), 2678-2683.
+        </li>
+        <li>
+         Bachmann H, Molenaar D, Branco dos Santos F, Teusink B. Experimental evolution and the adjustment of metabolic strategies in lactic acid bacteria. FEMS Microbiol Rev. 2017;41 Supp_1:S201-19.
+        </li>
+        <li>
+         Bryson V, Szybalski W. Microbial Selection. Science. 1952;116:45-51.
+        </li>
+        <li>
+         Angermayr, S. A. &amp; Hellingwerf, K. J. On the Use of Metabolic Control Analysis in the Optimization of Cyanobacterial Biosolar Cell Factories. J. Phys. Chem. B (2013). doi:10.1021/jp4013152
+        </li>
+        <li>
+         Ni Wan, Drew M. DeLorenzo, Lian He, Le You, Cheryl M. Immethun, George Wang, Ed- ward E.K. Baidoo, Whitney Hollinshead, Jay D. Keasling, Tae Seok Moon, and Yinjie J. Tang. "Cyanobacterial carbon metabolism: Fluxome plasticity and oxygen dependence". In: Biotechnology and Bioengineering 114.7 (2017), pp. 1593-1602.
+        </li>
+        <li>
+         Du, W., Jongbloets, J. A., Hernandez, H. P., Bruggeman, F. J., Hellingwerf, K. J., &amp; dos Santos, F. B. (2016). Photonfluxostat: A method for light-limited batch cultivation of cyanobacteria at different, yet constant, growth rates. Algal Research, 20, 118-125.
+        </li>
+        <li>
+         Lee J. Sweetlove, Katherine F M Beard, Adriano Nunes-Nesi, Alisdair R. Fernie, and R. George Ratcliffe. "Not just a circle: Flux modes in the plant TCA cycle". In: Trends in Plant Science 15.8 (2010), pp. 462-470
+        </li>
+        <li>
+         Tu, Benjamin P., and Steven L. McKnight. "Metabolic cycles as an underlying basis of biological oscillations." Nature reviews Molecular cell biology 7.9 (2006): 696-701.
+        </li>
+        <li>
+         Biology, C. &amp; Soppa, J. Microbiology The ploidy level of
+         <i>
+          Synechocystis
+         </i>
+         sp. PCC 6803 is highly variable and is influenced by growth phase and by chemical and physical external parameters. (2016)
+        </li>
+        <li>
+         Cheah, Y.E., Albers, S.C. &amp; Peebles, C.A.M. A novel counter-selection method for markerless genetic modification in
+         <i>
+          Synechocystis
+         </i>
+         sp. PCC 6803. Biotechnol. Prog. 29, 23-30 (2013).
+        </li>
+        <li>
+         Lopez-maury, L., Garcia-dominguez, M., Florencio, F. J. &amp; Reyes, J.C. A two-component signal transduction system involved in nickel sensing in the cyanobacterium. 43, 247-256 (2002).
+        </li>
+        <li>
+         Griese, M. &amp; Lange, C. Ploidy in cyanobacteria. 323, 124-131 (2011).
+        </li>
+        <li>
+         Zhang, Shuyi, and Donald A. Bryant. "Biochemical validation of the glyoxylate cycle in the cyanobacterium
+         <i>
+          Chlorogloeopsis fritschii
+         </i>
+         strain PCC 9212." Journal of Biological Chemistry 290.22 (2015): 14019-14030.
          </li>
         </ol>
@@ Line 236: / Line 2,570: @@
        </div>
       </div>
-     <script>
-      function displayCollapsible(clicked_id) {
-		    var inner = document.querySelector("#"+clicked_id+".module-collapsible-container-inner");
-		    var text = document.querySelector("#"+clicked_id+".module-collapsible-container-outer > .in-text-link")
-		    if (inner.style.display === "none") {
-		        inner.style.display = "flex";
-		        console.log(text.innerHTML);
-		        text.innerHTML = text.innerHTML.replace(/▶/g, "▼");
-		    } else {
-		        inner.style.display = "none";
-		        text.innerHTML = text.innerHTML.replace(/▼/g, "▶");
-		    }
-		}
-     </script>
      </div>
      <div class="footer">
-      <div class="footer-col-left">
+      <div class="footer-wide">
+      <a href="http://www.auf.nl/" style="order:1" target="_blank">
+       <img alt="Auf" class="footer-sponsor-img" id="auf" src="https://static.igem.org/mediawiki/2017/5/5c/TAmsterdam_auf.png">
+       </img>
+      </a>
+      <a href="https://www.gss.uva.nl/" style="order:15" target="_blank">
+       <img alt="Gss" class="footer-sponsor-img" id="gss" src="https://static.igem.org/mediawiki/2017/d/d8/TAmsterdam_gss.png">
+       </img>
+      </a>
        <a href="https://www.aimms.vu.nl/en/index.aspx" style="order:9" target="_blank">
-        <img alt="Aimms1" class="footer-sponsor-img" id="aimms" src="https://static.igem.org/mediawiki/2017/3/36/Aimms1.png"/>
+        <img alt="Aimms1" class="footer-sponsor-img" id="aimms" src="https://static.igem.org/mediawiki/2017/8/8d/TAmsterdam_aimms1.png">
+       </img>
        </a>
        <a href="https://www.amsterdamsciencepark.nl/" style="order:11" target="_blank">
-        <img alt="Sciencepark" class="footer-sponsor-img" id="sciencepark" src="https://static.igem.org/mediawiki/2017/a/aa/Sciencepark.png"/>
+        <img alt="Sciencepark" class="footer-sponsor-img" id="sciencepark" src="https://static.igem.org/mediawiki/2017/b/b2/TAmsterdam_sciencepark.png">
-      </a>
+       </img>
-      <a href="http://www.auf.nl/" style="order:1" target="_blank">
-       <img alt="Auf" class="footer-sponsor-img" id="auf" src="https://static.igem.org/mediawiki/2017/1/11/Auf.png"/>
        </a>
        <a href="https://www.dsm.com/" style="order:5" target="_blank">
-        <img alt="Dsm" class="footer-sponsor-img" id="dsm" src="https://static.igem.org/mediawiki/2017/4/4a/Dsm.png"/>
+        <img alt="Dsm" class="footer-sponsor-img" id="dsm" src="https://static.igem.org/mediawiki/2017/3/38/TAmsterdam_dsm.png">
-      </a>
+       </img>
-      <a href="https://www.gss.uva.nl/" style="order:15" target="_blank">
-       <img alt="Gss" class="footer-sponsor-img" id="gss" src="https://static.igem.org/mediawiki/2017/8/82/Gss.png"/>
        </a>
        <a href="https://eu.idtdna.com/site" style="order:3" target="_blank">
-        <img alt="Idt" class="footer-sponsor-img" id="idt" src="https://static.igem.org/mediawiki/2017/8/86/Idt.png"/>
+        <img alt="Idt" class="footer-sponsor-img" id="idt" src="https://static.igem.org/mediawiki/2017/c/c5/TAmsterdam_idt.png">
+       </img>
        </a>
        <a href="https://www.matrixic.nl/" style="order:12" target="_blank">
-        <img alt="Matrix" class="footer-sponsor-img" id="matrix" src="https://static.igem.org/mediawiki/2017/8/84/Matrix.png"/>
+        <img alt="Matrix" class="footer-sponsor-img" id="matrix" src="https://static.igem.org/mediawiki/2017/5/57/TAmsterdam_matrix.png">
+       </img>
        </a>
        <a href="http://www.merckmillipore.com/" style="order:10" target="_blank">
-        <img alt="Merck" class="footer-sponsor-img" id="merck" src="https://static.igem.org/mediawiki/2017/d/dc/Merck.png"/>
+        <img alt="Merck" class="footer-sponsor-img" id="merck" src="https://static.igem.org/mediawiki/2017/e/e5/TAmsterdam_merck.png">
+       </img>
        </a>
        <a href="http://rivm.nl/en" style="order:14" target="_blank">
-        <img alt="Rivm" class="footer-sponsor-img" id="rivm" src="https://static.igem.org/mediawiki/2017/e/e8/Rivm.png"/>
+        <img alt="Rivm" class="footer-sponsor-img" id="rivm" src="https://static.igem.org/mediawiki/2017/f/f3/TAmsterdam_rivm.png">
+       </img>
        </a>
        <a href="http://phenomenex.com/" style="order:10" target="_blank">
-        <img alt="Phenomenex" class="footer-sponsor-img" id="phenomenex" src="https://static.igem.org/mediawiki/2017/a/af/Phenomenex.png"/>
+        <img alt="Phenomenex" class="footer-sponsor-img" id="phenomenex" src="https://static.igem.org/mediawiki/2017/0/02/TAmsterdam_phenomenex.png">
+       </img>
        </a>
        <a href="http://www.snapgene.com/" style="order:6" target="_blank">
-        <img alt="Snapgene" class="footer-sponsor-img" id="snapgene" src="https://static.igem.org/mediawiki/2017/8/8d/Snapgene.png"/>
+        <img alt="Snapgene" class="footer-sponsor-img" id="snapgene" src="https://static.igem.org/mediawiki/2017/8/80/TAmsterdam_snapgene.png">
+       </img>
        </a>
        <a href="http://sils.uva.nl/" style="order:8" target="_blank">
-        <img alt="Sils" class="footer-sponsor-img" id="sils" src="https://static.igem.org/mediawiki/2017/8/8a/Sils.png"/>
+        <img alt="Sils" class="footer-sponsor-img" id="sils" src="https://static.igem.org/mediawiki/2017/e/e4/TAmsterdam_sils.png">
+       </img>
        </a>
        <a href="https://www.unitedconsumers.com/" style="order:7" target="_blank">
-        <img alt="United consumers" class="footer-sponsor-img" id="unitedconsumers" src="https://static.igem.org/mediawiki/2017/7/7d/United_consumers.png"/>
+        <img alt="United consumers" class="footer-sponsor-img" id="unitedconsumers" src="https://static.igem.org/mediawiki/2017/2/2d/TAmsterdam_united_consumers.png">
+       </img>
        </a>
        <a href="https://www.vu.nl/en/" style="order:2" target="_blank">
-        <img alt="Vu" class="footer-sponsor-img" id="vu" src="https://static.igem.org/mediawiki/2017/4/40/Vu.png"/>
+        <img alt="Vu" class="footer-sponsor-img" id="vu" src="https://static.igem.org/mediawiki/2017/5/5a/TAmsterdam_vu.png">
+       </img>
        </a>
        <a href="https://science.vu.nl/en/index.aspx" style="order:4" target="_blank">
-        <img alt="Vu fs" class="footer-sponsor-img" id="vufs" src="https://static.igem.org/mediawiki/2017/a/aa/Vu_fs.png"/>
+        <img alt="Vu fs" class="footer-sponsor-img" id="vufs" src="https://static.igem.org/mediawiki/2017/3/38/TAmsterdam_vu_fs.png">
+       </img>
        </a>
        <a href="https://www.cs.vu.nl/en/" style="order:13" target="_blank">
-        <img alt="Vu cs" class="footer-sponsor-img" id="vucs" src="https://static.igem.org/mediawiki/2017/a/a8/Vu_cs.png"/>
+        <img alt="Vu cs" class="footer-sponsor-img" id="vucs" src="https://static.igem.org/mediawiki/2017/c/ca/TAmsterdam_vu_cs.png">
-      </a>
-     </div>
-     <div class="footer-col-right">
-      <a href="mailto:igem17.ams@gmail.com" target="_top">
-       <img class="footer-sponsor-img" src="https://static.igem.org/mediawiki/2017/a/a0/Email_logo.jpg">
-       </img>
-      </a>
-      <a href="https://www.facebook.com/igem2017amsterdam/" target="_blank">
-       <img class="footer-sponsor-img" src="https://static.igem.org/mediawiki/2017/0/07/Facebook_logo.png">
         </img>
        </a>
       </div>
+     <!--//
+        <div class="footer-col-right">
+          <a href="mailto:igem17.ams@gmail.com" target="_top">
+            <img src="/images/email_logo.jpg" class="footer-sponsor-img">
+          </a>
+          <a href="https://www.facebook.com/igem2017amsterdam/" target="_blank">
+            <img src="/images/facebook_logo.png" class="footer-sponsor-img">
+          </a>
+        </div>
+        //-->
      </div>
     </div>

Difference between revisions of "Team:Amsterdam/Produce"

Latest revision as of 19:52, 15 December 2017

Overview

Highlights

References