Difference between revisions of "Team:NAWI Graz/Description"

(Prototype team page)
 
Line 1: Line 1:
 
{{NAWI_Graz}}
 
{{NAWI_Graz}}
 
<html>
 
<html>
 +
 +
Abstract
 +
The aim of the project is to create a robot-bacteria interface in which information processing is done by a bacterial culture that exhibits a feedback loop with a mobile robot. In this concrete case changes in pH and a corresponding change in fluorescence of the bacterial culture are the means by which communication is achieved. Additionally, one of the fluorescence proteins we use is under control of an acid inducible promotor, which we aim to further develop and characterize.
 +
 +
Introduction
 +
An important area at the cutting edge of technology is the integration of biological systems in mechanical and automated systems. For our iGEM project we therefore chose to take a new approach on the integration of biology into technology. Our goal is the creation of a bacteria computer interface that acts in a constant feedback loop. We create a pH sensitive E. coli strain that expresses detectable proteins according to a pH level. The pH level is determined by the position of a mobile robot in an arena with a virtual pH gradient. The pH level of the robot's position is passed on to bacteria that grow in a bioreactor, as a response to the pH shift, a shift in protein expression is made due to pH sensitive promoters. This altered expression correlates with a change in color, due to a change in expression, that is detectable with an optical system. The data from the optical signal is then send back to the robot resulting in a response in form of a directional change. Thus, we can control the motion of the robot through the arena with a constant feedback loop to the bioreactor. Furthermore, it is planned, to characterize and develop one of the used pH sensitive promotors, as a Biobrick.
 +
 +
Detailed project description
 +
It is planned to design a pH-sensitive E. coli strain with two different plasmids. Each of the plasmids contains a pH sensitive promotor. The promotors are induced by different pH levels. An acidic pH leads to the expression of a red fluorecent protein and an alkaline pH to a green fluorecent protein.
 +
Both fluorecent proteins contain a N-terminal TEV-site followed by a F-degron. The TEV-site, which allows the degradation by the TEV-protease. The F-degron should increase the velocity of the degradation of the fluorecent protein by recruiting endogenous ClpAP machinery. This is important to provide a faster color change due to pH shift.
 +
The TEV-protease is integrated into the genome by CRISPR/Cas9. Due to the assay, it is necessary that the proteins are produced and degraded very fast. Therefor, the protein exhibits a quick maturation time. Based on the combination of the TEV-protease and a quick maturation time, it is possible to gain rather quick changes of the fluorescence in the media.
 +
The fluorescent signals are detected by a camera, leading to maneuvering the robot through an arena. Depending on the fluorescent color of the media, the robot turns either left or right.
 +
For a better performance of transcription and expression the acid-inducable asr-promotor should be characterized and further developed. Therefor, it is planned to mutate some regions, like the RBS (ribosome binding site) of the promotor to optimized it.
 +
 +
Applications and Implications
 +
One of the possible applications could be a bioreactor with bacteria that control their environment via active feedback. Meaning that the bacterias give a signal, if they are in need for a different media composition, for example if more nutrients or a switch of the pH level become necessary bacteria indicate it and a robot automatically adapts the medium to the circumstances.
 +
The technology also holds potential in the creation of reusable biosensors or a controlled bioremediation effort, where bacteria are mobile due to the connection to a robot host.
 +
  
  

Revision as of 17:15, 13 June 2017

Abstract The aim of the project is to create a robot-bacteria interface in which information processing is done by a bacterial culture that exhibits a feedback loop with a mobile robot. In this concrete case changes in pH and a corresponding change in fluorescence of the bacterial culture are the means by which communication is achieved. Additionally, one of the fluorescence proteins we use is under control of an acid inducible promotor, which we aim to further develop and characterize. Introduction An important area at the cutting edge of technology is the integration of biological systems in mechanical and automated systems. For our iGEM project we therefore chose to take a new approach on the integration of biology into technology. Our goal is the creation of a bacteria computer interface that acts in a constant feedback loop. We create a pH sensitive E. coli strain that expresses detectable proteins according to a pH level. The pH level is determined by the position of a mobile robot in an arena with a virtual pH gradient. The pH level of the robot's position is passed on to bacteria that grow in a bioreactor, as a response to the pH shift, a shift in protein expression is made due to pH sensitive promoters. This altered expression correlates with a change in color, due to a change in expression, that is detectable with an optical system. The data from the optical signal is then send back to the robot resulting in a response in form of a directional change. Thus, we can control the motion of the robot through the arena with a constant feedback loop to the bioreactor. Furthermore, it is planned, to characterize and develop one of the used pH sensitive promotors, as a Biobrick. Detailed project description It is planned to design a pH-sensitive E. coli strain with two different plasmids. Each of the plasmids contains a pH sensitive promotor. The promotors are induced by different pH levels. An acidic pH leads to the expression of a red fluorecent protein and an alkaline pH to a green fluorecent protein. Both fluorecent proteins contain a N-terminal TEV-site followed by a F-degron. The TEV-site, which allows the degradation by the TEV-protease. The F-degron should increase the velocity of the degradation of the fluorecent protein by recruiting endogenous ClpAP machinery. This is important to provide a faster color change due to pH shift. The TEV-protease is integrated into the genome by CRISPR/Cas9. Due to the assay, it is necessary that the proteins are produced and degraded very fast. Therefor, the protein exhibits a quick maturation time. Based on the combination of the TEV-protease and a quick maturation time, it is possible to gain rather quick changes of the fluorescence in the media. The fluorescent signals are detected by a camera, leading to maneuvering the robot through an arena. Depending on the fluorescent color of the media, the robot turns either left or right. For a better performance of transcription and expression the acid-inducable asr-promotor should be characterized and further developed. Therefor, it is planned to mutate some regions, like the RBS (ribosome binding site) of the promotor to optimized it. Applications and Implications One of the possible applications could be a bioreactor with bacteria that control their environment via active feedback. Meaning that the bacterias give a signal, if they are in need for a different media composition, for example if more nutrients or a switch of the pH level become necessary bacteria indicate it and a robot automatically adapts the medium to the circumstances. The technology also holds potential in the creation of reusable biosensors or a controlled bioremediation effort, where bacteria are mobile due to the connection to a robot host.

Description

Tell us about your project, describe what moves you and why this is something important for your team.

What should this page contain?
  • A clear and concise description of your project.
  • A detailed explanation of why your team chose to work on this particular project.
  • References and sources to document your research.
  • Use illustrations and other visual resources to explain your project.
Advice on writing your Project Description

We encourage you to put up a lot of information and content on your wiki, but we also encourage you to include summaries as much as possible. If you think of the sections in your project description as the sections in a publication, you should try to be consist, accurate and unambiguous in your achievements.

Judges like to read your wiki and know exactly what you have achieved. This is how you should think about these sections; from the point of view of the judge evaluating you at the end of the year.

References

iGEM teams are encouraged to record references you use during the course of your research. They should be posted somewhere on your wiki so that judges and other visitors can see how you thought about your project and what works inspired you.

Inspiration

See how other teams have described and presented their projects: